Update: This popular deal is still available.
Topskyfurniture-US via Amazon has
TOPSKY Dual Motor Electric Height-Adjustable Standing Desk Frame (Black) for $199.99 - $88 (44%) off when you apply promo code
A8JXJOML at checkout =
$111.99.
Shipping is free.
- Note: You must be logged in to clip coupons and apply promo codes. If a code doesn't work right away, try applying it a few times across different interfaces such as mobile or desktop, as some codes may not apply consistently. If issues persist, refresh the page, re-enter the code, or revisit the cart before checking out.
Thanks to Deal Hunter
LolaBunny21 for finding this deal.
Features:
- Fits up to 70.8" x 31.5" Tabletops, up to 225-lbs
- Powerful dual-motor lift system for adjusting height smoothly, evenly and quickly at a speed of 1''/second with low noise
- The height of frame is adjustable from 27.6'' to 47.3''/70cm-120cm and width of frame from 43'' to 59''/108.8cm-150cm
- Save 3 memory positions
Top Comments
They offer to pay for removal of bad reviews. They sent numerous emails of increasing value, before I replied and rejected it.
Their customer service isn't great. I was sent a bad unit. I replaced within the return period with Amazon. TOPSKY then said I no longer have any warranty, because the replacement was the warranty.
Basically, they're okay with giving you a bad product. But if you're okay knowing that, go for it.
Community Reviews
This dual-motor standing desk frame is valued as a sturdy, frame-only base for custom tabletops, from IKEA tops and butcher block to heavy, oversized slabs. It has held up for years in several setups, including large monitors and even a treadmill desk conversion, and the adjustable width makes it flexible for future upgrades. The main cautions are wobble at maximum height and occasional reliability or support issues, including bad motors, controller failures, and slow replacement handling. It is best suited to buyers who want an affordable motorized frame and are comfortable sourcing and finishing their own top.
Common Questions (4)
Yes. It has been used successfully with IKEA wooden tabletops, IKEA EKBACKEN and SAELJAN tops, and butcher block tops from Floor & Decor, Home Depot, Lowe's, and Menards. Solid wood tops may need sanding, finishing, or stain before mounting.
Several long-term reports say it still works after years of use, including units from 2021 and one still running strong after 4 years. A controller failure was resolved with a replacement part, but there are also reports of bad motors or a lift mechanism stopping, so durability appears dependent on the specific unit.
Replacement parts can be provided, including a controller replacement that arrived about a week after the original failed. There are also reports that warranty coverage may be denied after a replacement unit, and that getting help can take extensive back-and-forth.
It can handle large, heavy tops, including a 98-inch Karlby at about 86 lb and a 72 x 30 x 1.25-inch butcher block with dual monitors and accessories. Stability is reported as best a few inches below maximum height, where wobble is reduced.
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
50 Comments
Sign up for a Slickdeals account to remove this ad.
But they're not cheap.
If you'd like a real solid wood countertop, you can get one at Home Depot, Lowe's, or Floor and Decor. Here's one that's already finished with a rounded front edge:
https://www.homedepot.c
I also used a butcher block (Hevea rubber wood) which is 72 inches wide, 30 inches deep and 1.25 thick. I have a 49" monitor and a 34" mounted to it, various external HDDs and misc clutter.
The motorized desk mount still functions the same as it did day 1. Admittedly, I only raise and lower it about 1-2 times a day, and some days not at all.
I bought a 24 x 6' Red Oak Benchtop from Menards and after doing a chamfer, sanding, stain, and a bit of cleanup it has been a fantastic surface to put over it. If you want to put in the work yourself, I recommend this as a base.
Sign up for a Slickdeals account to remove this ad.
I bought a 24 x 6' Red Oak Benchtop from Menards and after doing a chamfer, sanding, stain, and a bit of cleanup it has been a fantastic surface to put over it. If you want to put in the work yourself, I recommend this as a base.
NM, tried again, it worked!
Sign up for a Slickdeals account to remove this ad.
Some folks have complained about it feeling unstable at its max height. I will admit that I do notice this also, however for MY use, I never have it at the maximum height. I keep it a few inches below the max and it feels much stable. Maybe with a lighter (and shorter) countertop, it might feel more stable at its max height. But yeah, this desk has been solid for me.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!