On the
Creality blog [creality.com], there is an extra $5 discount code, HR0605OFF, for the Halot X1 and X1 Combo resin 3D printer. The X1 non-Combo is $344 after applying the code.
The X1 Combo includes the printer and the AFU (Auto Feed Unit), which can automatically refill and heat the resin, the price with the AFU is $364.
It comes with an extra pack of 5 extra NACF (a kind of upgraded ACF) release films and 5 ACF release films, which are consumables for the resin printer, so you would need them in the long term anyway (this many should last a long time).
I own the Halot X1 (without the AFU, the price difference was way bigger when I got it). Compared to the other resin 3D printers that I have, the quick release build plate design is quite useful, because you don't have to scrape prints off with a spatula anymore.
The printer has a 16K mono LCD screen and requires no leveling with the fixed build plate setup, which makes it a bit more beginner friendly. It also has a 92-zone adaptive exposure system that adjusts curing strength across the screen to improve print accuracy and reduce failed prints. The autofeed unit can automatically refill resin during long jobs and includes heating to keep resin at the right temperature for consistent flow and curing.
Specs:
- Build volume: 211.68 x 118.37 x 200 mm (about 8.3 x 4.7 x 7.9 in)
- Printer size: 344 x 331 x 434 mm (about 13.5 x 13 x 17.1 in)
- Pixel size: 14 x 19 microns
- Resolution: 16K (15120 x 6230 px)
- Layer height: 0.01-0.2 mm
- Print speed: up to 170 mm/h
- Z-axis accuracy: 0.01 mm
- Touchscreen: 3.98-inch display
- Connectivity: USB and Wi-Fi
- Software: HALOT BOX or Chitu Box
https://store.creality.com/produc...ee-films-3
Leave a Comment
0 Comments
Leave a Comment