Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
Missed This Deal? Get alerts when similar deals are posted.
expired
phoinix 16.1K Views
Apr 7, 2026 6:58 PM

7-Port D-Link 2.5GB Unmanaged Gaming Switch

$36

$60

40% off
+ Free S&Hat Amazon
Visit Amazon
Good Deal?
38Comments
Save
Share
Deal Details
Amazon has 7-Port D-Link 2.5GB Unmanaged Gaming Switch with 2 x 2.5G, 5 x 10/100/1000 Mbps (DMS-107) for $35.88. Shipping is free.

Thanks to Deal Hunter phoinix for finding this deal.

Features:
  • 5 x Gigabit Ethernet ports, 2 x 2.5 Gbps Ethernet Ports
  • Metal housing with fanless design
  • QoS support
  • Environmentally friendly
  • Ideal for Wi-Fi 6

Editor's Notes

Written by powerfuldoppler | Staff
  • About this deal:
    • Our research indicates that this offer is $24.11 lower (40% savings) than the next best available price from a reputable merchant with prices starting from $59.99
  • About this store:

Original Post

Written by phoinix
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Amazon has 7-Port D-Link 2.5GB Unmanaged Gaming Switch with 2 x 2.5G, 5 x 10/100/1000 Mbps (DMS-107) for $35.88. Shipping is free.

Thanks to Deal Hunter phoinix for finding this deal.

Features:
  • 5 x Gigabit Ethernet ports, 2 x 2.5 Gbps Ethernet Ports
  • Metal housing with fanless design
  • QoS support
  • Environmentally friendly
  • Ideal for Wi-Fi 6

Editor's Notes

Written by powerfuldoppler | Staff
  • About this deal:
    • Our research indicates that this offer is $24.11 lower (40% savings) than the next best available price from a reputable merchant with prices starting from $59.99
  • About this store:

Original Post

Written by phoinix

Community Voting

Deal Score
+46
Good Deal
Bad Deal

Top Comments

Community Reviews

This D-Link switch is a low-cost way to add a small 2.5GbE segment to a mostly gigabit network. The two 2.5GbE ports can link a server or other fast device at 2.5G while the five remaining ports stay at 1G, and Cat5e can still handle 2.5G. The main drawback is the port mix, since one 2.5GbE port is effectively needed for uplink, leaving only one usable multi-gig port. It fits best when you only need a modest speed boost rather than a full multi-gig switch.

Common Questions (5)

  • It is limited if you want several multi-gig endpoints, because one 2.5GbE port is typically consumed by the uplink. If you want all ports at 2.5GbE, a different switch such as a 5-port all-2.5GbE model may be a better fit.

  • Yes. It is a 7-port unmanaged switch with 2 x 2.5GbE ports and 5 x 1GbE ports, so only two devices can connect at multi-gig speed. One of those 2.5GbE ports is often used as the uplink, leaving just one 2.5GbE port for a local device.

  • Yes, but it is usually overkill for streaming alone. Typical 4K streaming uses far less than 1GbE, so the switch is more useful for moving files between a server and a workstation or for other local multi-gig transfers.

  • Yes. Cat5e can carry 2.5GbE, so existing Cat5e runs may work without rewiring. For more demanding 10GbE gear, higher-quality Cat6a or Cat7 cables are recommended because signal noise becomes more of an issue.

  • No. You can connect just two 2.5GbE devices to the switch and they can talk to each other at 2.5GbE while the rest of the network stays at 1GbE. That makes it useful as a small multi-gig upgrade for a server, workstation, or a few high-speed devices.

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

38 Comments

Sign up for a Slickdeals account to remove this ad.

Apr 9, 2026 2:47 PM
4.5K Comments
Joined Apr 2004
SlikkuApr 9, 2026 2:47 PM
4.5K Comments

Our community has rated this post as helpful. If you agree, why not thank

This is a two-port 2.5Gb switch with five 1Gb add-on ports.
3
Pro
Apr 9, 2026 3:50 PM
5.4K Comments
Joined Jun 2006
KO3bIPb
Pro
Apr 9, 2026 3:50 PM
5.4K Comments
Quote from ChocolateMooJuice View quoted comment :
Anyone have a recommendation for a good/reasonably priced 10g switch?
I got these a year ago.
No complaints, getting 50-75% real world performance on 10Gb ports, 2.5 are unused.
$80
4x2.5Gb + 2x10Gb
https://www.amazon.com/dp/B0DS4KC7Y3?th=1

2x $63
Marvel AQC113 controller NICs for low power
https://www.amazon.com/10G-PCI-e4...0FM2DH49B/

I also got Cat8 cables because why not it's $7. Ok, $14 for two.
https://www.amazon.com/dp/B08PL1P53C?th=1
Last edited by KO3bIPb April 9, 2026 at 10:17 AM.
1
Apr 9, 2026 3:56 PM
1.5K Comments
Joined Dec 2003
GolgathaApr 9, 2026 3:56 PM
1.5K Comments
Quote from Slikku View quoted comment :
This is a two-port 2.5Gb switch with five 1Gb add-on ports.
Really it's a 2.5g backbone (you have to use one port for the 2.5g uplink) for your 1g ports and effectively a pass-through for the single, usable 2.5g port.
1
Apr 9, 2026 4:01 PM
1K Comments
Joined Dec 2010
webjockApr 9, 2026 4:01 PM
1K Comments

Our community has rated this post as helpful. If you agree, why not thank

The ugreen 2.5 posted the other day is a better deal. Sure, it only has 5 ports but all 5 ports are 2.5Gbe for $34. Just got it in and replaced an old 1Gbe switch.
2
Apr 9, 2026 4:03 PM
916 Comments
Joined Mar 2004
wyldtekApr 9, 2026 4:03 PM
916 Comments

Our community has rated this post as helpful. If you agree, why not thank

Meh If I'm getting a 2.5 GB switch i want them all the have at least 2.5
2
Apr 9, 2026 5:00 PM
16.3K Comments
Joined Jan 2010
Ride_The_SkyApr 9, 2026 5:00 PM
16.3K Comments
Quote from Gappler View quoted comment :
damn. this would be like a half step in the direction i want to go. its price is good, but only 2 multi-gig ports. i can see myself with buyers regret fairly soon if i get my other projects off the ground and want that added speed for more devices in my homelab. sure i can get by on this for now, but its like buying to the limits of my current setup. and even leaves me only 1 free port after everything else is plugged in.
I agree. Not sure why this has only 2 ports. One will be in and one out. That's it. I would wait for more 2.5 ports.
1
Apr 9, 2026 5:43 PM
5.7K Comments
Joined Dec 2014
wiffleApr 9, 2026 5:43 PM
5.7K Comments
Quote from friendly_dad View quoted comment :
I bout a 5port and 8port off brand. They were trash. Had to constantly power cycle them. Switched to ubiquity 2.5gb switches and no more issues.
Proceed with caution with off brand 2.5gb switches.
Not this one but I got a cheap 2.5x5 one off Amazon for $22 and I haven't had any issues.
1

Sign up for a Slickdeals account to remove this ad.

Apr 9, 2026 5:45 PM
5.7K Comments
Joined Dec 2014
wiffleApr 9, 2026 5:45 PM
5.7K Comments
Quote from SeanFrank View quoted comment :
Keep in mind that you don't have to upgrade your router, or your whole network to support 2.5G speeds. You could plug two 2.5G devices into these two ports, and they could talk to each other at 2.5G, and the rest of the network at 1G. My internet is 1G, so I really only need to connect to my server at 2.5G.
I didn't know this until a few months ago, got a cheap 5 port, and went from 105Mbps to 190Mbps.
Apr 9, 2026 6:19 PM
4K Comments
Joined Nov 2005
FierceDeityLinkApr 9, 2026 6:19 PM
4K Comments
Quote from KO3bIPb View quoted comment :
I got these a year ago.
No complaints, getting 50-75% real world performance on 10Gb ports, 2.5 are unused.
$80
4x2.5Gb + 2x10Gb
https://www.amazon.com/dp/B0DS4KC7Y3?th=1

2x $63
Marvel AQC113 controller NICs for low power
https://www.amazon.com/10G-PCI-e4...0FM2DH49B/

I also got Cat8 cables because why not it's $7. Ok, $14 for two.
https://www.amazon.com/dp/B08PL1P53C?th=1
I would recommend Realtek 8127 over AQC113. About $35 on AliExpress. I had an AQC113 and it would randomly stop working until I disabled/enabled the interface (also it would be a bit slow to start up from boot/wake), and if you Google around, there's a lot of other reports of the same issue.
Apr 9, 2026 7:44 PM
192 Comments
Joined Dec 2017
ddrantApr 9, 2026 7:44 PM
192 Comments
Quote from EagerWinter9500 View quoted comment :
Give this Klein tool a go:

https://www.amazon.com/Ethernet-C...0925826M2/

If they're busted, you can usually just chop the ends off and redo them, assuming you have enough slack and a crimper tool.
If you're budget crunched, try this:

https://www.amazon.com/Optimal-Sh...B072LJYHKP

I started with something like the above, and although I eventually upgraded to the Klein tool (I ended up running physical Ethernet to every room in the house) the cheap tool is enough to do basic diagnostics.
1
Apr 9, 2026 8:36 PM
2.5K Comments
Joined Feb 2008
pcman2000Apr 9, 2026 8:36 PM
2.5K Comments
Quote from friendly_dad View quoted comment :
I bout a 5port and 8port off brand. They were trash. Had to constantly power cycle them. Switched to ubiquity 2.5gb switches and no more issues.
Proceed with caution with off brand 2.5gb switches.
Was just going to recommend the Ubiquiti Flex 2.5 also. B&H for one still has them at $49 with free shipping. They are also manageable if that is of interest.
1
Apr 9, 2026 9:11 PM
101 Comments
Joined Dec 2024
AmusedPenguin4181Apr 9, 2026 9:11 PM
101 Comments
Wired is the only way to game!
Apr 10, 2026 1:40 AM
1.3K Comments
Joined Dec 2009
chefpApr 10, 2026 1:40 AM
1.3K Comments
Only 2x 2.5 GbE ports is almost pointless. Have to use one for uplink, leaving only 1 remaining. Very niche use case product.
1
Pro
Apr 10, 2026 3:03 AM
5.4K Comments
Joined Jun 2006
KO3bIPb
Pro
Apr 10, 2026 3:03 AM
5.4K Comments
Quote from FierceDeityLink View quoted comment :
I would recommend Realtek 8127 over AQC113. About $35 on AliExpress. I had an AQC113 and it would randomly stop working until I disabled/enabled the interface (also it would be a bit slow to start up from boot/wake), and if you Google around, there's a lot of other reports of the same issue.
Common Fixes:
  • Disable EEE: In Device Manager, set "Energy-Efficient Ethernet" to "Disabled".
  • Update Drivers: Use the latest drivers from Marvell/Aquantia or your motherboard manufacturer (e.g., ASUS).
  • Update Firmware: Check for newer firmware, particularly for ASUS Z790/X870 boards.
  • Cable Check: Use high-quality Cat6a or Cat7 cables, as 10G is sensitive to signal noise.
1

Sign up for a Slickdeals account to remove this ad.

Apr 10, 2026 3:21 AM
4K Comments
Joined Nov 2005
FierceDeityLinkApr 10, 2026 3:21 AM
4K Comments
Quote from KO3bIPb View quoted comment :
Common Fixes:
  • Disable EEE: In Device Manager, set "Energy-Efficient Ethernet" to "Disabled".
  • Update Drivers: Use the latest drivers from Marvell/Aquantia or your motherboard manufacturer (e.g., ASUS).
  • Update Firmware: Check for newer firmware, particularly for ASUS Z790/X870 boards.
  • Cable Check: Use high-quality Cat6a or Cat7 cables, as 10G is sensitive to signal noise.
Thanks ChatGPT, but I should have said that I tried all the common fixes. I even designed and 3D printed a fan mount for it just in case it was overheating. I wouldn't be surprised if it's some obtuse combination of hardware/software that causes it to stop working randomly, though. It did seem like it was better in Linux, but it did crash a few times but seemingly not as often. And it would still take a minute to start up.
1

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!