This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
I wonder if we're going to see an increase in electrical house fire with how much simpler and less intimidating things like this are becoming for your typical homeowner.
I wonder if we're going to see an increase in electrical house fire with how much simpler and less intimidating things like this are becoming for your typical homeowner.
On the contrary. Just because it's easy doesn't mean it's unsafe.
On the contrary. Just because it's easy doesn't mean it's unsafe.
The device itself, sure. What I'm alluding to is the barrier to entry for homeowners who might feel overconfident for their skills and know how when it comes to electrical work.
The device itself, sure. What I'm alluding to is the barrier to entry for homeowners who might feel overconfident for their skills and know how when it comes to electrical work.
Nah your average home owner these days is beyond cluless they wont even try theyve been born and bread to be a consumer and think house electric is like wiring a data center or spacex. Its not complicated most house electric is stupid easy ive used these and they are quick and presumably reliable like wago not like back stabbed outlets which are all good and dandy until years down the road someone decides to run a high amp space heater or non inverter ac. Twisting is hit and miss maybe better today but ill bet theres rarely a house built in last 50 years without at least some questionable ties.
Nah your average home owner these days is beyond cluless they wont even try theyve been born and bread to be a consumer and think house electric is like wiring a data center or spacex. Its not complicated most house electric is stupid easy ive used these and they are quick and presumably reliable like wago not like back stabbed outlets which are all good and dandy until years down the road someone decides to run a high amp space heater or non inverter ac. Twisting is hit and miss maybe better today but ill bet theres rarely a house built in last 50 years without at least some questionable ties.
As a tradesman, I can tell you that homeowners do all sorts of things beyond what they should.
The device itself, sure. What I'm alluding to is the barrier to entry for homeowners who might feel overconfident for their skills and know how when it comes to electrical work.
In my experience these are unsafe. I put in give or take 10 of them and pulled them all out after 2 melted a month or so apart.
Could have been a bad batch; but I've never in hundreds of outlets had another fail.
Also, the wires were really difficult to remove from the levers.
I recommend using the type with the screw connections with the plate to clamp on the wire. It would take maybe an extra 20s to install and will be worry free.
These are a solution for a problem that doesn't exist (ask your favorite neighborhood electrician what they use).
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
I wonder if we're going to see an increase in electrical house fire with how much simpler and less intimidating things like this are becoming for your typical homeowner.
I used these with my two teenage boys to rewire my entire house, because of the horrors I found behind just a couple of outles Like every terminal being used for passthrough, including backstabbed. Cracked housings, etc.
Fun story, when I first moved into the house, 1/2 the house's outlets and lights went out. In thought it was something that I did, as I changed outlets and switches on a different floor/circuit. After hours of trouble shooting with an actual electrician, we found a single nail/screw had shorted a terminal. I had a lot of construction done before moving in, theory was, it was probably there the whole time, just got logged in during vibration.
These outlets would've prevented that scenario.
Like
Helpful
Funny
Not helpful
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
8 Comments
Sign up for a Slickdeals account to remove this ad.
Could have been a bad batch; but I've never in hundreds of outlets had another fail.
Also, the wires were really difficult to remove from the levers.
I recommend using the type with the screw connections with the plate to clamp on the wire. It would take maybe an extra 20s to install and will be worry free.
These are a solution for a problem that doesn't exist (ask your favorite neighborhood electrician what they use).
Sign up for a Slickdeals account to remove this ad.
Fun story, when I first moved into the house, 1/2 the house's outlets and lights went out. In thought it was something that I did, as I changed outlets and switches on a different floor/circuit. After hours of trouble shooting with an actual electrician, we found a single nail/screw had shorted a terminal. I had a lot of construction done before moving in, theory was, it was probably there the whole time, just got logged in during vibration.
These outlets would've prevented that scenario.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!