Browse every Black Friday offer we could findBrowse every Black Friday offer we could find

View The Sift
Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
frontpage
frontpage
persian_mafia | Staff 3.6K Views
Yesterday 3:31 PM

Creality SPARKX i7 Multi-Color 3D Printer Color Combo

$319

$399

20% off
+ Free S&Hat B&H Photo Video
Get Deal at B&H Photo Video

Why are you downvoting this deal?

Good Deal?
12Comments
Save
Share
Deal Details
B&H Photo Video has Creality SPARKX i7 Multi-Color 3D Printer Color Combo for $349 - $30 discount auto-applied in cart = $319. Shipping is free.

Thanks to Deal Editor persian_mafia for finding this deal.

Includes:
  • Creality SPARKX i7 Multi-Color 3D Printer Color Combo
  • Power cable
  • CFS Lite
  • CFS 6-Pin Cable (3.3')
  • Scraper
  • Hex Wrench (H2 & H2.5)
  • Spool Holder
  • i7 PTFE Tube
  • CFS Lite PTFE Tube Kit
  • CFS Lite Desiccant
  • Filament Sample (32.8')
  • Limited 12-Month Manufacturer Warranty
Features:
  • FFF Printing Technology
  • 10.2 x 10.2 x 10" Build Volume
  • Direct Drive Extruder
  • 1.75mm Filament Support
  • Print via USB Flash Drive & Wi-Fi
  • Aluminum Alloy Design
  • Up to Four Filaments Supported
  • Includes CFS Lite Attachment

Editor's Notes

Written by powerfuldoppler | Staff
  • About this deal:
    • Our research indicates that this offer is $30 lower than the next best available price from a reputable merchant with prices starting from $349

Original Post

Written by persian_mafia | Staff
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
B&H Photo Video has Creality SPARKX i7 Multi-Color 3D Printer Color Combo for $349 - $30 discount auto-applied in cart = $319. Shipping is free.

Thanks to Deal Editor persian_mafia for finding this deal.

Includes:
  • Creality SPARKX i7 Multi-Color 3D Printer Color Combo
  • Power cable
  • CFS Lite
  • CFS 6-Pin Cable (3.3')
  • Scraper
  • Hex Wrench (H2 & H2.5)
  • Spool Holder
  • i7 PTFE Tube
  • CFS Lite PTFE Tube Kit
  • CFS Lite Desiccant
  • Filament Sample (32.8')
  • Limited 12-Month Manufacturer Warranty
Features:
  • FFF Printing Technology
  • 10.2 x 10.2 x 10" Build Volume
  • Direct Drive Extruder
  • 1.75mm Filament Support
  • Print via USB Flash Drive & Wi-Fi
  • Aluminum Alloy Design
  • Up to Four Filaments Supported
  • Includes CFS Lite Attachment

Editor's Notes

Written by powerfuldoppler | Staff
  • About this deal:
    • Our research indicates that this offer is $30 lower than the next best available price from a reputable merchant with prices starting from $349

Original Post

Written by persian_mafia | Staff

Community Voting

Deal Score
+25
Good Deal
Bad Deal

Why are you downvoting this deal?

Get Deal at B&H Photo Video

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

12 Comments

Sign up for a Slickdeals account to remove this ad.

Yesterday 6:35 PM
34 Comments
Joined Sep 2014
jhs11Yesterday 6:35 PM
34 Comments
Any reason to get this over the new i8 which is multicolor without a cfs? And cheaper?

I suppose the i8 is still new and just starting the production phase. You can still back it on indiegogo. Their goal is to have everything shipped by end of Nov.
Yesterday 9:52 PM
84 Comments
Joined Apr 2016
gekkoheartYesterday 9:52 PM
84 Comments
Quote from jhs11 View quoted comment :
Any reason to get this over the new i8 which is multicolor without a cfs? And cheaper? I suppose the i8 is still new and just starting the production phase. You can still back it on indiegogo. Their goal is to have everything shipped by end of Nov.
You should get the i8 if you plan to do multicolor. The i7 is a great printer but the waste it creates for multicolor is ridiculous. And that goes for any printer that supports multiple colors and doesn't have multiple tool heads or a special nozzle (such as the i8). The only benefit of this over the i8 is the CFS which handles automatic load and unload of the filaments, but you can buy that separately.
Today 1:44 AM
43 Comments
Joined Oct 2018
mytime007Today 1:44 AM
43 Comments
I7 my first printer (3 months), like it so much, i am backer 3,000 for the I8 hope they start shipping soon
3 months and had 0 problems with the I7
Pro
Today 4:16 AM
3.4K Comments
Joined Dec 2012
pmperry
Pro
Today 4:16 AM
3.4K Comments
Quote from jhs11 View quoted comment :
Any reason to get this over the new i8 which is multicolor without a cfs? And cheaper?

I suppose the i8 is still new and just starting the production phase. You can still back it on indiegogo. Their goal is to have everything shipped by end of Nov.
Except for the fact that shipping was set for October and I haven't received a notice that the i8 shipped at all.
Today 6:33 AM
43 Comments
Joined Oct 2018
mytime007Today 6:33 AM
43 Comments
yeah, no notice on shipping. I would like some info, do not like being left in the dark. Was suppose to be, starting in October, well we have 1 day left. They could at least put out an update, or mention it on one of the live streams.
Today 7:35 AM
34 Comments
Joined Sep 2014
jhs11Today 7:35 AM
34 Comments
Quote from mytime007 View quoted comment :
yeah, no notice on shipping. I would like some info, do not like being left in the dark. Was suppose to be, starting in October, well we have 1 day left. They could at least put out an update, or mention it on one of the live streams.
I think they posted an update recently:

https://www.indiegogo.com/en/proj.../updates/4

TL;DR they say the first few thousand have left the factory. "Shipping" though is literally shipping on a ship to the destination countries - which will...take time. They say expected delivery to folks would be end of December. Kinda hand wavy estimates though.
Today 12:44 PM
38 Comments
Joined Nov 2018
Mr_GraviaToday 12:44 PM
38 Comments
I have a pledge for the I8, will probably sell my Elegoo CC1 + canvas. Single tool head multicolor prints create a lot of waste and are really best for when you have as few color changes as possible for the print or you want to use the AMS for continuous prints where you may run out of a color and having it automatically switch to another roll is useful.

Sign up for a Slickdeals account to remove this ad.

Today 1:09 PM
176 Comments
Joined Mar 2014
Stagnation1Today 1:09 PM
176 Comments
Quote from gekkoheart View quoted comment :
You should get the i8 if you plan to do multicolor. The i7 is a great printer but the waste it creates for multicolor is ridiculous. And that goes for any printer that supports multiple colors and doesn't have multiple tool heads or a special nozzle (such as the i8). The only benefit of this over the i8 is the CFS which handles automatic load and unload of the filaments, but you can buy that separately.
I8 only supports PLA and PETG which is quite a limitation. The I7 at least supports TPU.

Plus, they recommend not using PLA and PETG at the same so you can't even really use it for easy support removal:

"All four filament channels share a single heating assembly. For this reason, we do not recommend using materials with significantly different printing temperatures at the same time.
For best results, all four channels can be loaded with PLA, or all four channels can be loaded with PETG."
Last edited by Stagnation1 October 30, 2026 at 06:15 AM.
Today 2:22 PM
1.6K Comments
Joined Nov 2017
anthony32376Today 2:22 PM
1.6K Comments
Quote from gekkoheart View quoted comment :
You should get the i8 if you plan to do multicolor. The i7 is a great printer but the waste it creates for multicolor is ridiculous. And that goes for any printer that supports multiple colors and doesn't have multiple tool heads or a special nozzle (such as the i8). The only benefit of this over the i8 is the CFS which handles automatic load and unload of the filaments, but you can buy that separately.
The i8 design is great but I am going to wait.
I saw a teardown and the tool head has all plastic gears and parts inside.
Maybe that will change for the production units who knows.
But this is already harkining back to the ender 3 days of having to upgrade the extruder to an all metal one, calibration or steps wow fun times.
I wonder if micro swiss is still in business they would probably make an all metal kit for the i8 if they are.
I will wait for a machine with two if these quar tek style heads though preferably a core XY and metal gears
Today 2:42 PM
185 Comments
Joined Oct 2026
BraveTest551Today 2:42 PM
185 Comments
Purge waste is still there whenever colors change; the 50% figure is measured against other multicolor systems, not against single-color printing.
Today 4:35 PM
96 Comments
Joined Oct 2022
SharpSquirrel178Today 4:35 PM
96 Comments
Does anyone have information on the Creality Cloud? I saw that on the indiegogo and wonder if there's any locked down features or functionality tied to needing an account or a subscription.
Today 4:43 PM
2.5K Comments
Joined Dec 2010
helicopter2Today 4:43 PM
2.5K Comments
Yah, creality is so well known for quality printers and filament (NOT)

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

Related Searches

ComputersPrinters3D PrintersFree ShippingCrealityB&H Photo Video