frontpage
Creality SPARKX i7 Nano Combo 3D Printer w/ 4x 1kg Hyper PLA RFID Filament
$299
$374
20% off
+ Free S&Hat eBay
+ Free S&Hat eBayDeal Details
creality-official-store via eBay has Creality SPARKX i7 Nano Combo 3D Printer w/ 4x 1kg Hyper PLA RFID Filament on sale for $373.75 - $74.75 (20%) when you apply coupon code NEWFINDS20 at checkout = $299. Shipping is free.
Thanks to Community Member JoshC7121 for sharing this deal.
Product Details:
Thanks to Community Member JoshC7121 for sharing this deal.
Product Details:
- Build Volume: 260 × 260 × 255 mm
- Maximum Speed: Up to 500 mm/s
- Nozzle Temperature: Up to 300°C (hardened steel quick-swap nozzle)
- Extruder Type: Direct drive
- Leveling: Full-auto leveling
- AI Capabilities: Built-in AI camera for spaghetti and failure detection
- Operation Modes: Quiet night mode (~45 dB or lower)
- Space-Saving Design: Spools mount directly on the frame rather than sitting on a separate table footprint.
- Filament Management: Supports auto-feed, auto-retract, and auto-refill capabilities to switch spools seamlessly.
- Beginner Focused: Pre-assembled structure allowing fast setup out of the box
Editor's Notes
Written by Nate650 | Staff- About this deal:
- Our research indicates that this deal is $11 less (33.3% savings) than the next best available price from a reputable merchant with prices starting from $33 at the time of this post.
- About this product:
- About this store:
- 30 days returns. Seller pays for return shipping.
- Additional notes:
- Please see the original post for additional details & give the wiki and additional forum comments a read for helpful discussion.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
creality-official-store via eBay has Creality SPARKX i7 Nano Combo 3D Printer w/ 4x 1kg Hyper PLA RFID Filament on sale for $373.75 - $74.75 (20%) when you apply coupon code NEWFINDS20 at checkout = $299. Shipping is free.
Thanks to Community Member JoshC7121 for sharing this deal.
Product Details:
Thanks to Community Member JoshC7121 for sharing this deal.
Product Details:
- Build Volume: 260 × 260 × 255 mm
- Maximum Speed: Up to 500 mm/s
- Nozzle Temperature: Up to 300°C (hardened steel quick-swap nozzle)
- Extruder Type: Direct drive
- Leveling: Full-auto leveling
- AI Capabilities: Built-in AI camera for spaghetti and failure detection
- Operation Modes: Quiet night mode (~45 dB or lower)
- Space-Saving Design: Spools mount directly on the frame rather than sitting on a separate table footprint.
- Filament Management: Supports auto-feed, auto-retract, and auto-refill capabilities to switch spools seamlessly.
- Beginner Focused: Pre-assembled structure allowing fast setup out of the box
Editor's Notes
Written by Nate650 | Staff- About this deal:
- Our research indicates that this deal is $11 less (33.3% savings) than the next best available price from a reputable merchant with prices starting from $33 at the time of this post.
- About this product:
- About this store:
- 30 days returns. Seller pays for return shipping.
- Additional notes:
- Please see the original post for additional details & give the wiki and additional forum comments a read for helpful discussion.
Community Voting
Deal
Score
+43
Good Deal
Bad Deal
Community Reviews
Creality's ISPARKX 7 Nano bundle stands out as a compact multi color printer package, especially for first time users and anyone wanting to print decorative models, cosplay parts, household items, or prototypes. The included 4 kilogram RFID Hyper PLA adds real value, and the bundle has been bought down from the listed price with the NEWFINDS20 coupon and a make offer workflow. The Nano keeps the same bed and print size as the larger SparkX i7 while taking up less space because the MMS unit is external. A few notes matter, including delayed shipment for the CFS Nano kit and reports of a printer that needed restarting after every print.
The deal can drop to about $268 when an offer is accepted quickly and the NEWFINDS20 coupon is applied before sending.
The bundle includes four full-size rolls of RFID Hyper PLA, which reduces the need to buy filament separately.
The included RFID Hyper PLA makes the package especially useful for multi-color printing and beginner-friendly projects like prototypes and cosplay parts.
The i7 Nano design keeps the same bed plate and print size while using a more compact external MMS setup.
The printer may require a restart after every print even after firmware updates or downgrades, which can create extra waste.
The CFS NANO kit in the combo may ship about a week later because it can be out of stock, delaying the full bundle.
The value timing may be affected if newer 4th-gen multi-tool printers arrive soon around the ~$400 range.
The MMS enclosure may not be fully sealed, so humidity protection may be less important unless the environment is very humid.
Common Questions (5)
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
29 Comments
Sign up for a Slickdeals account to remove this ad.
https://www.ebay.com/itm/377372850752
This may be YMMV, but I was able to get it down to $268 by using "make offer" earlier this morning. I made an offer of $335 and after using the coupon NEWFINDS20 , my pre-tax total came to $268. Just make sure to apply the coupon before clicking "send offer". The offer was immediately accepted. See screenshot.
Really nice deal IMO. The 4kg filament is the RFID Hyper PLA, so that is a nice value.
I was going to post the deal, but you beat me to it
p.s. No, I was not awake at 5:30am that you see on the screenshot. It was 8:30 by me
This may be YMMV, but I was able to get it down to $268 by using "make offer" earlier this morning. I made an offer of $335 and after using the coupon NEWFINDS20 , my pre-tax total came to $268. Just make sure to apply the coupon before clicking "send offer". The offer was immediately accepted. See screenshot.
Really nice deal IMO. The 4kg filament is the RFID Hyper PLA, so that is a nice value.
I was going to post the deal, but you beat me to it
p.s. No, I was not awake at 5:30am that you see on the screenshot. It was 8:30 by me
OP, you forgot to put the price in the title
This may be YMMV, but I was able to get it down to $268 by using "make offer" earlier this morning. I made an offer of $335 and after using the coupon NEWFINDS20 , my pre-tax total came to $268. Just make sure to apply the coupon before clicking "send offer". The offer was immediately accepted. See screenshot.
Really nice deal IMO. The 4kg filament is the RFID Hyper PLA, so that is a nice value.
I was going to post the deal, but you beat me to it
p.s. No, I was not awake at 5:30am that you see on the screenshot. It was 8:30 by me
If the price is competitive with other recent sales, the free filament makes this an even better value. It's a great option for printing decorative models, cosplay parts, household items, and prototypes without having to purchase filament separately.
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!