Item 1 of 4
Item 1 of 4
popularJoshC7121 posted Today 1:46 PM
Newly released Creality I7 Nano, and 4kg filament $299
$299
$373
19% off
eBay
eBayDeal Details
Creality store via eBay has the Creality I7 Nano on sale! Lists for $373, using coupon NEWFINDS20 makes it $299 with a make offer option.
Key Specifications & FeaturesBuild Volume: 260 × 260 × 255 mm
Maximum Speed: Up to 500 mm/sNozzle Temperature: Up to 300°C (hardened steel quick-swap nozzle)
Extruder Type: Direct drive
Leveling: Full-auto leveling
AI Capabilities: Built-in AI camera for spaghetti and failure detection
Operation Modes: Quiet night mode (~45 dB or lower)
Nano Configuration Highlights
Space-Saving Design: Spools mount directly on the frame rather than sitting on a separate table footprint.
Filament Management: Supports auto-feed, auto-retract, and auto-refill capabilities to switch spools seamlessly.
Beginner Focused: Pre-assembled structure allowing fast setup out of the box
https://www.ebay.com/itm/377372850752
Key Specifications & FeaturesBuild Volume: 260 × 260 × 255 mm
Maximum Speed: Up to 500 mm/sNozzle Temperature: Up to 300°C (hardened steel quick-swap nozzle)
Extruder Type: Direct drive
Leveling: Full-auto leveling
AI Capabilities: Built-in AI camera for spaghetti and failure detection
Operation Modes: Quiet night mode (~45 dB or lower)
Nano Configuration Highlights
Space-Saving Design: Spools mount directly on the frame rather than sitting on a separate table footprint.
Filament Management: Supports auto-feed, auto-retract, and auto-refill capabilities to switch spools seamlessly.
Beginner Focused: Pre-assembled structure allowing fast setup out of the box
https://www.ebay.com/itm/377372850752
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Creality store via eBay has the Creality I7 Nano on sale! Lists for $373, using coupon NEWFINDS20 makes it $299 with a make offer option.
Key Specifications & FeaturesBuild Volume: 260 × 260 × 255 mm
Maximum Speed: Up to 500 mm/sNozzle Temperature: Up to 300°C (hardened steel quick-swap nozzle)
Extruder Type: Direct drive
Leveling: Full-auto leveling
AI Capabilities: Built-in AI camera for spaghetti and failure detection
Operation Modes: Quiet night mode (~45 dB or lower)
Nano Configuration Highlights
Space-Saving Design: Spools mount directly on the frame rather than sitting on a separate table footprint.
Filament Management: Supports auto-feed, auto-retract, and auto-refill capabilities to switch spools seamlessly.
Beginner Focused: Pre-assembled structure allowing fast setup out of the box
https://www.ebay.com/itm/377372850752
Key Specifications & FeaturesBuild Volume: 260 × 260 × 255 mm
Maximum Speed: Up to 500 mm/sNozzle Temperature: Up to 300°C (hardened steel quick-swap nozzle)
Extruder Type: Direct drive
Leveling: Full-auto leveling
AI Capabilities: Built-in AI camera for spaghetti and failure detection
Operation Modes: Quiet night mode (~45 dB or lower)
Nano Configuration Highlights
Space-Saving Design: Spools mount directly on the frame rather than sitting on a separate table footprint.
Filament Management: Supports auto-feed, auto-retract, and auto-refill capabilities to switch spools seamlessly.
Beginner Focused: Pre-assembled structure allowing fast setup out of the box
https://www.ebay.com/itm/377372850752
Community Voting
Deal Score
+8
Good Deal
Bad Deal
Found by Rokket
Forum Thread
52% off
Found by phoinix
Forum Thread
18% off
Found by Dmytro_B
Forum Thread
26% off
Found by neomatrixviper
Forum Thread
Found by BBQchicken
Forum Thread
14% off
Found by NeedMoCoffee
Forum Thread
72% off
Found by pennysave
Forum Thread
22% off
Found by niki4h
Forum Thread
58% off
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
11 Comments
Sign up for a Slickdeals account to remove this ad.
https://www.ebay.com/itm/377372850752
This may be YMMV, but I was able to get it down to $268 by using "make offer" earlier this morning. I made an offer of $335 and after using the coupon NEWFINDS20 , my pre-tax total came to $268. Just make sure to apply the coupon before clicking "send offer". The offer was immediately accepted. See screenshot.
Really nice deal IMO. The 4kg filament is the RFID Hyper PLA, so that is a nice value.
I was going to post the deal, but you beat me to it
p.s. No, I was not awake at 5:30am that you see on the screenshot. It was 8:30 by me
This may be YMMV, but I was able to get it down to $268 by using "make offer" earlier this morning. I made an offer of $335 and after using the coupon NEWFINDS20 , my pre-tax total came to $268. Just make sure to apply the coupon before clicking "send offer". The offer was immediately accepted. See screenshot.
Really nice deal IMO. The 4kg filament is the RFID Hyper PLA, so that is a nice value.
I was going to post the deal, but you beat me to it
p.s. No, I was not awake at 5:30am that you see on the screenshot. It was 8:30 by me
OP, you forgot to put the price in the title
This may be YMMV, but I was able to get it down to $268 by using "make offer" earlier this morning. I made an offer of $335 and after using the coupon NEWFINDS20 , my pre-tax total came to $268. Just make sure to apply the coupon before clicking "send offer". The offer was immediately accepted. See screenshot.
Really nice deal IMO. The 4kg filament is the RFID Hyper PLA, so that is a nice value.
I was going to post the deal, but you beat me to it
p.s. No, I was not awake at 5:30am that you see on the screenshot. It was 8:30 by me
If the price is competitive with other recent sales, the free filament makes this an even better value. It's a great option for printing decorative models, cosplay parts, household items, and prototypes without having to purchase filament separately.
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!