This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
The Monolith M12 v2 is a huge, heavy subwoofer that delivers serious bass and looks like a standout value for the output. Setup reports describe clean, punchy low end, strong performance in surround systems, and enough headroom to get loud once calibrated correctly. The main catch is power, since this EU and UK version is 220 to 240 volt and needs a transformer, dedicated 240 volt wiring, or a hardware conversion to run on US power. It is a bargain if you can handle the electrical side and the size.
DIYers comfortable with a 240V setup, because it can run from a dedicated 240V outlet or a properly sized step-up transformer.
Bass fans who want a compact-looking bargain, because the 12-inch cabinet is still described as a beast with output that feels far bigger than its size.
The deal may be time-sensitive because stock and pricing appear uncertain, including reports of the price changing and the item showing no stock afterward.
Yes, a step-up transformer can power it, and several setups report it working well. A 3000W/3000VA unit is the common recommendation for headroom; smaller converters may work, but undersizing can cause heat or clipping.
It is very large for a 12-inch sub and is described as heavier and bulkier than expected, with some comparing its enclosure size to a 12-15 inch class cabinet. Freight delivery and two-person handling were mentioned because the shipment can be around 136 lb on a skid.
No. The EU/UK version is rated for 220-240V, 50/60Hz, and the board is not set up to run on 120V as-is. US buyers need either a step-up transformer, a 240V outlet, or a hardware conversion to use it safely.
Yes, it is repeatedly described as a beast with very strong output, especially after proper setup and calibration. Owners say it adds a lot of sub bass to surround systems and can sound clean with punch and rumble.
Yes. The reported EU/UK-to-US conversion uses a jumper and fuse change, and one parts list says it can be done for about $10 with Digikey parts. After the conversion, it powers up on 120V normally.
Fedex called and asked if I had a way to get it off the truck. They said its 136lbs with a skid? It costs extra to lower it?
If they could give me a time, I could have my brother help me lift it off, but since its just a generic 9-6, I will probably be by myself.
How is everyone else dealing with this?
I ordered 2, so they were both strapped to one skid. They were delivered via liftgate truck, so the driver dropped it down for me and even helped me move it into my garage.
Except monoprice days not to use a converter and it will damage it... sheesh... reading comprehension had gone down a lot here...
LOLLLLLLLLLLLLLLLLLL
now look at all these people who got great deals because they listened to me and not you.
Things work great out of the box just with a transformer.
It was clearly price mistaked for shipping being free. These things cost a fortune to ship VIA FREIGHT. Look at freight charges.
Congrats on everyone who decided to jump in and get this and not listen to the guy above and a big haha to those who thumbs down me earlier and gave this guy a thumbs up
This is likely to be the subwoofer deal not just of this year but will stand for a good while
now look at all these people who got great deals because they listened to me and not you.
Things work great out of the box just with a transformer.
It was clearly price mistaked for shipping being free. These things cost a fortune to ship VIA FREIGHT. Look at freight charges.
Congrats on everyone who decided to jump in and get this and not listen to the guy above and a big haha to those who thumbs down me earlier and gave this guy a thumbs up
This is likely to be the subwoofer deal not just of this year but will stand for a good while
Do you really think Monoprice is paying $281(including the pallet) to ship these things? If so, I feel bad that I am only paying MP $19, and Fedex Freight is getting $281.
I wonder why they are shipping freight? It looks like you can ship up to 150lbs on UPS and FedEx before going to freight.
now look at all these people who got great deals because they listened to me and not you.
Things work great out of the box just with a transformer.
It was clearly price mistaked for shipping being free. These things cost a fortune to ship VIA FREIGHT. Look at freight charges.
Congrats on everyone who decided to jump in and get this and not listen to the guy above and a big haha to those who thumbs down me earlier and gave this guy a thumbs up
This is likely to be the subwoofer deal not just of this year but will stand for a good while
Which receptable (and possibly adapters) did you use, and where did you get it (them) from?
I used the power cord which I posted earlier in this thread.
This is a much cleaner solution than a transformer adapter, but it requires you have the ability to run 240V to your intended location. In my use case, this is a subwoofer for my outbuilding where I have already wired for 240V, so all it took was a new cord.
For those who don't know what they are doing electrically, you CANNOT simply plug this into a standard 120V household receptacle. Also: None of the 3 power cords provided in the box will work with any readily available 240V plug/receptacle. This is why I recommended a new cord similar to the one I provided a link to. You can also make your own power cord by purchasing just a standard NEMA 240V plug and cutting off the end of one of the monoprice plugs provided.
People who have a dedicated receptacle already wired in their media room could rewire that outlet for 240 by simply replacing the receptacle and swapping to a properly rated 240V breaker in the panelboard.
Last edited by TheMaster May 7, 2026 at 09:04 AM.
1
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
I used the power cord which I posted earlier in this thread.
This is a much cleaner solution than a transformer adapter, but it requires you have the ability to run 240V to your intended location. In my use case, this is a subwoofer for my outbuilding where I have already wired for 240V, so all it took was a new cord.
For those who don't know what they are doing electrically, you CANNOT simply plug this into a standard 120V household receptacle. Also: None of the 3 power cords provided in the box will work with any readily available 240V plug/receptacle. This is why I recommended a new cord similar to the one I provided a link to. You can also make your own power cord by purchasing just a standard NEMA 240V plug and cutting off the end of one of the monoprice plugs provided.
People who have a dedicated receptacle already wired in their media room could rewire that outlet for 240 by simply replacing the receptacle and swapping to a properly rated 240V breaker in the panelboard.
Thanks, missed your original link, and didn't realize the output was simply a C13 style. I will be running a 240v dedicated line to a new receptacle and using the cord you linked to.
Mine works great with a step up transformer (3000w), had to configure my avr from scratch and turn the gain up on the sub to really get the response I wanted. The m12 is harder to drive than my last sub. But man is the base crazy good. The high density fiber board is great
Mine works great with a step up transformer (3000w), had to configure my avr from scratch and turn the gain up on the sub to really get the response I wanted. The m12 is harder to drive than my last sub. But man is the base crazy good. The high density fiber board is great
https://www.homedepot.com/p/VEVOR.../339225044
This is the converter that I bought. It works great and is silent. I bought two M12's and have them both plugged to the one converter and it doesn't even break a sweat. After recalibrating my AVR and adjusting settings, these things get LOUD. For $700 all in for two M12's and the power converter, this is for sure one of the best subwoofer deals Ive seen and taken advantage of.
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
https://www.homedepot.com/p/VEVOR.../339225044
This is the converter that I bought. It works great and is silent. I bought two M12's and have them both plugged to the one converter and it doesn't even break a sweat. After recalibrating my AVR and adjusting settings, these things get LOUD. For $700 all in for two M12's and the power converter, this is for sure one of the best subwoofer deals Ive seen and taken advantage of.
I thought of buying that one too... but ended up with that Amazon tonchean one.
The sub came with 3 power cords, Which power cord are you using?
Like
Helpful
Funny
Not helpful
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
Community Reviews
The Monolith M12 v2 is a huge, heavy subwoofer that delivers serious bass and looks like a standout value for the output. Setup reports describe clean, punchy low end, strong performance in surround systems, and enough headroom to get loud once calibrated correctly. The main catch is power, since this EU and UK version is 220 to 240 volt and needs a transformer, dedicated 240 volt wiring, or a hardware conversion to run on US power. It is a bargain if you can handle the electrical side and the size.
Common Questions (5)
Yes, a step-up transformer can power it, and several setups report it working well. A 3000W/3000VA unit is the common recommendation for headroom; smaller converters may work, but undersizing can cause heat or clipping.
It is very large for a 12-inch sub and is described as heavier and bulkier than expected, with some comparing its enclosure size to a 12-15 inch class cabinet. Freight delivery and two-person handling were mentioned because the shipment can be around 136 lb on a skid.
No. The EU/UK version is rated for 220-240V, 50/60Hz, and the board is not set up to run on 120V as-is. US buyers need either a step-up transformer, a 240V outlet, or a hardware conversion to use it safely.
Yes, it is repeatedly described as a beast with very strong output, especially after proper setup and calibration. Owners say it adds a lot of sub bass to surround systems and can sound clean with punch and rumble.
Yes. The reported EU/UK-to-US conversion uses a jumper and fuse change, and one parts list says it can be done for about $10 with Digikey parts. After the conversion, it powers up on 120V normally.
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
94 Comments
Sign up for a Slickdeals account to remove this ad.
If they could give me a time, I could have my brother help me lift it off, but since its just a generic 9-6, I will probably be by myself.
How is everyone else dealing with this?
now look at all these people who got great deals because they listened to me and not you.
Things work great out of the box just with a transformer.
It was clearly price mistaked for shipping being free. These things cost a fortune to ship VIA FREIGHT. Look at freight charges.
Congrats on everyone who decided to jump in and get this and not listen to the guy above and a big haha to those who thumbs down me earlier and gave this guy a thumbs up
This is likely to be the subwoofer deal not just of this year but will stand for a good while
now look at all these people who got great deals because they listened to me and not you.
Things work great out of the box just with a transformer.
It was clearly price mistaked for shipping being free. These things cost a fortune to ship VIA FREIGHT. Look at freight charges.
Congrats on everyone who decided to jump in and get this and not listen to the guy above and a big haha to those who thumbs down me earlier and gave this guy a thumbs up
This is likely to be the subwoofer deal not just of this year but will stand for a good while
I wonder why they are shipping freight? It looks like you can ship up to 150lbs on UPS and FedEx before going to freight.
LOLLLLLLLLLLLLLLLLLL
now look at all these people who got great deals because they listened to me and not you.
Things work great out of the box just with a transformer.
It was clearly price mistaked for shipping being free. These things cost a fortune to ship VIA FREIGHT. Look at freight charges.
Congrats on everyone who decided to jump in and get this and not listen to the guy above and a big haha to those who thumbs down me earlier and gave this guy a thumbs up
This is likely to be the subwoofer deal not just of this year but will stand for a good while
This is a much cleaner solution than a transformer adapter, but it requires you have the ability to run 240V to your intended location. In my use case, this is a subwoofer for my outbuilding where I have already wired for 240V, so all it took was a new cord.
For those who don't know what they are doing electrically, you CANNOT simply plug this into a standard 120V household receptacle. Also: None of the 3 power cords provided in the box will work with any readily available 240V plug/receptacle. This is why I recommended a new cord similar to the one I provided a link to. You can also make your own power cord by purchasing just a standard NEMA 240V plug and cutting off the end of one of the monoprice plugs provided.
People who have a dedicated receptacle already wired in their media room could rewire that outlet for 240 by simply replacing the receptacle and swapping to a properly rated 240V breaker in the panelboard.
Sign up for a Slickdeals account to remove this ad.
This is a much cleaner solution than a transformer adapter, but it requires you have the ability to run 240V to your intended location. In my use case, this is a subwoofer for my outbuilding where I have already wired for 240V, so all it took was a new cord.
For those who don't know what they are doing electrically, you CANNOT simply plug this into a standard 120V household receptacle. Also: None of the 3 power cords provided in the box will work with any readily available 240V plug/receptacle. This is why I recommended a new cord similar to the one I provided a link to. You can also make your own power cord by purchasing just a standard NEMA 240V plug and cutting off the end of one of the monoprice plugs provided.
People who have a dedicated receptacle already wired in their media room could rewire that outlet for 240 by simply replacing the receptacle and swapping to a properly rated 240V breaker in the panelboard.
I wonder why they sent it freight? Regular Fedex can deliver packages that are less than 150lbs. They had to send a giant truck here to deliver it.
Let me know whats the consensus on the transformer to buy.
I think most of the 3000w will work. mine doesn't even get warm and there isnt a sound at all
I think most of the 3000w will work. mine doesn't even get warm and there isnt a sound at all
This is the converter that I bought. It works great and is silent. I bought two M12's and have them both plugged to the one converter and it doesn't even break a sweat. After recalibrating my AVR and adjusting settings, these things get LOUD. For $700 all in for two M12's and the power converter, this is for sure one of the best subwoofer deals Ive seen and taken advantage of.
Sign up for a Slickdeals account to remove this ad.
This is the converter that I bought. It works great and is silent. I bought two M12's and have them both plugged to the one converter and it doesn't even break a sweat. After recalibrating my AVR and adjusting settings, these things get LOUD. For $700 all in for two M12's and the power converter, this is for sure one of the best subwoofer deals Ive seen and taken advantage of.
The sub came with 3 power cords, Which power cord are you using?
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!