Our research indicates that this offer is $24.11 lower (40% savings) than the next best available price from a reputable merchant with prices starting from $59.99
About this store:
Don't have Amazon Prime? Students can get a free 6-Month Amazon Prime trial with free 2-day shipping, unlimited video streaming & more.
This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
Our research indicates that this offer is $24.11 lower (40% savings) than the next best available price from a reputable merchant with prices starting from $59.99
About this store:
Don't have Amazon Prime? Students can get a free 6-Month Amazon Prime trial with free 2-day shipping, unlimited video streaming & more.
Keep in mind that you don't have to upgrade your router, or your whole network to support 2.5G speeds. You could plug two 2.5G devices into these two ports, and they could talk to each other at 2.5G, and the rest of the network at 1G. My internet is 1G, so I really only need to connect to my server at 2.5G.
The ugreen 2.5 posted the other day is a better deal. Sure, it only has 5 ports but all 5 ports are 2.5Gbe for $34. Just got it in and replaced an old 1Gbe switch.
This D-Link switch is a low-cost way to add a small 2.5GbE segment to a mostly gigabit network. The two 2.5GbE ports can link a server or other fast device at 2.5G while the five remaining ports stay at 1G, and Cat5e can still handle 2.5G. The main drawback is the port mix, since one 2.5GbE port is effectively needed for uplink, leaving only one usable multi-gig port. It fits best when you only need a modest speed boost rather than a full multi-gig switch.
Home lab builders connecting one server to a main workstation, because the 2.5G ports can carry fast device-to-device traffic while the rest of the network stays at gigabit.
Homelab owners planning to expand into more multi-gig devices, because one 2.5G port is effectively consumed by uplink and leaves very little headroom.
Users expecting plug-and-play 2.5G performance on every setup, because 2.5G can be sensitive to cable quality, drivers, firmware, and Energy-Efficient Ethernet settings.
It is limited if you want several multi-gig endpoints, because one 2.5GbE port is typically consumed by the uplink. If you want all ports at 2.5GbE, a different switch such as a 5-port all-2.5GbE model may be a better fit.
Yes. It is a 7-port unmanaged switch with 2 x 2.5GbE ports and 5 x 1GbE ports, so only two devices can connect at multi-gig speed. One of those 2.5GbE ports is often used as the uplink, leaving just one 2.5GbE port for a local device.
Yes, but it is usually overkill for streaming alone. Typical 4K streaming uses far less than 1GbE, so the switch is more useful for moving files between a server and a workstation or for other local multi-gig transfers.
Yes. Cat5e can carry 2.5GbE, so existing Cat5e runs may work without rewiring. For more demanding 10GbE gear, higher-quality Cat6a or Cat7 cables are recommended because signal noise becomes more of an issue.
No. You can connect just two 2.5GbE devices to the switch and they can talk to each other at 2.5GbE while the rest of the network stays at 1GbE. That makes it useful as a small multi-gig upgrade for a server, workstation, or a few high-speed devices.
Define 10g. https://www.amazon.com/dp/B0C5D4MYRF
variants of this are like 30 bucks. That gets me 10g from server to main workstation, and 2.5g from server to the rest of the network.
Thanks ChatGPT, but I should have said that I tried all the common fixes. I even designed and 3D printed a fan mount for it just in case it was overheating. I wouldn't be surprised if it's some obtuse combination of hardware/software that causes it to stop working randomly, though. It did seem like it was better in Linux, but it did crash a few times but seemingly not as often. And it would still take a minute to start up.
lol yes ok But thats what i did - and as i said, no issues after a year. Maybe i got lucky...
edit:
Or maybe it's the cables as i read marvel is sensitive to packet loss?
:tide
Define 10g. https://www.amazon.com/dp/B0C5D4MYRFvariants of this are like 30 bucks. That gets me 10g from server to main workstation, and 2.5g from server to the rest of the network.
Correct me if I'm wrong...
But for switches like what you linked, it would also require the purchase of SFP to RJ45 transceivers to make use of the 10g ports.
Only 2x 2.5 GbE ports is almost pointless. Have to use one for uplink, leaving only 1 remaining. Very niche use case product.
Not really that niche? Many devices are limited to gigabit, but you can have multiple full gigabit connections to a server with a 2.5g card, or 5 half gigabit, which would be at most 2 links at that speed on a gigabit switch. I'd rather use this to connect to TVs, set top boxes, smart device hubs, and anything limited to gigabit rather than wasting a 2.5g port from a more expensive switch.
D-Link products are exteremly reliable, with netflix,hulu,disney+ and other ott 4k viewing experiences 2G is definite addon for work and entertainement. Great price.
Not commenting on the product at all, but mainstream streaming services are the last reason to worry about upgrading to multi gig services. The highest bitrate spikes for 4k remuxes are probably in the 200 mbps range, and that's only for a brief moment. Average bitrates are closer to 100 mbps or less. And again, that's for a remux. Big streaming services are rarely using more than 20-25 mbps for 4k, meaning a gigabit connection could easily support 20 4k netflix streams and still have like 500 mbps left over.
1
Like
Helpful
Funny
Not helpful
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
Top Comments
Community Reviews
This D-Link switch is a low-cost way to add a small 2.5GbE segment to a mostly gigabit network. The two 2.5GbE ports can link a server or other fast device at 2.5G while the five remaining ports stay at 1G, and Cat5e can still handle 2.5G. The main drawback is the port mix, since one 2.5GbE port is effectively needed for uplink, leaving only one usable multi-gig port. It fits best when you only need a modest speed boost rather than a full multi-gig switch.
Common Questions (5)
It is limited if you want several multi-gig endpoints, because one 2.5GbE port is typically consumed by the uplink. If you want all ports at 2.5GbE, a different switch such as a 5-port all-2.5GbE model may be a better fit.
Yes. It is a 7-port unmanaged switch with 2 x 2.5GbE ports and 5 x 1GbE ports, so only two devices can connect at multi-gig speed. One of those 2.5GbE ports is often used as the uplink, leaving just one 2.5GbE port for a local device.
Yes, but it is usually overkill for streaming alone. Typical 4K streaming uses far less than 1GbE, so the switch is more useful for moving files between a server and a workstation or for other local multi-gig transfers.
Yes. Cat5e can carry 2.5GbE, so existing Cat5e runs may work without rewiring. For more demanding 10GbE gear, higher-quality Cat6a or Cat7 cables are recommended because signal noise becomes more of an issue.
No. You can connect just two 2.5GbE devices to the switch and they can talk to each other at 2.5GbE while the rest of the network stays at 1GbE. That makes it useful as a small multi-gig upgrade for a server, workstation, or a few high-speed devices.
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
38 Comments
Sign up for a Slickdeals account to remove this ad.
https://www.amazon.com/dp/B0C5D4MYRF
variants of this are like 30 bucks. That gets me 10g from server to main workstation, and 2.5g from server to the rest of the network.
🥺
edit:
Or maybe it's the cables as i read marvel is sensitive to packet loss?
:tide
But for switches like what you linked, it would also require the purchase of SFP to RJ45 transceivers to make use of the 10g ports.
On sale for $101 but, 8 x 2.5gb ports.
Getting over $100, I am going to start looking for 10gb devices...
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!