Original Post
Written by
Edited May 15, 2024
at 08:07 PM
by
Limited time deal on one of the best purifiers on the market
[Coverage] Designed to clean spaces up to 1,560 sq. ft. in 30 minutes.Noise Level : 22-52 dB(A).
[HyperCaptive Filtration System] Dynamic combination of a washable pre-filter, activated carbon filter, and Green True HEPA Filter effectively reduces 99.999% of 0.01-micron particles in the air, including pollen, pollutants, and other allergens; It also reduces 99% of volatile organic compounds and odor
[Smart Mode] With its Smart Mode feature, the Airmega automatically adapts to its surroundings by adjusting fan speeds based on the room's air quality; That means your unit is energy efficient without compromising effectiveness
[Eco Mdoe] When the air quality in the room remains purified for 30 minutes or more in Eco Mode, the fan will turn off to conserve energy, kicking on again when pollution is detected
[Sleep Mode] When the Airmega's built-in light and pollution sensors detect that the room has been dark and the air is clean for 3 minutes, Sleep Mode reduces the purifier's noise and power consumption
[Filter Alerts] The air filter indicator tells you when the filters need to be replaced and the prefilters need to be cleaned for maximum efficiency, based on how much air they have processed
[Air Quality Indicator] 24/7 pollution monitor air quality throughout the day, adjusting purification to the necessary level and saving energy when it's not needed
[Timer] Schedule the unit to purify for 1, 4, or 8 hours of use and conserve energy
[Warranty] 5-year Limited Manufacturer's Warranty
https://www.amazon.com/dp/B01C9RIACG
49 Comments
Your comment cannot be blank.
Featured Comments
3D printer should be in an enclosure at the very least. If you're printing any exotic materials you should be venting that out as well as certain filaments can produce toxic fumes.
15 lbs of activated charcoal
60 sq ft of hepa material
I replace my filter once in 5 years.
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank Arcanlaw
3D printer should be in an enclosure at the very least. If you're printing any exotic materials you should be venting that out as well as certain filaments can produce toxic fumes.
3D printer should be in an enclosure at the very least. If you're printing any exotic materials you should be venting that out as well as certain filaments can produce toxic fumes.
Don't vent litter but do vent 3D printers. Unfortunately litter boxes are significantly distant from any window. And even with an enclosure and exhaust printer smell still travels around the room just through regular use.
I bought the Airmega 400 last time when there was a coupon that bought the price down to $332 a month ago. I run it on the main level, and I like how quiet it runs. I have a couple of Airmega and Winix around the house.
Sign up for a Slickdeals account to remove this ad.
replacement filters usually pop up on here for ~$78 and they're generally good for at least a year in my experience
Our community has rated this post as helpful. If you agree, why not thank CoolKestrel1061
15 lbs of activated charcoal
60 sq ft of hepa material
I replace my filter once in 5 years.
https://www.amazon.com/dp/B0CWL4Z...42bSJ
Sorry for not specifying "OEM filters"
Ahhhh. I see that now as Amazon is recommending sponsored non oem filters. My bad for seeming harsh and your price was correct for oem. Best price I got for oem was $65 for a pair through Walmart.