Our research indicates that this offer is $24.11 lower (40% savings) than the next best available price from a reputable merchant with prices starting from $59.99
About this store:
Don't have Amazon Prime? Students can get a free 6-Month Amazon Prime trial with free 2-day shipping, unlimited video streaming & more.
This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
Our research indicates that this offer is $24.11 lower (40% savings) than the next best available price from a reputable merchant with prices starting from $59.99
About this store:
Don't have Amazon Prime? Students can get a free 6-Month Amazon Prime trial with free 2-day shipping, unlimited video streaming & more.
Keep in mind that you don't have to upgrade your router, or your whole network to support 2.5G speeds. You could plug two 2.5G devices into these two ports, and they could talk to each other at 2.5G, and the rest of the network at 1G. My internet is 1G, so I really only need to connect to my server at 2.5G.
The ugreen 2.5 posted the other day is a better deal. Sure, it only has 5 ports but all 5 ports are 2.5Gbe for $34. Just got it in and replaced an old 1Gbe switch.
This D-Link switch is a low-cost way to add a small 2.5GbE segment to a mostly gigabit network. The two 2.5GbE ports can link a server or other fast device at 2.5G while the five remaining ports stay at 1G, and Cat5e can still handle 2.5G. The main drawback is the port mix, since one 2.5GbE port is effectively needed for uplink, leaving only one usable multi-gig port. It fits best when you only need a modest speed boost rather than a full multi-gig switch.
Home lab builders connecting one server to a main workstation, because the 2.5G ports can carry fast device-to-device traffic while the rest of the network stays at gigabit.
Homelab owners planning to expand into more multi-gig devices, because one 2.5G port is effectively consumed by uplink and leaves very little headroom.
Users expecting plug-and-play 2.5G performance on every setup, because 2.5G can be sensitive to cable quality, drivers, firmware, and Energy-Efficient Ethernet settings.
It is limited if you want several multi-gig endpoints, because one 2.5GbE port is typically consumed by the uplink. If you want all ports at 2.5GbE, a different switch such as a 5-port all-2.5GbE model may be a better fit.
Yes. It is a 7-port unmanaged switch with 2 x 2.5GbE ports and 5 x 1GbE ports, so only two devices can connect at multi-gig speed. One of those 2.5GbE ports is often used as the uplink, leaving just one 2.5GbE port for a local device.
Yes, but it is usually overkill for streaming alone. Typical 4K streaming uses far less than 1GbE, so the switch is more useful for moving files between a server and a workstation or for other local multi-gig transfers.
Yes. Cat5e can carry 2.5GbE, so existing Cat5e runs may work without rewiring. For more demanding 10GbE gear, higher-quality Cat6a or Cat7 cables are recommended because signal noise becomes more of an issue.
No. You can connect just two 2.5GbE devices to the switch and they can talk to each other at 2.5GbE while the rest of the network stays at 1GbE. That makes it useful as a small multi-gig upgrade for a server, workstation, or a few high-speed devices.
Our community has rated this post as helpful. If you agree, why not thank
Keep in mind that you don't have to upgrade your router, or your whole network to support 2.5G speeds. You could plug two 2.5G devices into these two ports, and they could talk to each other at 2.5G, and the rest of the network at 1G. My internet is 1G, so I really only need to connect to my server at 2.5G.
Anyone have a recommendation for a good/reasonably priced 10g switch?
Define 10g. https://www.amazon.com/dp/B0C5D4MYRF
variants of this are like 30 bucks. That gets me 10g from server to main workstation, and 2.5g from server to the rest of the network.
damn. this would be like a half step in the direction i want to go. its price is good, but only 2 multi-gig ports. i can see myself with buyers regret fairly soon if i get my other projects off the ground and want that added speed for more devices in my homelab. sure i can get by on this for now, but its like buying to the limits of my current setup. and even leaves me only 1 free port after everything else is plugged in.
1
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
D-Link products are exteremly reliable, with netflix,hulu,disney+ and other ott 4k viewing experiences 2G is definite addon for work and entertainement. Great price.
i have a weird situation. i have ethernet running through my home and have a unmanaged switch however when i connect ethernet cable in my office into the wall it doesn't pull any ethernet network. is there any tool that someone can recommend to test the wall switch if its working properly?
i have a weird situation. i have ethernet running through my home and have a unmanaged switch however when i connect ethernet cable in my office into the wall it doesn't pull any ethernet network. is there any tool that someone can recommend to test the wall switch if its working properly?
If you haven't shopped for switches in a while, you'd be surprised how cheap some of the off-brand multi-port 2.5 gig switches are (5-port, 8-port).
I bout a 5port and 8port off brand. They were trash. Had to constantly power cycle them. Switched to ubiquity 2.5gb switches and no more issues.
Proceed with caution with off brand 2.5gb switches.
What makes it a gaming switch? It's a nice switch, I just don't understand "gaming" in the description. Switches don't care what you're using them for.
Top Comments
Community Reviews
This D-Link switch is a low-cost way to add a small 2.5GbE segment to a mostly gigabit network. The two 2.5GbE ports can link a server or other fast device at 2.5G while the five remaining ports stay at 1G, and Cat5e can still handle 2.5G. The main drawback is the port mix, since one 2.5GbE port is effectively needed for uplink, leaving only one usable multi-gig port. It fits best when you only need a modest speed boost rather than a full multi-gig switch.
Common Questions (5)
It is limited if you want several multi-gig endpoints, because one 2.5GbE port is typically consumed by the uplink. If you want all ports at 2.5GbE, a different switch such as a 5-port all-2.5GbE model may be a better fit.
Yes. It is a 7-port unmanaged switch with 2 x 2.5GbE ports and 5 x 1GbE ports, so only two devices can connect at multi-gig speed. One of those 2.5GbE ports is often used as the uplink, leaving just one 2.5GbE port for a local device.
Yes, but it is usually overkill for streaming alone. Typical 4K streaming uses far less than 1GbE, so the switch is more useful for moving files between a server and a workstation or for other local multi-gig transfers.
Yes. Cat5e can carry 2.5GbE, so existing Cat5e runs may work without rewiring. For more demanding 10GbE gear, higher-quality Cat6a or Cat7 cables are recommended because signal noise becomes more of an issue.
No. You can connect just two 2.5GbE devices to the switch and they can talk to each other at 2.5GbE while the rest of the network stays at 1GbE. That makes it useful as a small multi-gig upgrade for a server, workstation, or a few high-speed devices.
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
38 Comments
Sign up for a Slickdeals account to remove this ad.
https://www.amazon.com/MikroTik-C...B0DPR8KLV6
Our community has rated this post as helpful. If you agree, why not thank
https://www.amazon.com/dp/B0C5D4MYRF
variants of this are like 30 bucks. That gets me 10g from server to main workstation, and 2.5g from server to the rest of the network.
Sign up for a Slickdeals account to remove this ad.
https://www.amazon.com/Ethernet-C...0925826M2/
If they're busted, you can usually just chop the ends off and redo them, assuming you have enough slack and a crimper tool.
Proceed with caution with off brand 2.5gb switches.
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!