frontpage
Falcon 5W CR-Laser Engraver and Cutter
$94
$299
68% off
+ Free S&Hat CrealityFalcon
+ Free S&Hat CrealityFalconDeal Details
CrealityFalcon has Falcon 5W CR-Laser Engraver and Cutter on sale for $99 - $4.95 when you apply discount code WELCOME5 at checkout = $94.05. Shipping is free.
Thanks to community member thethingx for sharing this deal.
Note: Laser Safety Glasses_180-534nm for All Laser Engravers and Cutters is automatically added to cart and is free with this purchase (link for reference).
Features:
Thanks to community member thethingx for sharing this deal.
Note: Laser Safety Glasses_180-534nm for All Laser Engravers and Cutters is automatically added to cart and is free with this purchase (link for reference).
Features:
- Ultra-Fine Engraving Precision: 0.06mm laser spot
- Speeds up to 10,000 mm/min.
- Larger working area of 400x415mm
- Equipped with an eye-protective cover on laser head
Editor's Notes
Written by qwikwit | Staff- Our research indicates that this deal is $30.95 less (24.7% savings) than the next best available price from a reputable merchant with prices starting from $125 at the time of this post.
- Rated 4.78 out of 5 stars, based on limited customer reviews.
- Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
CrealityFalcon has Falcon 5W CR-Laser Engraver and Cutter on sale for $99 - $4.95 when you apply discount code WELCOME5 at checkout = $94.05. Shipping is free.
Thanks to community member thethingx for sharing this deal.
Note: Laser Safety Glasses_180-534nm for All Laser Engravers and Cutters is automatically added to cart and is free with this purchase (link for reference).
Features:
Thanks to community member thethingx for sharing this deal.
Note: Laser Safety Glasses_180-534nm for All Laser Engravers and Cutters is automatically added to cart and is free with this purchase (link for reference).
Features:
- Ultra-Fine Engraving Precision: 0.06mm laser spot
- Speeds up to 10,000 mm/min.
- Larger working area of 400x415mm
- Equipped with an eye-protective cover on laser head
Editor's Notes
Written by qwikwit | Staff- Our research indicates that this deal is $30.95 less (24.7% savings) than the next best available price from a reputable merchant with prices starting from $125 at the time of this post.
- Rated 4.78 out of 5 stars, based on limited customer reviews.
- Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
Community Voting
Deal
Score
+104
Good Deal
Bad Deal
Top Comments
You will also need some things to engrave. Amazon is a decent place for thin cork sheets, thin wood for engraving/cutting, and slate for coasters or small signs.
Community Reviews
This Falcon 5W diode laser looks like a solid starter engraver for wood, opaque plastics, painted metal, and other flat materials. The community notes it can remove paint from metal tags, mark stainless steel by discoloring or coating removal, and handle simple projects like labels and small signs. Setup often needs extras such as eye protection, ventilation, a honeycomb bed, and air assist, and LightBurn is repeatedly favored over the included software. The main limit is power, since 5W is too weak for true metal engraving or cutting and curved surfaces are harder. A practical pick if you want to learn laser engraving without jumping to a higher power machine.
Common Questions (5)
LightBurn is not required, but it is widely preferred because the included software is described as harder to use. The free trial has no feature lockout beyond usage time, and a full license may need to be budgeted separately.
It will not etch chrome or most metals directly. It can discolor or remove paint/coating on painted metal, and metal-marking sprays like CerMark may help, but 5W 455nm diode lasers still struggle with true metal engraving.
It is best suited for wood, opaque polymers, thin cork, thin wood, slate, and similar materials. Flat polymer surfaces are workable, but curved parts are difficult, and 5W power is limited for heavier cutting jobs.
Yes, CFNY10 or CFNY8 can stack with WELCOME5, and shoppers reported prices like $79.05, $89.10, and $170 before tax on the 10W version. A separate 10% code may cancel out when combined with another 10% coupon.
It can blind you, start fires, and produce harmful fumes from unsafe materials like PVC, so it should be attended or placed in a safe burn-down area. Eye protection, an enclosure, and proper ventilation are strongly recommended, and certified laser safety glasses are preferred over the included cheap pair.
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
61 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
Our community has rated this post as helpful. If you agree, why not thank
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
I was looking at this for aluminum and steel but from what I read you need a 20w laser engraver for most metals.
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!