frontpage
Flashforge Creator 5 4-Toolheads Multi-Color 3D Printer
$507
$799
36% off
+ Free S&Hat AliExpress
+ Free S&Hat AliExpressDeal Details
FLASHFORGE 3D Printer Store via AliExpress has Flashforge Creator 5 4-Toolheads Multi-Color 3D Printer on sale for $587.26 - $80 promo code USDEALS80 at checkout = $507.26. Shipping is free.
Thanks to Community Member DealzRGood4U for sharing this deal.
Thanks to Community Member DealzRGood4U for sharing this deal.
- Note: Price may vary by account or fluctuate slightly with currency exchange rates. You must be signed into your AliExpress account and have your address added to add items to your cart and place an order. You may have to manually type in the promo code to apply it at checkout. This item ships from a USA warehouse. For expedited customer service, please email [email protected].
- 4 Independent Toolheads For True Multi-Color & Multi-Materia
- Up to 500% Faster Multi-Color Printing
- Zero Purge Waste, Maximum Efficiency
- High-Speed Performance (600 mm/s)
- Fully Automatic Calibration & Leveling
- Flawless Print Quality with Smart Compensation
- Multi-Material Capability in One Print
- Build Volume Of 256 × 256 × 256 mm
Editor's Notes
Written by SaltyOne | Staff- This price is $17.85 Lower than our recent Frontpage Deal.
- At the time of this posting, our research indicates that this is $76.67 lower than the next best comparable online prices starting from $583.93.
- Rated 4.9 out of 5 stars from customer reviews.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
FLASHFORGE 3D Printer Store via AliExpress has Flashforge Creator 5 4-Toolheads Multi-Color 3D Printer on sale for $587.26 - $80 promo code USDEALS80 at checkout = $507.26. Shipping is free.
Thanks to Community Member DealzRGood4U for sharing this deal.
Thanks to Community Member DealzRGood4U for sharing this deal.
- Note: Price may vary by account or fluctuate slightly with currency exchange rates. You must be signed into your AliExpress account and have your address added to add items to your cart and place an order. You may have to manually type in the promo code to apply it at checkout. This item ships from a USA warehouse. For expedited customer service, please email [email protected].
- 4 Independent Toolheads For True Multi-Color & Multi-Materia
- Up to 500% Faster Multi-Color Printing
- Zero Purge Waste, Maximum Efficiency
- High-Speed Performance (600 mm/s)
- Fully Automatic Calibration & Leveling
- Flawless Print Quality with Smart Compensation
- Multi-Material Capability in One Print
- Build Volume Of 256 × 256 × 256 mm
Editor's Notes
Written by SaltyOne | Staff- This price is $17.85 Lower than our recent Frontpage Deal.
- At the time of this posting, our research indicates that this is $76.67 lower than the next best comparable online prices starting from $583.93.
- Rated 4.9 out of 5 stars from customer reviews.
Community Voting
Deal
Score
+161
Good Deal
Bad Deal
Top Comments
Now, I haven't printed anything on my AD5x as a stock printer in a while, but according to at least one facebook post https://www.facebook.co
Now, switching over to Zmod's Bambufy Wipe Tower Type 1, there would be 690 filament changes. This is a huge difference compared to stock AD5x (tested both on Orca and Flash Studio). Presuming that Bambufy purges the same filament weight, that would be 171.81g total, or 44.077g saved just using Zmod. I went and measured out 10g of purge out of my poop basket, and then counted how many pieces that was; I ended up with 47 purged bits, so that was an average of 0.213g per purge, using the Bambufy Wipe Tower Type 1. 0.213g x 690 = 146.809g, or 69.078g saved over stock. If you go with Wipe Tower Type 2 (aka nopoop), I believe the AD5x will not purge at all, relying on the prime tower instead(?). I could test this but have not yet as of this post, but if it does what it says it does, then it would produce 0 purges similar to the Creator 5 and pro.
Almost 70g of saved filament is no joke for just firmware flash, and 215g of filament saved on purges is an even bigger save if you don't have to. But you also have to keep in mind the price of both the AD5x and the Creator 5. Last I checked, the AD5x was going for about $210 on Ali whereas this one is $507. Over double the price. If you pick up 10kg Kingroon filament on sale, that's what, about $7/kg, or $0.007/g. $0.007/g x 215g = $1.51. I'd have to print that Spiderman almost 200 times once per plate to make up the cost of the Creator 5. I wouldn't specifically get a Creator 5 for those kinds of savings, but that's just my opinion (which is why I picked up the Pro).
Hope this helps.
Community Reviews
FLASHFORGE Creator 5 is a four tool multi material printer that stands out for fast multicolor jobs, purgeless tool changes, and the ability to mix filament types in the same print. The larger 256 millimeter bed and separate heads also make it appealing for bigger parts and redundancy if one head needs service. Current firmware is described as slow, and prime towers still add some waste, so the filament savings are not as dramatic as they first seem. Print quality is praised as excellent, making it a strong fit for multicolor and engineering material work.
Common Questions (5)
The Creator 5 uses 4 separate tool heads, so multi-color changes are much faster and avoid filament poop, relying on a prime tower instead. The AD5X uses automatic filament feeding/cutting and is easier to swap nozzles on, but multi-color prints take longer and involve more purge waste.
Yes. Tool changes take about 5 seconds, while filament swaps on the AD5X can take over a minute, so multicolor jobs can finish much faster on the Creator 5. One comparison also estimated roughly a day difference in print time on a large multicolor model.
It avoids purge poop by using tool changes and a prime tower, but it still needs a prime tower for priming. For prints with many color changes, that can save a meaningful amount of waste; for small numbers of changes, the time and waste can be similar to other systems.
Yes, it can handle ABS and other heated-enclosure materials like PA and ASA. It is also being used successfully for multicolor prints, including ABS parts.
Yes. Filament changes are manual, and nozzle access requires removing screws rather than a quick tool-less swap. That makes it less convenient than the AD5X, but it can still be useful for heated-enclosure materials like PA and ASA.
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
52 Comments
Sign up for a Slickdeals account to remove this ad.
Luckily you weren't wasting someone's time on the other end.
Stuff like this is why community members here can be so bitter as well. You literally wasted the time of the other commentors trying to help you.
Bed on this one is larger (220mm for the AD5X vs 256mm for this one)
Speed, sure.
What else?
You were wasting people's time "I've completely screwed myself just trying to get this thing in my cart that I'm not going to buy anyway."
No point in your revisionist history.
Sign up for a Slickdeals account to remove this ad.
That is a huge difference. The Creator 5 and the Creator 5 Pro are different enough to not even ask here. If I'm deciding between the AD5X and C5 ... C5 Pro is too much for me.
You were wasting people's time "I've completely screwed myself just trying to get this thing in my cart that I'm not going to buy anyway."
No point in your revisionist history.
This is a deal site, not a lawyer's office. You're wasting my time as much as he is. Who cares.
Our community has rated this post as helpful. If you agree, why not thank
Our community has rated this post as helpful. If you agree, why not thank
Now, I haven't printed anything on my AD5x as a stock printer in a while, but according to at least one facebook post https://www.facebook.co
Now, switching over to Zmod's Bambufy Wipe Tower Type 1, there would be 690 filament changes. This is a huge difference compared to stock AD5x (tested both on Orca and Flash Studio). Presuming that Bambufy purges the same filament weight, that would be 171.81g total, or 44.077g saved just using Zmod. I went and measured out 10g of purge out of my poop basket, and then counted how many pieces that was; I ended up with 47 purged bits, so that was an average of 0.213g per purge, using the Bambufy Wipe Tower Type 1. 0.213g x 690 = 146.809g, or 69.078g saved over stock. If you go with Wipe Tower Type 2 (aka nopoop), I believe the AD5x will not purge at all, relying on the prime tower instead(?). I could test this but have not yet as of this post, but if it does what it says it does, then it would produce 0 purges similar to the Creator 5 and pro.
Almost 70g of saved filament is no joke for just firmware flash, and 215g of filament saved on purges is an even bigger save if you don't have to. But you also have to keep in mind the price of both the AD5x and the Creator 5. Last I checked, the AD5x was going for about $210 on Ali whereas this one is $507. Over double the price. If you pick up 10kg Kingroon filament on sale, that's what, about $7/kg, or $0.007/g. $0.007/g x 215g = $1.51. I'd have to print that Spiderman almost 200 times once per plate to make up the cost of the Creator 5. I wouldn't specifically get a Creator 5 for those kinds of savings, but that's just my opinion (which is why I picked up the Pro).
Hope this helps.
Sign up for a Slickdeals account to remove this ad.
Now, I haven't printed anything on my AD5x as a stock printer in a while, but according to at least one facebook post https://www.facebook.co
Now, switching over to Zmod's Bambufy Wipe Tower Type 1, there would be 690 filament changes. This is a huge difference compared to stock AD5x (tested both on Orca and Flash Studio). Presuming that Bambufy purges the same filament weight, that would be 171.81g total, or 44.077g saved just using Zmod. I went and measured out 10g of purge out of my poop basket, and then counted how many pieces that was; I ended up with 47 purged bits, so that was an average of 0.213g per purge, using the Bambufy Wipe Tower Type 1. 0.213g x 690 = 146.809g, or 69.078g saved over stock. If you go with Wipe Tower Type 2 (aka nopoop), I believe the AD5x will not purge at all, relying on the prime tower instead(?). I could test this but have not yet as of this post, but if it does what it says it does, then it would produce 0 purges similar to the Creator 5 and pro.
Almost 70g of saved filament is no joke for just firmware flash, and 215g of filament saved on purges is an even bigger save if you don't have to. But you also have to keep in mind the price of both the AD5x and the Creator 5. Last I checked, the AD5x was going for about $210 on Ali whereas this one is $507. Over double the price. If you pick up 10kg Kingroon filament on sale, that's what, about $7/kg, or $0.007/g. $0.007/g x 215g = $1.51. I'd have to print that Spiderman almost 200 times once per plate to make up the cost of the Creator 5. I wouldn't specifically get a Creator 5 for those kinds of savings, but that's just my opinion (which is why I picked up the Pro).
Hope this helps.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!