Amazon has
10-Count 14.5″ x 10″ Amazon Basics Car Sound Deadening Mat on sale for
$13.74.
Shipping is free w/ Prime or on $35+ orders.
Thanks to Deal Hunter
phoinix for sharing this deal.
About this product:
- Sound deadening mat made of butyl rubber compound substrate
- Strong self-adhesive backing for secure placement
- Reflective aluminum foil on front for thermal insulation
- Each piece measures 14.5" x 10"
- Total coverage area 10 square feet
Top Comments
Community Reviews
This Amazon Basics sound deadening mat is a thin butyl foil sheet that works best for reducing rattles and higher frequency noise in cars, cabinets, and other metal enclosures. It can make a trunk, NAS, or metal cabinet noticeably quieter, and the 10 square feet is enough for many smaller jobs. The main tradeoffs are heavy labor to install, careful surface prep, and limited help for subwoofer vibration or permanent door installs. It is also described as less robust than premium damping products, though still useful for extra soundproofing.
Common Questions (5)
It can reduce trunk rattle and exhaust drone, especially on the trunk floor and spare-tire area. It is better at high-frequency noise and general panel damping than at low-frequency subwoofer vibration.
The pack provides 10 square feet total, which is enough for many smaller jobs like a trunk, cabinet, or a few NAS panels. It is less economical per square foot than larger 36-sq-ft packs, but the smaller amount can still be a good buy if you only need limited coverage.
It is not a good choice for a permanent door install, and it will not do much for subwoofer vibration. It works better for sealing gaps and damping thinner panels, while door seals or thicker rubber materials are better for low-frequency problems.
It can smell initially, but the odor may fade over time and some installs report no noticeable smell in the trunk. Using it inside enclosed areas can raise drive temperatures, so it is better suited to exterior panel damping than heat-sensitive internal installs.
Installation is labor-intensive, and prep matters as much as the install itself. Clean the surface well, apply it evenly, then use a roller or firm pressure to remove air and improve adhesion.
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
38 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
Our community has rated this post as helpful. If you agree, why not thank
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
Our community has rated this post as helpful. If you agree, why not thank
(Nothing special about these specific pads, other than getting a small pack fit relatively cheap per ft)
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!