frontpage
Flashforge Creator 5 4-Toolheads Multi-Color 3D Printer
$489
$799
38% off
+ Free S&Hat AliExpress
+ Free S&Hat AliExpressDeal Details
Update: This popular deal is available at an even lower price.
FLASHFORGE 3D Printer Store via AliExpress has Flashforge Creator 5 4-Toolheads Multi-Color 3D Printer on sale for $587.26 - $80 when you apply promo code USDEALS80 or JJX80D at checkout = $507.26 -> $516.29 -> now $488.85. Shipping is free.
Thanks to Community Member DealzRGood4U for sharing this deal.
FLASHFORGE 3D Printer Store via AliExpress has Flashforge Creator 5 4-Toolheads Multi-Color 3D Printer on sale for $587.26 - $80 when you apply promo code USDEALS80 or JJX80D at checkout = $507.26 -> $516.29 -> now $488.85. Shipping is free.
Thanks to Community Member DealzRGood4U for sharing this deal.
- Note: Price may vary by account or fluctuate slightly with currency exchange rates. You must be signed into your AliExpress account and have your address added to add items to your cart and place an order. You may have to manually type in the promo code to apply it at checkout. This item ships from a USA warehouse. For expedited customer service, please email [email protected].
- 4 Independent Toolheads For True Multi-Color & Multi-Materia
- Up to 500% Faster Multi-Color Printing
- Zero Purge Waste, Maximum Efficiency
- High-Speed Performance (600 mm/s)
- Fully Automatic Calibration & Leveling
- Flawless Print Quality with Smart Compensation
- Multi-Material Capability in One Print
- Build Volume Of 256 × 256 × 256 mm
Editor's Notes
Written by Wiznaz | Staff- This price is $36.26 Lower than our recent Frontpage Deal.
- At the time of this posting, our research indicates that this is $132.71 lower than the next best comparable online prices starting from $649.
- Rated 4.9 out of 5 stars from customer reviews.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Update: This popular deal is available at an even lower price.
FLASHFORGE 3D Printer Store via AliExpress has Flashforge Creator 5 4-Toolheads Multi-Color 3D Printer on sale for $587.26 - $80 when you apply promo code USDEALS80 or JJX80D at checkout = $507.26 -> $516.29 -> now $488.85. Shipping is free.
Thanks to Community Member DealzRGood4U for sharing this deal.
FLASHFORGE 3D Printer Store via AliExpress has Flashforge Creator 5 4-Toolheads Multi-Color 3D Printer on sale for $587.26 - $80 when you apply promo code USDEALS80 or JJX80D at checkout = $507.26 -> $516.29 -> now $488.85. Shipping is free.
Thanks to Community Member DealzRGood4U for sharing this deal.
- Note: Price may vary by account or fluctuate slightly with currency exchange rates. You must be signed into your AliExpress account and have your address added to add items to your cart and place an order. You may have to manually type in the promo code to apply it at checkout. This item ships from a USA warehouse. For expedited customer service, please email [email protected].
- 4 Independent Toolheads For True Multi-Color & Multi-Materia
- Up to 500% Faster Multi-Color Printing
- Zero Purge Waste, Maximum Efficiency
- High-Speed Performance (600 mm/s)
- Fully Automatic Calibration & Leveling
- Flawless Print Quality with Smart Compensation
- Multi-Material Capability in One Print
- Build Volume Of 256 × 256 × 256 mm
Editor's Notes
Written by Wiznaz | Staff- This price is $36.26 Lower than our recent Frontpage Deal.
- At the time of this posting, our research indicates that this is $132.71 lower than the next best comparable online prices starting from $649.
- Rated 4.9 out of 5 stars from customer reviews.
Community Voting
Deal
Score
+254
Good Deal
Bad Deal
Top Comments
Now, I haven't printed anything on my AD5x as a stock printer in a while, but according to at least one facebook post https://www.facebook.co
Now, switching over to Zmod's Bambufy Wipe Tower Type 1, there would be 690 filament changes. This is a huge difference compared to stock AD5x (tested both on Orca and Flash Studio). Presuming that Bambufy purges the same filament weight, that would be 171.81g total, or 44.077g saved just using Zmod. I went and measured out 10g of purge out of my poop basket, and then counted how many pieces that was; I ended up with 47 purged bits, so that was an average of 0.213g per purge, using the Bambufy Wipe Tower Type 1. 0.213g x 690 = 146.809g, or 69.078g saved over stock. If you go with Wipe Tower Type 2 (aka nopoop), I believe the AD5x will not purge at all, relying on the prime tower instead(?). I could test this but have not yet as of this post, but if it does what it says it does, then it would produce 0 purges similar to the Creator 5 and pro.
Almost 70g of saved filament is no joke for just firmware flash, and 215g of filament saved on purges is an even bigger save if you don't have to. But you also have to keep in mind the price of both the AD5x and the Creator 5. Last I checked, the AD5x was going for about $210 on Ali whereas this one is $507. Over double the price. If you pick up 10kg Kingroon filament on sale, that's what, about $7/kg, or $0.007/g. $0.007/g x 215g = $1.51. I'd have to print that Spiderman almost 200 times once per plate to make up the cost of the Creator 5. I wouldn't specifically get a Creator 5 for those kinds of savings, but that's just my opinion (which is why I picked up the Pro).
Hope this helps.
Community Reviews
FLASHFORGE Creator 5 is a four head tool changer built for fast multicolor and multimaterial printing, with purgeless tool changes and strong print quality. The heated chamber makes it appealing for ABS, PA, and other engineering filaments, and setup has been quick enough to get to first print in about 45 minutes. The main tradeoffs are the higher price, some manual filament handling, and a current firmware setup that still relies on a prime tower, so savings are not total. It also shakes enough that lower acceleration may help on taller prints, making it a strong fit when speed and low waste matter most.
The printer can produce faster multicolor results because tool changes take only a few seconds.
The printer can reduce multicolor waste by using a prime tower approach instead of generating large amounts of "poop."
The printer's four separate heads enable purgeless operation and support multiple filament types within the same print.
The printer can be set up and reach the first print in about forty-five minutes, which helps shorten time to first results.
The deal can be completed successfully when the checkout steps and cart flow accept the order.
Updating or adding an address can trigger sales tax on AliExpress, increasing the total cost by roughly eight percent across items.
Promo codes can fail to apply when checkout conditions are not met, including cases where the item cannot be added to the cart without a shipping address.
The printer requires printing a prime tower for priming, which can reduce expected filament savings.
The printer can shake noticeably, and taller prints may fail when acceleration is not lowered.
Common Questions (5)
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
86 Comments
Sign up for a Slickdeals account to remove this ad.
The sale price just dropped, so some codes might not work.
Try JJX80D, JJX55D, USDEALS55, HDUS50, JJX40D, USDEALS40, or HDUS35 IOT get the final price down to ~$489+.
A text to customer support and the response was the shipper hasn't done a logistics update. And three days later still no update or printer. I'm going to buy a product from a different manufacturer and if this thing ever shows up, I'm just gonna return it.
Sign up for a Slickdeals account to remove this ad.
The sale price just dropped, so some codes might not work.
Try JJX80D, JJX55D, USDEALS55, HDUS50, JJX40D, USDEALS40, or HDUS35 IOT get the final price down to ~$489+.
Tried several things, none of the promo codes would work. Including the ones posted by Pirin a couple messages back
Took me a bit to figure out I couldn't add it to my cart because I had no shipping address entered.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!