Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
frontpage
frontpage
hawkblu09 | Staff 15.7K Views
Oct 16, 2026 5:31 PM

1KG 3DHoJor 1.75mm TPU 95A 3D Printer Filament (Black)

$14

$24

41% off
Amazon
Get Deal at Amazon

Why are you downvoting this deal?

Good Deal?
32Comments
Save
Share
Deal Details
This popular Frontpage deal is still available.

3DHoJor via Amazon has 1KG 3DHoJor 1.75mm TPU 95A 3D Printer Filament (Black, HJ-TPU-95A175B1) on sale for $13.99. Shipping is free with Prime or on $35+ orders.

Thanks to Deal Hunter hawkblu09 for sharing this deal.

About this item:
  • Stretchable to 3x original length
  • Durable and wear-resistant with good interlayer adhesion
  • Waterproof construction
  • Smooth extrusion with minimal warping and no clogging
  • Compatible with most FDM 3D printers including Bambu Lab A1 Mini, X1C, P1P, ELEGOO Neptune, Anycubic Kobra, Flsun V400, Creality K1, K1 Max, Ender 7, and Prusa MK4S
  • Vacuum-sealed packaging to keep filament dry and dust-free
  • Material: Thermoplastic Polyurethane (TPU)
  • Shore Hardness: 95A

Editor's Notes

Written by persian_mafia | Staff

Original Post

Written by hawkblu09 | Staff
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
This popular Frontpage deal is still available.

3DHoJor via Amazon has 1KG 3DHoJor 1.75mm TPU 95A 3D Printer Filament (Black, HJ-TPU-95A175B1) on sale for $13.99. Shipping is free with Prime or on $35+ orders.

Thanks to Deal Hunter hawkblu09 for sharing this deal.

About this item:
  • Stretchable to 3x original length
  • Durable and wear-resistant with good interlayer adhesion
  • Waterproof construction
  • Smooth extrusion with minimal warping and no clogging
  • Compatible with most FDM 3D printers including Bambu Lab A1 Mini, X1C, P1P, ELEGOO Neptune, Anycubic Kobra, Flsun V400, Creality K1, K1 Max, Ender 7, and Prusa MK4S
  • Vacuum-sealed packaging to keep filament dry and dust-free
  • Material: Thermoplastic Polyurethane (TPU)
  • Shore Hardness: 95A

Editor's Notes

Written by persian_mafia | Staff

Original Post

Written by hawkblu09 | Staff

Community Voting

Deal Score
+133
Good Deal
Bad Deal

Why are you downvoting this deal?

Get Deal at Amazon

Top Comments

MikePD
243Comments
41Reputation
TPU is tricker to print with. Profiles tend to have it print slower than most other filaments, you can't use a 0.2mm nozzle, expect lots of stringing, etc. With that said, it has been an amazingly durable filament. Layer adhesion is great and it's a solid option for outdoor/tougher applications. I've been printing custom boat bumpers for my dock and they've held up for the 2-3 summers I've used them. Not familiar with this brand but at this price I'm willing to give it a shot. In for one!
Go to Comment
IShouldBuyIndxFunds
479Comments
110Reputation
TPU deals are rare - I don't use it often but when I do the parts are pretty simple. Like gaskets, spacers etc. So print quality is often good enough. TPU is very moisture sensitive. Very long dry times too.

Tried printing a phone case one time and... id just rather buy one.
Go to Comment

Community Reviews

This 95A TPU stands out as a flexible, durable filament for practical parts like gaskets, bumpers, wrist rests, feet, and other tough prints. It is described as more like flexible plastic than rubber, with very strong layer adhesion and good results on printers such as the Bambu A1, Flashforge AD5M and AD5X, and Elegoo Centauri Carbon. The main cautions are TPU specific, it prints slowly, strings easily, and needs drying and careful bed setup. Textured PEI or glue helps release, and direct feeding works better than AMS style routing.

Common Questions (5)

  • 95A TPU is slower and fussier than PLA, with stringing and drying needs, but it can print well on printers like the Bambu A1, AD5M/AD5X, and Elegoo Centauri Carbon when fed directly. A few users had trouble on the Flashforge Adventurer 5M, so printer setup and profile tuning matter.

    MikePDLavenderField2312quixtoxicatedChonkla

  • 95A is flexible, but it still feels more like flexible plastic than soft rubber. It has very good layer adhesion and is suited to durable parts like gaskets, spacers, wrist rests, vibration feet, bumpers, and other tough outdoor uses.

    MikePDIShouldBuyIndxFundsChonklaTenseFeather3818

  • Yes. TPU is moisture sensitive, and drying it right out of the vacuum bag can improve results and reduce stringing. Longer dry times are often needed, especially if the spool has absorbed moisture.

    IShouldBuyIndxFundsAshtonRoyalChonkla

  • Textured PEI or a cool textured plate works well, and glue stick can help with release. Avoid cold or supertack-style plates, because TPU can bond so strongly that removal becomes difficult.

    ChonklaAshtonRoyalFabulousHamster606

  • It should be fed directly rather than through AMS. TPU intended for AMS is much stiffer, while 95A is still flexible enough that direct feeding is the easier and more reliable setup.

    TenseFeather3818Mr_Skull

AI-generated summary based on comments from the community. Updated ago

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

32 Comments

Sign up for a Slickdeals account to remove this ad.

Oct 17, 2026 4:57 PM
568 Comments
Joined Mar 2013
cinematic6436Oct 17, 2026 4:57 PM
568 Comments
Quote from IShouldBuyIndxFunds View quoted comment :
TPU deals are rare - I don't use it often but when I do the parts are pretty simple. Like gaskets, spacers etc. So print quality is often good enough. TPU is very moisture sensitive. Very long dry times too. Tried printing a phone case one time and... id just rather buy one.
What went wrong? I got some TPU off Amazon, printed a case in maybe 12 hours & didn't really have any problems.
Oct 17, 2026 6:05 PM
87 Comments
Joined Jan 2020
FabulousHamster606Oct 17, 2026 6:05 PM
87 Comments
Quote from dogtagz12 View quoted comment :
Which profile did you use on the ad5x and did you use the textured plate or something else?
I used a generic profile that's in the flashforge slicer. Cool textured plate or textured PEI plate, either works. No glue.
Oct 17, 2026 6:08 PM
1.5K Comments
Joined Mar 2012
dogtagz12Oct 17, 2026 6:08 PM
1.5K Comments
Quote from FabulousHamster606 View quoted comment :
I used a generic profile that's in the flashforge slicer. Cool textured plate or textured PEI plate, either works. No glue.
Thank you. 0.4 nozzle too?
Oct 17, 2026 9:10 PM
297 Comments
Joined Apr 2015
_T3ch_Oct 17, 2026 9:10 PM
297 Comments
Worth a shot at this price. Have never printed TPU before, but will give it a try with my P2S.
Oct 17, 2026 10:06 PM
888 Comments
Joined Apr 2008
c3688tOct 17, 2026 10:06 PM
888 Comments
I've only printed a bit of the bambu labs TPU and I think it's way too stiff. It was TPU for AMS, maybe that's why. I'm sure that's so it can feed the stuff easier. Is this softer by chance (hopefully) and without feed challenges?
Last edited by c3688t October 17, 2026 at 03:18 PM.
Oct 18, 2026 1:27 AM
231 Comments
Joined Nov 2010
Mr_SkullOct 18, 2026 1:27 AM
231 Comments
The first TPU I tried on my P1S was some super soft stuff that didn't really engage or feed well on the stock extrusion feeder gear settings. Later learned people were tightening the feeder up and printing an overhead filament holder. I'll give this a try since I lost a fight to the cheap and soft 85A stuff.
Oct 18, 2026 1:30 AM
42 Comments
Joined Nov 2022
TenseFeather3818Oct 18, 2026 1:30 AM
42 Comments
Quote from c3688t View quoted comment :
I've only printed a bit of the bambu labs TPU and I think it's way too stiff. It was TPU for AMS, maybe that's why. I'm sure that's so it can feed the stuff easier. Is this softer by chance (hopefully) and without feed challenges?
TPU for AMS seems to be 68D which is very very stiff. This one here at 95A should be noticeably more flexible.But 95A is still pretty hard and won't feel very rubbery, more like flexible plastic. It will stretch a bit and bend well. Plus layer adhesion is extremely good.Should be easy to print with any printer as long as you bypass the AMS and feed it directly
1

Sign up for a Slickdeals account to remove this ad.

Oct 18, 2026 7:50 PM
3.8K Comments
Joined Oct 2006
XamindarOct 18, 2026 7:50 PM
3.8K Comments
Quote from Chonkla View quoted comment :
This brand works well on an Elegoo Centauri Carbon with Canvas bypassed (get the file from Elegoo https://wiki.elegoo.com/centauri-...-print-tpu).I agree with others that TPU is a bit of a pain but is a great filament. Very durable. My most recent thing I printed was a wrist rest for my mouse and some squishies for my kid and friends.EDIT> DO NOT use a cold or supertack type of plate - you will never get your print off. Use glue on your plate for easier removal and like others have said, dry first (although I have gotten away without drying you do get better results). Overall I find it pretty easy to print with other than the stringing and fine tuning hardness.
You don't need any glue. Just pour some iso alcohol on the plate and it comes right off.
Oct 18, 2026 8:47 PM
2 Comments
Joined Dec 2021
LavenderField2312Oct 18, 2026 8:47 PM
2 Comments
Quote from thawynd View quoted comment :
What kind of stuff do you print with it?
A bunch of random things, head bands for my Hifiman head phones, a small home plate for batting practice with my son, inserts for a vice, vibration isolation feet, tried a cell phone case but doesn't look as nice as store bought.
Yesterday 1:20 AM
668 Comments
Joined Jun 2017
ThePublisherYesterday 1:20 AM
668 Comments
Quote from bubblegoose View quoted comment :
Not sure on this deal, but I had a hard time with TPU 95A on my Flashforge Adventurer 5M, I got some 64D and that printed well.
I have the same printer! Really like it after about 200 hours, especially for the price.
Yesterday 11:26 AM
578 Comments
Joined Jun 2008
nightsharkYesterday 11:26 AM
578 Comments
Quote from Chonkla View quoted comment :
This brand works well on an Elegoo Centauri Carbon with Canvas bypassed (get the file from Elegoo https://wiki.elegoo.com/centauri-...-print-tpu).I agree with others that TPU is a bit of a pain but is a great filament. Very durable. My most recent thing I printed was a wrist rest for my mouse and some squishies for my kid and friends.EDIT> DO NOT use a cold or supertack type of plate - you will never get your print off. Use glue on your plate for easier removal and like others have said, dry first (although I have gotten away without drying you do get better results). Overall I find it pretty easy to print with other than the stringing and fine tuning hardness.
What are a few of the squishy models you have tried?
Yesterday 1:38 PM
9 Comments
Joined Feb 2026
OliveOctopus3119Yesterday 1:38 PM
9 Comments
Sweet deal. I'll have to pick some up.
Yesterday 2:40 PM
646 Comments
Joined Apr 2024
NgreedslopiaGPUYesterday 2:40 PM
646 Comments
How are you guys feeding TPU to your printer. I have high humidity so I keep PETG/PLA in cereal DIY desiccant dry boxes but TPU seems difficult to feed from PTFE tube?
Yesterday 5:31 PM
87 Comments
Joined Jan 2020
FabulousHamster606Yesterday 5:31 PM
87 Comments
Quote from dogtagz12 View quoted comment :
Thank you. 0.4 nozzle too?
Yes, I only ever tried the 0.4 nozzle.

Sign up for a Slickdeals account to remove this ad.

Yesterday 7:22 PM
26 Comments
Joined May 2012
partychickmnYesterday 7:22 PM
26 Comments
Quote from _T3ch_ View quoted comment :
Worth a shot at this price. Have never printed TPU before, but will give it a try with my P2S.
Please come back and report how it went. I'm having a hard time swallowing $40 for the TPU for AMS and I'd like to print some things with my P2S 🤞🏼

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

Related Searches

ComputersPrinters3D PrintersAmazon