Item 1 of 4
Item 1 of 4
frontpageJoshC7121 posted Yesterday 1:46 PM
Creality SPARKX i7 Nano Combo 3D Printer w/ 4x 1kg Hyper PLA RFID Filament
$299
$374
20% off
+ Free S&Hat eBay
+ Free S&Hat eBayDeal Details
creality-official-store via eBay has Creality SPARKX i7 Nano Combo 3D Printer w/ 4x 1kg Hyper PLA RFID Filament on sale for $373.75 - $74.75 (20%) when you apply coupon code NEWFINDS20 at checkout = $299. Shipping is free.
Thanks to Community Member JoshC7121 for sharing this deal.
Product Details:
Thanks to Community Member JoshC7121 for sharing this deal.
Product Details:
- Build Volume: 260 Ă— 260 Ă— 255 mm
- Maximum Speed: Up to 500 mm/s
- Nozzle Temperature: Up to 300°C (hardened steel quick-swap nozzle)
- Extruder Type: Direct drive
- Leveling: Full-auto leveling
- AI Capabilities: Built-in AI camera for spaghetti and failure detection
- Operation Modes: Quiet night mode (~45 dB or lower)
- Space-Saving Design: Spools mount directly on the frame rather than sitting on a separate table footprint.
- Filament Management: Supports auto-feed, auto-retract, and auto-refill capabilities to switch spools seamlessly.
- Beginner Focused: Pre-assembled structure allowing fast setup out of the box
Editor's Notes
Written by Nate650 | Staff- About this deal:
- Our research indicates that this deal is $11 less (33.3% savings) than the next best available price from a reputable merchant with prices starting from $33 at the time of this post.
- About this product:
- About this store:
- 30 days returns. Seller pays for return shipping.
- Additional notes:
- Please see the original post for additional details & give the wiki and additional forum comments a read for helpful discussion.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
creality-official-store via eBay has Creality SPARKX i7 Nano Combo 3D Printer w/ 4x 1kg Hyper PLA RFID Filament on sale for $373.75 - $74.75 (20%) when you apply coupon code NEWFINDS20 at checkout = $299. Shipping is free.
Thanks to Community Member JoshC7121 for sharing this deal.
Product Details:
Thanks to Community Member JoshC7121 for sharing this deal.
Product Details:
- Build Volume: 260 Ă— 260 Ă— 255 mm
- Maximum Speed: Up to 500 mm/s
- Nozzle Temperature: Up to 300°C (hardened steel quick-swap nozzle)
- Extruder Type: Direct drive
- Leveling: Full-auto leveling
- AI Capabilities: Built-in AI camera for spaghetti and failure detection
- Operation Modes: Quiet night mode (~45 dB or lower)
- Space-Saving Design: Spools mount directly on the frame rather than sitting on a separate table footprint.
- Filament Management: Supports auto-feed, auto-retract, and auto-refill capabilities to switch spools seamlessly.
- Beginner Focused: Pre-assembled structure allowing fast setup out of the box
Editor's Notes
Written by Nate650 | Staff- About this deal:
- Our research indicates that this deal is $11 less (33.3% savings) than the next best available price from a reputable merchant with prices starting from $33 at the time of this post.
- About this product:
- About this store:
- 30 days returns. Seller pays for return shipping.
- Additional notes:
- Please see the original post for additional details & give the wiki and additional forum comments a read for helpful discussion.
Community Voting
Deal Score
+20
Good Deal
Bad Deal
Found by phoinix
Forum Thread
Found by phoinix
Forum Thread
30% off
Found by Dmytro_B
Forum Thread
45% off
Found by Eragorn
Forum Thread
25% off
Found by shivster1796
Forum Thread
45% off
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
17 Comments
Sign up for a Slickdeals account to remove this ad.
https://www.ebay.com/itm/377372850752
This may be YMMV, but I was able to get it down to $268 by using "make offer" earlier this morning. I made an offer of $335 and after using the coupon NEWFINDS20 , my pre-tax total came to $268. Just make sure to apply the coupon before clicking "send offer". The offer was immediately accepted. See screenshot.
Really nice deal IMO. The 4kg filament is the RFID Hyper PLA, so that is a nice value.
I was going to post the deal, but you beat me to it
p.s. No, I was not awake at 5:30am that you see on the screenshot. It was 8:30 by me
This may be YMMV, but I was able to get it down to $268 by using "make offer" earlier this morning. I made an offer of $335 and after using the coupon NEWFINDS20 , my pre-tax total came to $268. Just make sure to apply the coupon before clicking "send offer". The offer was immediately accepted. See screenshot.
Really nice deal IMO. The 4kg filament is the RFID Hyper PLA, so that is a nice value.
I was going to post the deal, but you beat me to it
p.s. No, I was not awake at 5:30am that you see on the screenshot. It was 8:30 by me
OP, you forgot to put the price in the title
This may be YMMV, but I was able to get it down to $268 by using "make offer" earlier this morning. I made an offer of $335 and after using the coupon NEWFINDS20 , my pre-tax total came to $268. Just make sure to apply the coupon before clicking "send offer". The offer was immediately accepted. See screenshot.
Really nice deal IMO. The 4kg filament is the RFID Hyper PLA, so that is a nice value.
I was going to post the deal, but you beat me to it
p.s. No, I was not awake at 5:30am that you see on the screenshot. It was 8:30 by me
If the price is competitive with other recent sales, the free filament makes this an even better value. It's a great option for printing decorative models, cosplay parts, household items, and prototypes without having to purchase filament separately.
Sign up for a Slickdeals account to remove this ad.
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!