Item 1 of 5
Item 1 of 5
frontpageTattyBear | Staff posted Jul 27, 2026 9:40 PM
AXTH 115-in-1 Precision Screwdriver & Repair Tool Kit
$9.60
$19
49% off
Amazon
AmazonDeal Details
hardware expert via Amazon has AXTH 115-in-1 Precision Screwdriver & Repair Tool Kit on sale for $15.99 - $6.40 (apply promo code K66Z7K7Y at checkout) = $9.59. Shipping is free with Prime or on $35+ orders.
Includes:
- Note: You must be logged in to clip coupons and apply promo codes. If a code doesn't work right away, try applying it a few times across different interfaces such as mobile or desktop, as some codes may not apply consistently. If issues persist, refresh the page, re-enter the code, or revisit the cart before checking out.
Includes:
- 101 Bits (4mm)
- Opening Picks
- Magnetizer-Demagnetizer
- Screwdriver
- Flexible Extension
- ESD Tweezer
- Opening Tools-1
- Opening Tools-1
- Opening Tools-3
- 1/4 Conversion Head
- Small Suction Cup
- Retrieve card pin
Editor's Notes
Written by megakimcheelove | Staff- This offer matches previous Front Page deal that earned 78+ thumbs up.
- Don't have Amazon Prime? Students can get a free 6-Month Amazon Prime trial with free 2-day shipping, unlimited video streaming & more.
- If you're not a student, there's also a free 1-Month Amazon Prime trial available.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
hardware expert via Amazon has AXTH 115-in-1 Precision Screwdriver & Repair Tool Kit on sale for $15.99 - $6.40 (apply promo code K66Z7K7Y at checkout) = $9.59. Shipping is free with Prime or on $35+ orders.
Includes:
- Note: You must be logged in to clip coupons and apply promo codes. If a code doesn't work right away, try applying it a few times across different interfaces such as mobile or desktop, as some codes may not apply consistently. If issues persist, refresh the page, re-enter the code, or revisit the cart before checking out.
Includes:
- 101 Bits (4mm)
- Opening Picks
- Magnetizer-Demagnetizer
- Screwdriver
- Flexible Extension
- ESD Tweezer
- Opening Tools-1
- Opening Tools-1
- Opening Tools-3
- 1/4 Conversion Head
- Small Suction Cup
- Retrieve card pin
Editor's Notes
Written by megakimcheelove | Staff- This offer matches previous Front Page deal that earned 78+ thumbs up.
- Don't have Amazon Prime? Students can get a free 6-Month Amazon Prime trial with free 2-day shipping, unlimited video streaming & more.
- If you're not a student, there's also a free 1-Month Amazon Prime trial available.
Community Voting
Deal Score
+31
Good Deal
Bad Deal
Found by ppxyz1
Forum Thread
26% off
Found by Rokket
Forum Thread
71% off
Found by Taco_Doomsday
Forum Thread
66% off
Found by NgocOutSavings
Forum Thread
41% off
Found by Dr.W
Forum Thread
28% off
Found by Rokket
Forum Thread
45% off
Found by Dmytro_B
Forum Thread
85% off
Top Comments
bit shape quality is poor so the bits don't fit as precisely as most bits should fit causing early cam-out which means you can't put as much torque on the screw with this compared to most good quality sets such as the IFIXIT sets which I prefer.
The metal quality is very poor which means the metal is softer and bends easier than good quality bits, so you can't put as much torque into the screw before you bend the tip of your bit.
The hex shank of these bits are too small compared to the hex driver so the bits wobble around quite a bit and since the bit's metal is very soft, the entire bit can round itself in the driver handle which happened to me when using the biggest allen bit when I was trying to tighten an allen screw. Literally all the bits have a shank that is very undersized so they all have this problem and sometimes get stuck in the driver handle if you try to torque something more than just lightly.
Do not buy a really cheap set like this because it does not work well. It is better to spend a little more on a decent set that actually works like it should and won't strip or bend tips so easily.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
6 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank HeyGuysChrisFixHere
- bit shape quality is poor so the bits don't fit as precisely as most bits should fit causing early cam-out which means you can't put as much torque on the screw with this compared to most good quality sets such as the IFIXIT sets which I prefer.
- The metal quality is very poor which means the metal is softer and bends easier than good quality bits, so you can't put as much torque into the screw before you bend the tip of your bit.
- The hex shank of these bits are too small compared to the hex driver so the bits wobble around quite a bit and since the bit's metal is very soft, the entire bit can round itself in the driver handle which happened to me when using the biggest allen bit when I was trying to tighten an allen screw. Literally all the bits have a shank that is very undersized so they all have this problem and sometimes get stuck in the driver handle if you try to torque something more than just lightly.
Do not buy a really cheap set like this because it does not work well. It is better to spend a little more on a decent set that actually works like it should and won't strip or bend tips so easily.https://www.amazon.com/Precision-...s_li_ss_tl
Need 25$ in cart for free shipping
- bit shape quality is poor so the bits don't fit as precisely as most bits should fit causing early cam-out which means you can't put as much torque on the screw with this compared to most good quality sets such as the IFIXIT sets which I prefer.
- The metal quality is very poor which means the metal is softer and bends easier than good quality bits, so you can't put as much torque into the screw before you bend the tip of your bit.
- The hex shank of these bits are too small compared to the hex driver so the bits wobble around quite a bit and since the bit's metal is very soft, the entire bit can round itself in the driver handle which happened to me when using the biggest allen bit when I was trying to tighten an allen screw. Literally all the bits have a shank that is very undersized so they all have this problem and sometimes get stuck in the driver handle if you try to torque something more than just lightly.
Do not buy a really cheap set like this because it does not work well. It is better to spend a little more on a decent set that actually works like it should and won't strip or bend tips so easily.Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!