Sensor Panel Link: Onboard video port for in-chassis panel setup.
Rear I/O Ports:
2x USB4 Type-C (DisplayPort Alt Mode)
1x HDMI
4x USB-A (rear, count per product listing)
1x 2.5GbE LAN
1x WiFi 7 Antenna Connector (WIFI EZ-Plug)
1x 3.5mm Audio Jacks (rear audio stack)
Community Notes
This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
I have this board and its great for an all white build. A few things to remember:
1. If you use both the middle M2 slots then it reduces the speed of the top PCie slot by half. (16x -> 8x)
2. Only the top slot is pcie 5
3. The RGB on your system may keep flashing until the Gigabyte control center starts up in windows. Dont panic.
4. DO NOT INSTALL THE RGB FIRMWARE UPDATE FROM GIGABYTE AS IT WILL BRICK YOUR RGB SYSTEMWIDE AND TURN THEM PINK. There is a way to unbrick it but it isnt very easy.
Like
Helpful
Funny
Not helpful
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
1 Comment
Sign up for a Slickdeals account to remove this ad.
1. If you use both the middle M2 slots then it reduces the speed of the top PCie slot by half. (16x -> 8x)
2. Only the top slot is pcie 5
3. The RGB on your system may keep flashing until the Gigabyte control center starts up in windows. Dont panic.
4. DO NOT INSTALL THE RGB FIRMWARE UPDATE FROM GIGABYTE AS IT WILL BRICK YOUR RGB SYSTEMWIDE AND TURN THEM PINK. There is a way to unbrick it but it isnt very easy.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!