Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.

Browse every Black Friday offer we could findBrowse every Black Friday offer we could find

View The Sift
frontpage
frontpage
LovelyPocket895 12.3K Views
Yesterday 6:31 AM

Bambu Lab P2S AMS Combo 3D Printer (Gray)

$650

$750

13% off
+ Free S&Hat Best Buy
Get Deal at Best Buy

Why are you downvoting this deal?

Good Deal?
33Comments
Save
Share
Deal Details
Best Buy has Bambu Lab P2S AMS Combo 3D Printer (P2S AMS Combo) on sale for $649.99. Shipping is free.

B&H Photo Video has Bambu Lab P2S AMS Combo 3D Printer (P2S AMS Combo) on sale for $649.99. Shipping is free.

Thanks to community member LovelyPocket895 for finding this deal.

Features:
  • 256*256*256 mm³ print volume
  • Single-nozzle, multi-color 3D printing
  • Closed-loop Servo motor extruder
  • 5-inch touchscreen with refreshed UI
  • Cold-air intake parts cooling
  • AI print error detection

Editor's Notes

Written by megakimcheelove | Staff
  • Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.

Original Post

Written by LovelyPocket895
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Best Buy has Bambu Lab P2S AMS Combo 3D Printer (P2S AMS Combo) on sale for $649.99. Shipping is free.

B&H Photo Video has Bambu Lab P2S AMS Combo 3D Printer (P2S AMS Combo) on sale for $649.99. Shipping is free.

Thanks to community member LovelyPocket895 for finding this deal.

Features:
  • 256*256*256 mm³ print volume
  • Single-nozzle, multi-color 3D printing
  • Closed-loop Servo motor extruder
  • 5-inch touchscreen with refreshed UI
  • Cold-air intake parts cooling
  • AI print error detection

Editor's Notes

Written by megakimcheelove | Staff
  • Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.

Original Post

Written by LovelyPocket895

Community Voting

Deal Score
+36
Good Deal
Bad Deal

Why are you downvoting this deal?

Get Deal at Best Buy

Top Comments

MyDogSassy
720Comments
131Reputation
No more filament waste, and way faster printing. Right now if you want to print multicolor, the printer has to extruder all the old color filament and then load a new color. I have seen simple 1 hr prints that are 1 color become 10 hours when you print multi color.
Go to Comment
Pirate00
14Comments
10Reputation
Same price as the Bambu website. It's a sale, not sure it's a deal.
Go to Comment
TokenSid
1.4KComments
196Reputation
Overpriced now that mutlitool nozzles are hitting the market. Needs to be $500 if the U1 is $699.
Go to Comment

Community Reviews

The P2S AMS 2 Pro combo is a solid workhorse 3D printer for PLA and PETG, with multicolor printing that cuts manual color swapping and can save filament. It is praised for Bambu Lab's easy software and reliable everyday printing, and the AMS adds convenient multicolor support. The main tradeoff is that multicolor jobs can run much longer, especially when there are frequent color changes. It fits best if you want a dependable printer now rather than waiting for pricier newer models.

  • Hobbyists printing PLA or PETG parts, because it is a solid workhorse that produces decent prints with common materials.

    vypurrthe.barbrRagate

  • New 3D printing beginners who want an enclosed, easy-to-manage machine, because it is described as a workhorse with straightforward software and monitoring.

    vypurrRCMIKESplendidCrayon2019

  • Makers who want occasional multicolor prints, because the AMS cuts filament waste and avoids the long purge times of manual color changes.

    MyDogSassythe.barbrR

  • People planning frequent multicolor or multi-material production, because tool-changer printers handle those jobs better and this setup becomes slow with repeated color changes.

    vypurrMyDogSassythe.barbrR

  • Makers who need stronger filaments like ABS and other high-temperature materials, because an enclosed heated printer is the better fit for those materials.

    RCMIKESplendidCrayon2019

  • Shoppers expecting a major price drop soon, because newer models are likely to keep this class of printer from falling much further in the near term.

    BSoaresmattyd2377

Common Questions (4)

AI-generated summary based on comments from the community. Updated ago

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

33 Comments

Sign up for a Slickdeals account to remove this ad.

Yesterday 10:31 PM
1.5K Comments
Joined Apr 2006
jesterfxYesterday 10:31 PM
1.5K Comments
Quote from RockHardRockCrawler View quoted comment :
Waiting for the P3C.
I just got my H3C and I'm also excited to see what the P3C will bring... Was planning on getting in on the infimech mx pro Kickstarter but just too many issues for me so probably going to get a P3C as my backup instead 🤣. Who cares about credit card debt anyway?!
2
Yesterday 10:33 PM
1.5K Comments
Joined Apr 2006
jesterfxYesterday 10:33 PM
1.5K Comments
Quote from omeriko View quoted comment :
Been waiting for the sale since summer, but now I have analysis paralysis - this, wait for P3C or get the Snapmaker U1.
You know the snapmaker U2 has to be right around the corner at this point too 🤣. I'm honestly really curious what their follow-up will be.
Yesterday 10:57 PM
501 Comments
Joined Apr 2007
vypurrYesterday 10:57 PM
501 Comments
Quote from mattyd2377 View quoted comment :
Here's the thing. I'm getting into 3D and my thought process is this, if this is a dinosaur in 3 years because tech has just gotten better, why not wait for a better unit? Every new model will push older and other models cheaper. So, I could get this for $650, the next best printer for slightly more, or just wait for this to drop under $600. Seems like it wouldn't be long to wait. Also, what if I really get into the hobby and end up wanting multicolor? The tech being the norm seems right around the corner.
The good news is that once your hooked, you'll find reasons to justify having 2 printers! This would be amazing for engineering needs, functional prints, and prototyping. Your next printer will likely be a tool changer, and you'll be buying the 2nd or 3rd generation of that technology.
Yesterday 11:46 PM
2.6K Comments
Joined Dec 2008
the.barbrRYesterday 11:46 PM
2.6K Comments
Quote from mattyd2377 View quoted comment :
Here's the thing. I'm getting into 3D and my thought process is this, if this is a dinosaur in 3 years because tech has just gotten better, why not wait for a better unit? Every new model will push older and other models cheaper. So, I could get this for $650, the next best printer for slightly more, or just wait for this to drop under $600. Seems like it wouldn't be long to wait. Also, what if I really get into the hobby and end up wanting multicolor? The tech being the norm seems right around the corner.
If you really get into the hobby, you will realize that you need a tried and true workhorse and that you only need a multinozzle printer about 5% of the time. Most multicolor prints have single color layers or are split into single color pieces. I have run about 8,000 hours on a p1s and p2s and have only really wished I had a multinozzle printer when I printed a spiderman headphone stand that took 50 hours. They only print faster if you have multiple color changes per layer. Aside from that they print the same.

So unless you have designed something that is multicolored that you know is going to sell like hotcakes, p2s or similar is where its at for pla, petg and similar filaments.

The only printer I wish I would have gotten is the x2d with a dual nozzle for seperate support media.
Today 12:14 AM
344 Comments
Joined Nov 2014
agateToday 12:14 AM
344 Comments
I have P2S for 7 months. Think it as something that can do decent print with common materials, and do multicolor if you absolutely need it. I recently got a U1, for multicolor printing there is no comparison
1
Pro
Today 12:34 AM
743 Comments
Joined Feb 2018
Nu23
Pro
Today 12:34 AM
743 Comments
Quote from jesterfx View quoted comment :
You know the snapmaker U2 has to be right around the corner at this point too 🤣. I'm honestly really curious what their follow-up will be.
It is 100% coming soon, In their V2 firmware they added support for new hardware and MCU, and that new hardware is beefy. so my guess is thats for U2 or U1L or something
Pro
Today 12:41 AM
743 Comments
Joined Feb 2018
Nu23
Pro
Today 12:41 AM
743 Comments
Quote from jesterfx View quoted comment :
I just got my H3C and I'm also excited to see what the P3C will bring... Was planning on getting in on the infimech mx pro Kickstarter but just too many issues for me so probably going to get a P3C as my backup instead 🤣. Who cares about credit card debt anyway?!
You are talking to backer number 6 here... lol. just backed it this morning
Only thing i am excited about MX pro is that it will let create mods and extended firmware. Which i will never get in Bambu. Who wants printing when you can simply mod your printer. lol
Also did you really jump from Mx to H3C, one is $500 machine other is $2500, they are not even in same country.

Sign up for a Slickdeals account to remove this ad.

Today 1:17 AM
342 Comments
Joined Dec 2008
FChickenToday 1:17 AM
342 Comments
I am so glad I never got into 3d printers
Today 1:27 AM
566 Comments
Joined Jun 2009
mightToday 1:27 AM
566 Comments
3d printers are still a thing?
Today 1:30 AM
829 Comments
Joined Nov 2016
RCMIKEToday 1:30 AM
829 Comments
I picked up an X2D Combo last week for $565. Seller on eBay was taking offers, and another poster here also got a $565 offer accepted.

I'm a 3D printing newbie. Been watching for years. I needed something that could do more than just PLA—ABS and other stronger filaments. The X2D does a nice job with those. Means I can make more than desk toys and figurines. Having a heated enclosure makes a difference, along with the drying capabilities of the AMS2.

It's also nice to have an enclosed system. Dust, pets, etc won't be an issue. I like the air filtration, too. I've got enough microplastics in my body already.

What I didn't really expect was how good Bambu Lab's integration and software is. It's pretty great to keep the printer in my basement workshop while being able to watch a print on my phone. So far I've used my phone, tablet, and desktop to start and monitor prints. That's a really nice feature. The makerworld site is really good, too.

There's no one universal answer as to what the best printer/ecosystem is. Think about your use cases, budget, and what features will make your experience the experience you want to have.
1
Today 1:47 AM
112 Comments
Joined Dec 2017
importcfToday 1:47 AM
112 Comments
Quote from mattyd2377 View quoted comment :
Here's the thing. I'm getting into 3D and my thought process is this, if this is a dinosaur in 3 years because tech has just gotten better, why not wait for a better unit? Every new model will push older and other models cheaper. So, I could get this for $650, the next best printer for slightly more, or just wait for this to drop under $600. Seems like it wouldn't be long to wait. Also, what if I really get into the hobby and end up wanting multicolor? The tech being the norm seems right around the corner.
Just wait forever, you won't have to spend any money. This printer is great. I paid much more for mine. Those comparing it to a h3c at $2500 are silly.
Last edited by importcf November 10, 2026 at 06:51 PM.
1
Today 2:48 AM
160 Comments
Joined Nov 2019
SplendidCrayon2019Today 2:48 AM
160 Comments
Quote from MyDogSassy View quoted comment :
No more filament waste, and way faster printing. Right now if you want to print multicolor, the printer has to extruder all the old color filament and then load a new color. I have seen simple 1 hr prints that are 1 color become 10 hours when you print multi color.
Yeah, but you have to also think of the enclosure to maintain proper temperature. Some of them you have to buy an extra cover on top which is an additional $150 or so (also includes filter) to help with VOCs and maintain temperature. Also, some of the cheaper multicolor ones have the filament expose instead of enclosed (where humidity is necessary). Bambu Lab tends to be easier to use and more of a workhorse. Yeah cheaper in terms of price would be better and they will drop soon I think too. I think the better bargain than the P2S is the X2D. That provides you at least 2 heads so if doing 2 colors it is less waste. But most people don't use multicolor like that also.
Today 2:56 AM
160 Comments
Joined Nov 2019
SplendidCrayon2019Today 2:56 AM
160 Comments
Quote from Pirate00 View quoted comment :
Same price as the Bambu website. It's a sale, not sure it's a deal.
Yeah but if you buy from Bambu Lab and sign up you can get $10 off in addition to the cheaper price. Also if you sign up at the Bambu Lab US Store online-> Black Friday Deals there also giving up to 2000 in credit that can be use to buy various coupons with different discounts, or you can convert the credit into money which for every 100 credit you can get $1 off.
Last edited by Gosh November 10, 2026 at 08:12 PM.
Today 2:59 AM
160 Comments
Joined Nov 2019
SplendidCrayon2019Today 2:59 AM
160 Comments
If you order from bambu lab website you can get $10 off. Also if you sign up at the Bambu Lab US Store online-> Black Friday Deals there also giving up to 2000 in credit that can be use to buy various coupons with different discounts, or you can convert the credit into money which for every 100 credit you can get $1 off.
Last edited by SplendidCrayon2019 November 10, 2026 at 08:34 PM.

Sign up for a Slickdeals account to remove this ad.

Today 3:36 AM
47 Comments
Joined Jan 2025
theheaviestrockToday 3:36 AM
47 Comments
Somewhere a one hour single color print just read the multicolor math above and started packing for a 10 hour stay.

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

Related Searches

ComputersPrinters3D PrintersBest Buy