This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
I have this case, picked it up the last time it was on sale for this price. Quality is OK (metal is pretty thin, as expected for a modern case at this price) but it is reasonably attractive. GPU was a tight fit but I did get it in there eventually (they include these plastic clips that you have to use to flatten out the 24 pin power cable, otherwise it won't fit under the card). One note about the fans: the RGB is not independently controllable; the colors are based solely on fan speed. Lowest speed is red and the faster they're running, the more colors you get. Also, it didn't have all the holes to set up every standoff for my Gigabyte board, but there were enough to make it reasonably solid.
The Zalman CUBIX-G is a budget mATX case that stands out for airflow and a compact, attractive look, especially with the included RGB fans glowing through the diffused front. The case can fit a full build, but GPU clearance is tight, the 24-pin cable may need the included plastic clips, and the fans are not addressable, so the lighting is tied to fan speed. Thin metal, vibration, and some rattling or fit issues come up repeatedly, and AIO support is not there. It is a low-cost case with a strong value pitch if the size limits and budget build quality are acceptable.
Builders of compact mATX gaming rigs with short graphics cards, because the case fits a full-size card only with careful cable routing and tight clearance.
Budget builders who want a basic, airflow-first case with visible RGB, because the front mesh and diffused lighting can look good without paying for premium materials.
At $30 with free shipping, it is considered a strong value if you want a brand-new mATX case and can live with budget materials. The tradeoffs are thin metal, possible vibration/rattle, and limited upgrade room for larger GPUs.
GPU clearance is tight and can be a limiting factor; a 317mm RTX 3080 Ti was reported not to fit despite the listed 280mm clearance. Even shorter cards can be a squeeze, and some builds needed cable flattening to clear the card.
Not with the included fans and cabling. The lighting is tied to fan speed rather than being independently controllable, so the practical options are to live with it or replace the fans; a disconnect hack may be possible.
No AIO support is reported for this case, so it is better suited to an air cooler build. That makes it a fit for compact, lower-TDP setups rather than liquid-cooled builds.
Compact Micro-ATX Design - Space-saving case ideal for budget gaming and clean desktop setups.
3 x Preinstalled FRGB Fans (3-pin DC) - Fixed RGB lighting with optimized airflow out of the box.
Hardware Support - Fits GPUs up to 280mm, ATX PSUs up to 140mm, and 155mm CPU air coolers.
HDD Support - Fits up to 3 x 2.5" HDD and 1 x 3.5" HDD (2 x 2.5" + 1 x Combo)
Modern Front I/O - Includes USB Type-C and USB 3.0 for fast connectivity.
Premium Look, Budget Friendly - Sleek design that delivers high-end style at an affordable price.
Our community has rated this post as helpful. If you agree, why not thank
I have this case, picked it up the last time it was on sale for this price. Quality is OK (metal is pretty thin, as expected for a modern case at this price) but it is reasonably attractive. GPU was a tight fit but I did get it in there eventually (they include these plastic clips that you have to use to flatten out the 24 pin power cable, otherwise it won't fit under the card). One note about the fans: the RGB is not independently controllable; the colors are based solely on fan speed. Lowest speed is red and the faster they're running, the more colors you get. Also, it didn't have all the holes to set up every standoff for my Gigabyte board, but there were enough to make it reasonably solid.
This is a genuinely well reviewed budget case. Be aware of that the RGB fans are not addressable so you are stuck with rainbow colors unless you want to change out all the fans.
I have this case, picked it up the last time it was on sale for this price. Quality is OK (metal is pretty thin, as expected for a modern case at this price) but it is reasonably attractive. GPU was a tight fit but I did get it in there eventually (they include these plastic clips that you have to use to flatten out the 24 pin power cable, otherwise it won't fit under the card). One note about the fans: the RGB is not independently controllable; the colors are based solely on fan speed. Lowest speed is red and the faster they're running, the more colors you get. Also, it didn't have all the holes to set up every standoff for my Gigabyte board, but there were enough to make it reasonably solid.
Also don't expect to be able to mount intake fans on the bottom inside the case. Holes are too small and not even those rubber fan holders worked. I flipped the fan on the right to be intake and helped with temps quite a bit. Barely fit several SKUs of the GTX 1080.
This is a cute case. Imma pair this up with 7500x3d deal i got from Microcenter the other day. Gonna go with an air cooler since TDP is only 65 watt on the CPU. Slap a 3080 this will be my 3rd gaming PC for WoW.
I bought that thing, it's garbage. The thinnest metal they could possibly use, and the glass panels vibrated from the fan resonance at certain rpms. maddening. Understandable for the price point I guess, but it's not very good imo.
3
2
1
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
I bought that thing, it's garbage. The thinnest metal they could possibly use, and the glass panels vibrated from the fan resonance at certain rpms. maddening. Understandable for the price point I guess, but it's not very good imo.
Case was very tempting when I saw it posted some months back. Unfortunately there's not enough clearance for my GPU. 280mm clearance while my GPU (a 3080Ti) is 317mm.
I bought this case a while back, paying a bit more than the current offering, but in the end, returned it. This case screams BUDGET. It is extreme in it's use of cheap materials, and your upgrade path is very limited due to it's GPU size restriction. Even at $30, I can't recommend it.
anyone know if you can turn off the fan lights on these?
Not with the included fans, no. I mean, you might be able to hack them up to disconnect the LEDs, but there's nothing you can do with the existing cabling. They're cheap fans.
Last edited by swechsler June 2, 2026 at 01:52 PM.
the glass panels vibrated from the fan resonance at certain rpms. maddening
I haven't experienced this, but I can see why it would happen. While the side glass is held in place with thumbscrews and rubber bushings, the front is just held on by a metal clip top and bottom, and it does rattle when tapped (this could also be a QC issue, but I can't imagine they have much QC on a $30 case). You could probably silence it with some thin rubber weatherstripping if you feel ambitious, but at that point you're probably better off buying a better case.
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
Top Comments
Community Reviews
The Zalman CUBIX-G is a budget mATX case that stands out for airflow and a compact, attractive look, especially with the included RGB fans glowing through the diffused front. The case can fit a full build, but GPU clearance is tight, the 24-pin cable may need the included plastic clips, and the fans are not addressable, so the lighting is tied to fan speed. Thin metal, vibration, and some rattling or fit issues come up repeatedly, and AIO support is not there. It is a low-cost case with a strong value pitch if the size limits and budget build quality are acceptable.
The case can work well for a budget build because it includes three 120mm FRGB fans and ships with free shipping at the $30 price point.
The included fans can still provide visible RGB lighting through the diffused front for a more airflow-focused setup.
The case can be reasonably solid for micro-ATX builds because it includes enough standoff hole coverage for some motherboards.
The case can be a workable option for air cooling builds since it is paired by some buyers with a 65W TDP CPU and an air cooler.
The RGB fans can lack independent control because colors are tied to fan speed rather than addressable lighting effects.
The case can have thin metal and glass panel vibration from fan resonance at certain RPMs, which can feel maddening during use.
The case can have limited GPU clearance because a 317mm GPU can fail to fit despite the listed 280mm clearance.
Bottom intake fan mounting can be difficult because the bottom holes can be too small for proper mounting and some fan holders may not work.
Common Questions (4)
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
26 Comments
Sign up for a Slickdeals account to remove this ad.
Compact Micro-ATX Design - Space-saving case ideal for budget gaming and clean desktop setups.
3 x Preinstalled FRGB Fans (3-pin DC) - Fixed RGB lighting with optimized airflow out of the box.
Hardware Support - Fits GPUs up to 280mm, ATX PSUs up to 140mm, and 155mm CPU air coolers.
HDD Support - Fits up to 3 x 2.5" HDD and 1 x 3.5" HDD (2 x 2.5" + 1 x Combo)
Modern Front I/O - Includes USB Type-C and USB 3.0 for fast connectivity.
Premium Look, Budget Friendly - Sleek design that delivers high-end style at an affordable price.
https://www.newegg.com/zalman-mic...0022-000R6
Our community has rated this post as helpful. If you agree, why not thank
Sign up for a Slickdeals account to remove this ad.
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!