Did this coupon
work for you?
work for you?
Frontpage
12" Ophanie 5-Setting High Pressure Rain Shower Head w/ Hand Shower & 70" Hose
$44
$89.99
+ Free Shipping
BX Products via Walmart has 12" Ophanie 5-Setting High Pressure Rain Shower Head w/ Hand Shower & 70" Hose (Chrome & Black) on sale for $43.99. Shipping is free.
Thanks to Community Member raisinbagel for sharing this deal.
Includes:
Thanks to Community Member raisinbagel for sharing this deal.
Includes:
- 1x 12" Shower Head
- 1x Brass T-Valve
- 1x Extension Arm
- 1x Handheld Attachment
- 1x Wall Bracket
- 1x 70" Hose
- 1x Install Manual
- 1x Tool Kit w/ Washers, Flow Restrictor and Teflon Tape
- Shower head offers 5 spray modes
- Power Massage
- Rain + Massage
- Rain
- Rain + Mist
- Mist
- 12" Rainfall shower panel can cover your whole body with high pressure water
- 180° adjustable extension arm, height can be adjusted
- Anti-clogging nozzles
- 3 handheld spray modes
Editor's Notes & Price Research
Written by
- About this Store:
- Most items sold & shipped by Walmart.com can be returned for free, either to a store or by mail up to 90 Days after item is delivered. See the Walmart returns page for returns information.
- Additional Information:
- This offer is priced slightly higher ($2 more) than our popular front page deal from October 2023 in which earned 55 thumbs up when the set sold for $41.99.
- Rated 4.7 out of 5 stars at Walmart based on over 2760 customer reviews.
- Please see the original post for additional details and/or view the Wiki and forum comments for further helpful discussion if available.
Original Post
Written by
Edited March 3, 2024
at 07:59 PM
Ophanie 5-Setting High Pressure Shower Head, 12 inch Rain Shower Head with Handheld and Hose
Original price: $89.99
Sale price: $43.99
https://www.walmart.com/ip/5-Sett...13120905
Original price: $89.99
Sale price: $43.99
https://www.walmart.com/ip/5-Sett...13120905
Created 03-03-2024
at 07:27 PM
by raisinbagel
in
Bed & Bath
(3)
If you purchase something through a post on our site, Slickdeals may get a small share of the sale.
| Product Name: | 5-Setting High Pressure Shower Heads for Bathroom 12 inch Rain Shower Head with Handheld Combo Dual Rainfall Shower Head with Hose Chrome & Black |
| Product Description: | Whether you love a stronger massage mode or a soft mist the rainfall dual shower head combo has got it all. The handheld shower head delivers 5 spray modes: Power Massage Rain + Massage Rain Rain + Mist Mist! Use the power massage setting after a long day at the office or the mist mode for washing the kiddos. Best yet both are easy to install. No need to waste money on expensive plumbers. |
| Product SKU: | 1312090503 |
| UPC: | 706189602935 |
Recommended Deal Alerts For You
What are Deal Alerts?
Want more deals like this?
Create a deal alert for Bed & Bath.
Add Deal Alert for Bed & Bath
64 Comments
Your comment cannot be blank.
Featured Comments
Similar to lightbulbs , I have accumulated a random library of experience when it comes to showerheads. TLDR is in my experience none of these "high pressure" rainshower heads really deliver what they promise. It's kind of an oxymoron actually because for the amount of water rain shower heads deliver, I don't see how they can physically deliver "higher pressure". Typically the only way to do this is to remove any restrictors in the showerhead to increase GPM (gallons per minute) flow. If you do this, then maybe you can get higher pressure/flow, but at the cost of paying 2-3 times as much for a shower session. For a family of 5, this is a no go for me.
Awhile back I went down the oxygenated (Oxygenics) shower head route. FWIW, these shower heads absolutely deliver on higher pressure, but almost to a fault. First time I used one it actually hurt it came out so hard, but eventually I learned to actually enjoy the pressure. They also do it using a reasonable GPM rate (1.8'ish). The basic principle is that the head actually sucks in air using the pressure of the outcoming water, mixes it back into the water and pressurizes it more. This achieves both higher pressure as well as the feel that there's more water than there is actually coming out because the water is "bubbly" if that makes sense. Bigger globs of it vs. streams.
After using Oxygenic shower heads for a few years, me and the wife actually decided we didn't like them. The main down side to these are that they work SO well, that they create a vortex of air inside your shower. This air can absolutely be felt , like a breeze or draft, especially around the lower parts of your body where the water isn't hitting directly. It's strong enough to lift shower curtains. Having parts of your body feel cool during a hot shower sucks. Also, Oxygenic shower heads are ugly IMO.
Eventually we landed on High Sierra shower heads. These have similar performance of an Oxygenics head, but without using oxygenated water.. rather just good shower head design. We own all 3 GPM flows, 1.5, 1.8 and 2.0, and while you can tell the 1.5 is more water efficient, the pressure and enjoyment level is relatively equal for all 3.
So, efficient water usage.. amazing pressure, no draft. All around win for the most part.. the only downside is that High Sierra heads use the basic principles of a firehose design, so all the water comes out of one center hole, which means there's no reason to have this big plate hanging above you. Aesthetically this makes it a bit of anamoly vs. other showerheads.
So there you have it. Take all my useless knowledge and experience on traversing the shower head landscape. Recommend High Sierra if you're after good pressure that's water efficient.
Rain shower heads are a totally different type of sensation. Personally I would much rather have high pressure vs. avg pressure + a bunch of streams, and I've never seen a rainshower head that can deliver both decent pressure and water efficiency. I've never stood in the rain and marveled how nice it felt. But to each their own.
Aside from that, they're all pretty identical. Just need to pick which flow rate you want. I would say 1.8gpm ( as the number suggests) is the best middle road. The 1.5gpm still feels great, but there is a noticable difference in how much water falls down your body vs the 2.0 gpm. It's actually kinda surprising (in a good way) how satisfying the pressure and flow is relative to how little water actually hits the ground.
Another thing i forgot to mention about the Oxygenics vs High Sierra is that the oxygenic heads tend to cool the water temp due to the injected air. Depending on how hot your water is to begin with, this could result in you never being able to get the water as hot as you want.
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank wuss
Similar to lightbulbs , I have accumulated a random library of experience when it comes to showerheads. TLDR is in my experience none of these "high pressure" rainshower heads really deliver what they promise. It's kind of an oxymoron actually because for the amount of water rain shower heads deliver, I don't see how they can physically deliver "higher pressure". Typically the only way to do this is to remove any restrictors in the showerhead to increase GPM (gallons per minute) flow. If you do this, then maybe you can get higher pressure/flow, but at the cost of paying 2-3 times as much for a shower session. For a family of 5, this is a no go for me.
Awhile back I went down the oxygenated (Oxygenics) shower head route. FWIW, these shower heads absolutely deliver on higher pressure, but almost to a fault. First time I used one it actually hurt it came out so hard, but eventually I learned to actually enjoy the pressure. They also do it using a reasonable GPM rate (1.8'ish). The basic principle is that the head actually sucks in air using the pressure of the outcoming water, mixes it back into the water and pressurizes it more. This achieves both higher pressure as well as the feel that there's more water than there is actually coming out because the water is "bubbly" if that makes sense. Bigger globs of it vs. streams.
After using Oxygenic shower heads for a few years, me and the wife actually decided we didn't like them. The main down side to these are that they work SO well, that they create a vortex of air inside your shower. This air can absolutely be felt , like a breeze or draft, especially around the lower parts of your body where the water isn't hitting directly. It's strong enough to lift shower curtains. Having parts of your body feel cool during a hot shower sucks. Also, Oxygenic shower heads are ugly IMO.
Eventually we landed on High Sierra shower heads. These have similar performance of an Oxygenics head, but without using oxygenated water.. rather just good shower head design. We own all 3 GPM flows, 1.5, 1.8 and 2.0, and while you can tell the 1.5 is more water efficient, the pressure and enjoyment level is relatively equal for all 3.
So, efficient water usage.. amazing pressure, no draft. All around win for the most part.. the only downside is that High Sierra heads use the basic principles of a firehose design, so all the water comes out of one center hole, which means there's no reason to have this big plate hanging above you. Aesthetically this makes it a bit of anamoly vs. other showerheads.
So there you have it. Take all my useless knowledge and experience on traversing the shower head landscape. Recommend High Sierra if you're after good pressure that's water efficient.
Rain shower heads are a totally different type of sensation. Personally I would much rather have high pressure vs. avg pressure + a bunch of streams, and I've never seen a rainshower head that can deliver both decent pressure and water efficiency. I've never stood in the rain and marveled how nice it felt. But to each their own.
Similar to lightbulbs , I have accumulated a random library of experience when it comes to showerheads. TLDR is in my experience none of these "high pressure" rainshower heads really deliver what they promise. It's kind of an oxymoron actually because for the amount of water rain shower heads deliver, I don't see how they can physically deliver "higher pressure". Typically the only way to do this is to remove any restrictors in the showerhead to increase GPM (gallons per minute) flow. If you do this, then maybe you can get higher pressure/flow, but at the cost of paying 2-3 times as much for a shower session. For a family of 5, this is a no go for me.
Awhile back I went down the oxygenated (Oxygenics) shower head route. FWIW, these shower heads absolutely deliver on higher pressure, but almost to a fault. First time I used one it actually hurt it came out so hard, but eventually I learned to actually enjoy the pressure. They also do it using a reasonable GPM rate (1.8'ish). The basic principle is that the head actually sucks in air using the pressure of the outcoming water, mixes it back into the water and pressurizes it more. This achieves both higher pressure as well as the feel that there's more water than there is actually coming out because the water is "bubbly" if that makes sense. Bigger globs of it vs. streams.
After using Oxygenic shower heads for a few years, me and the wife actually decided we didn't like them. The main down side to these are that they work SO well, that they create a vortex of air inside your shower. This air can absolutely be felt , like a breeze or draft, especially around the lower parts of your body where the water isn't hitting directly. It's strong enough to lift shower curtains. Having parts of your body feel cool during a hot shower sucks. Also, Oxygenic shower heads are ugly IMO.
Eventually we landed on High Sierra shower heads. These have similar performance of an Oxygenics head, but without using oxygenated water.. rather just good shower head design. We own all 3 GPM flows, 1.5, 1.8 and 2.0, and while you can tell the 1.5 is more water efficient, the pressure and enjoyment level is relatively equal for all 3.
So, efficient water usage.. amazing pressure, no draft. All around win for the most part.. the only downside is that High Sierra heads use the basic principles of a firehose design, so all the water comes out of one center hole, which means there's no reason to have this big plate hanging above you. Aesthetically this makes it a bit of anamoly vs. other showerheads.
So there you have it. Take all my useless knowledge and experience on traversing the shower head landscape. Recommend High Sierra if you're after good pressure that's water efficient.
Rain shower heads are a totally different type of sensation. Personally I would much rather have high pressure vs. avg pressure + a bunch of streams, and I've never seen a rainshower head that can deliver both decent pressure and water efficiency. I've never stood in the rain and marveled how nice it felt. But to each their own.
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank wuss
Aside from that, they're all pretty identical. Just need to pick which flow rate you want. I would say 1.8gpm ( as the number suggests) is the best middle road. The 1.5gpm still feels great, but there is a noticable difference in how much water falls down your body vs the 2.0 gpm. It's actually kinda surprising (in a good way) how satisfying the pressure and flow is relative to how little water actually hits the ground.
Another thing i forgot to mention about the Oxygenics vs High Sierra is that the oxygenic heads tend to cool the water temp due to the injected air. Depending on how hot your water is to begin with, this could result in you never being able to get the water as hot as you want.
I'm not worried at all about efficiency. Want to upgrade our shower experience! Will give it a try thanks!
Our community has rated this post as helpful. If you agree, why not thank AncientBlackness
Similar to lightbulbs , I have accumulated a random library of experience when it comes to showerheads. TLDR is in my experience none of these "high pressure" rainshower heads really deliver what they promise. It's kind of an oxymoron actually because for the amount of water rain shower heads deliver, I don't see how they can physically deliver "higher pressure". Typically the only way to do this is to remove any restrictors in the showerhead to increase GPM (gallons per minute) flow. If you do this, then maybe you can get higher pressure/flow, but at the cost of paying 2-3 times as much for a shower session. For a family of 5, this is a no go for me.
Awhile back I went down the oxygenated (Oxygenics) shower head route. FWIW, these shower heads absolutely deliver on higher pressure, but almost to a fault. First time I used one it actually hurt it came out so hard, but eventually I learned to actually enjoy the pressure. They also do it using a reasonable GPM rate (1.8'ish). The basic principle is that the head actually sucks in air using the pressure of the outcoming water, mixes it back into the water and pressurizes it more. This achieves both higher pressure as well as the feel that there's more water than there is actually coming out because the water is "bubbly" if that makes sense. Bigger globs of it vs. streams.
After using Oxygenic shower heads for a few years, me and the wife actually decided we didn't like them. The main down side to these are that they work SO well, that they create a vortex of air inside your shower. This air can absolutely be felt , like a breeze or draft, especially around the lower parts of your body where the water isn't hitting directly. It's strong enough to lift shower curtains. Having parts of your body feel cool during a hot shower sucks. Also, Oxygenic shower heads are ugly IMO.
Eventually we landed on High Sierra shower heads. These have similar performance of an Oxygenics head, but without using oxygenated water.. rather just good shower head design. We own all 3 GPM flows, 1.5, 1.8 and 2.0, and while you can tell the 1.5 is more water efficient, the pressure and enjoyment level is relatively equal for all 3.
So, efficient water usage.. amazing pressure, no draft. All around win for the most part.. the only downside is that High Sierra heads use the basic principles of a firehose design, so all the water comes out of one center hole, which means there's no reason to have this big plate hanging above you. Aesthetically this makes it a bit of anamoly vs. other showerheads.
So there you have it. Take all my useless knowledge and experience on traversing the shower head landscape. Recommend High Sierra if you're after good pressure that's water efficient.
Rain shower heads are a totally different type of sensation. Personally I would much rather have high pressure vs. avg pressure + a bunch of streams, and I've never seen a rainshower head that can deliver both decent pressure and water efficiency. I've never stood in the rain and marveled how nice it felt. But to each their own.
Seems you should be on someone's showerhead design team. Thanks for the info.
Similar to lightbulbs , I have accumulated a random library of experience when it comes to showerheads. TLDR is in my experience none of these "high pressure" rainshower heads really deliver what they promise. It's kind of an oxymoron actually because for the amount of water rain shower heads deliver, I don't see how they can physically deliver "higher pressure". Typically the only way to do this is to remove any restrictors in the showerhead to increase GPM (gallons per minute) flow. If you do this, then maybe you can get higher pressure/flow, but at the cost of paying 2-3 times as much for a shower session. For a family of 5, this is a no go for me.
Awhile back I went down the oxygenated (Oxygenics) shower head route. FWIW, these shower heads absolutely deliver on higher pressure, but almost to a fault. First time I used one it actually hurt it came out so hard, but eventually I learned to actually enjoy the pressure. They also do it using a reasonable GPM rate (1.8'ish). The basic principle is that the head actually sucks in air using the pressure of the outcoming water, mixes it back into the water and pressurizes it more. This achieves both higher pressure as well as the feel that there's more water than there is actually coming out because the water is "bubbly" if that makes sense. Bigger globs of it vs. streams.
After using Oxygenic shower heads for a few years, me and the wife actually decided we didn't like them. The main down side to these are that they work SO well, that they create a vortex of air inside your shower. This air can absolutely be felt , like a breeze or draft, especially around the lower parts of your body where the water isn't hitting directly. It's strong enough to lift shower curtains. Having parts of your body feel cool during a hot shower sucks. Also, Oxygenic shower heads are ugly IMO.
Eventually we landed on High Sierra shower heads. These have similar performance of an Oxygenics head, but without using oxygenated water.. rather just good shower head design. We own all 3 GPM flows, 1.5, 1.8 and 2.0, and while you can tell the 1.5 is more water efficient, the pressure and enjoyment level is relatively equal for all 3.
So, efficient water usage.. amazing pressure, no draft. All around win for the most part.. the only downside is that High Sierra heads use the basic principles of a firehose design, so all the water comes out of one center hole, which means there's no reason to have this big plate hanging above you. Aesthetically this makes it a bit of anamoly vs. other showerheads.
So there you have it. Take all my useless knowledge and experience on traversing the shower head landscape. Recommend High Sierra if you're after good pressure that's water efficient.
Rain shower heads are a totally different type of sensation. Personally I would much rather have high pressure vs. avg pressure + a bunch of streams, and I've never seen a rainshower head that can deliver both decent pressure and water efficiency. I've never stood in the rain and marveled how nice it felt. But to each their own.