expiredlasiurus posted Nov 01, 2019 07:17 PM
Item 1 of 2
Item 1 of 2
expiredlasiurus posted Nov 01, 2019 07:17 PM
Cricut EasyPress 2 Heat Press Machine (6" x 7")
+ Free Shipping$69
$140
50% offAmazon
Visit AmazonGood Deal
Bad Deal
Save
Share
Heads up, this deal has expired. Want to create a deal alert for this item?
Deal Details
Amazon.com has Cricut EasyPress 2 Heat Press Machine (6" x 7") on sale for $69. Shipping is free. Thanks lasiurus
Colors Available: Joann.com has Cricut EasyPress 2 Heat Press Machine (6" x 7") on sale for $69. Shipping is free.
Colors Available:
Colors Available: Joann.com has Cricut EasyPress 2 Heat Press Machine (6" x 7") on sale for $69. Shipping is free.
Colors Available:
Editor's Notes
Written by SlickDealio- Don't have Amazon Prime? Students can get a free 6-Month Amazon Prime trial with free 2-day shipping, unlimited video streaming & more.
- If you're not a student, there's also a free 1-Month Amazon Prime trial available.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Amazon.com has Cricut EasyPress 2 Heat Press Machine (6" x 7") on sale for $69. Shipping is free. Thanks lasiurus
Colors Available: Joann.com has Cricut EasyPress 2 Heat Press Machine (6" x 7") on sale for $69. Shipping is free.
Colors Available:
Colors Available: Joann.com has Cricut EasyPress 2 Heat Press Machine (6" x 7") on sale for $69. Shipping is free.
Colors Available:
Editor's Notes
Written by SlickDealio- Don't have Amazon Prime? Students can get a free 6-Month Amazon Prime trial with free 2-day shipping, unlimited video streaming & more.
- If you're not a student, there's also a free 1-Month Amazon Prime trial available.
Community Voting
Deal Score
+36
Good Deal
Bad Deal
$54$9040% off[AC] $54.00: Stanley IceFlow 2.0 Flip Straw Jug with Handle 96 oz | Twist On Lid and Flip Up Straw | Leakproof for Travel and Sports | Insulated Stainless Steel | BPA-Free | Frost
0
There is no voting data on this thread
$9.37$1327% off7.5-Lb Hershey's Chocolate Flavored Syrup $9.37 w/S&S + Free Shipping w/ Prime or on $35+
11
There is no voting data on this thread
$49$13764% offRT Atlanta to Ft Lauderdale or Vice Versa $49 Nonstop Airfares on JetBlue BE (Limited Travel January - March 2026)
1
There is no voting data on this thread
$20$4252% off2-Pack 25' DeWALT Magnetic Tape Measure $19.88
5
There is no voting data on this thread
$9.37$1327% off7.5-Lb Hershey's Chocolate Flavored Syrup $9.37 w/S&S + Free Shipping w/ Prime or on $35+
11
There is no voting data on this thread
$18$2937% off2-Meter Apple 240W USB-C to USB-C Woven Charge Cable & More $18.00 +FS w/Prime
2
There is no voting data on this thread
$90$18050% offIKEA Symfonisk Sonos bookshelf speaker $90 in store YMMV
10
There is no voting data on this thread
$5.99$9.9940% offCicis Pizza $5.99 all you can eat buffet Mondays & Tuesdays through Feb 10
1
There is no voting data on this thread
$120$30560% offMoen Elongated Electric Heated Bidet Seat $119.99
0
There is no voting data on this thread
Leave a Comment
Top Comments
I will say this, Think about what you are going to be doing and planning accordingly. I got the 9x9 and thought it was a nice size, in truth it is and I haven't had any issues with it... having said that, I do a lot of adult shirts and often the size of the HTV is 11"x3"-12". All that means is that I am doing multiple presses and the hot plate is usually overlapping spots. a 6"x7" would be easier to do multiple presses and not fear I am going to overheat the vinyl or something. In hindsight I should have just got the big dog, but too late now.
As for why not use you iron, it can be fine, it was initially for me save for a few things. )1 I would often notice little divers where the steam holes are on the iron (because they have the hole and little indentation around it, if your iron doesn't then maybe no issue for you). 2) If you have something go south while crafting you may get stuff all over the iron, probably depends on how often you use it. 3) My iron was about $40 at wally world and the plate does not heat evenly, I don't know how hot it is getting, and the hottest part is the point, which makes for a much more inconvenient time pressing.
A good iron runs about this price, so why not get one with more even heating, built in temperature dreading and timer? I did about 15 shirts before I decided to treat myself with the easy press and since I've done about 30 more. I love it!
That's like saying a knife does multiple jobs so I'm not buying a vinyl cutter, scissors, more than 1 knife, a razor... Go look in an average woodshed and see how many saws there are... but maybe you don't really get into hobbies that use multiple types of the same thing. Sorry, I should just say go away troll; you come in here with the only intention of crapping on the thread, I'm sure there is an apple thread missing you.
26 Comments
Sign up for a Slickdeals account to remove this ad.
I will say this, Think about what you are going to be doing and planning accordingly. I got the 9x9 and thought it was a nice size, in truth it is and I haven't had any issues with it... having said that, I do a lot of adult shirts and often the size of the HTV is 11"x3"-12". All that means is that I am doing multiple presses and the hot plate is usually overlapping spots. a 6"x7" would be easier to do multiple presses and not fear I am going to overheat the vinyl or something. In hindsight I should have just got the big dog, but too late now.
As for why not use you iron, it can be fine, it was initially for me save for a few things. )1 I would often notice little divers where the steam holes are on the iron (because they have the hole and little indentation around it, if your iron doesn't then maybe no issue for you). 2) If you have something go south while crafting you may get stuff all over the iron, probably depends on how often you use it. 3) My iron was about $40 at wally world and the plate does not heat evenly, I don't know how hot it is getting, and the hottest part is the point, which makes for a much more inconvenient time pressing.
A good iron runs about this price, so why not get one with more even heating, built in temperature dreading and timer? I did about 15 shirts before I decided to treat myself with the easy press and since I've done about 30 more. I love it!
That's like saying a knife does multiple jobs so I'm not buying a vinyl cutter, scissors, more than 1 knife, a razor... Go look in an average woodshed and see how many saws there are... but maybe you don't really get into hobbies that use multiple types of the same thing. Sorry, I should just say go away troll; you come in here with the only intention of crapping on the thread, I'm sure there is an apple thread missing you.
Sign up for a Slickdeals account to remove this ad.
I will say this, Think about what you are going to be doing and planning accordingly. I got the 9x9 and thought it was a nice size, in truth it is and I haven't had any issues with it... having said that, I do a lot of adult shirts and often the size of the HTV is 11"x3"-12". All that means is that I am doing multiple presses and the hot plate is usually overlapping spots. a 6"x7" would be easier to do multiple presses and not fear I am going to overheat the vinyl or something. In hindsight I should have just got the big dog, but too late now.
As for why not use you iron, it can be fine, it was initially for me save for a few things. )1 I would often notice little divers where the steam holes are on the iron (because they have the hole and little indentation around it, if your iron doesn't then maybe no issue for you). 2) If you have something go south while crafting you may get stuff all over the iron, probably depends on how often you use it. 3) My iron was about $40 at wally world and the plate does not heat evenly, I don't know how hot it is getting, and the hottest part is the point, which makes for a much more inconvenient time pressing.
A good iron runs about this price, so why not get one with more even heating, built in temperature dreading and timer? I did about 15 shirts before I decided to treat myself with the easy press and since I've done about 30 more. I love it!
I will say this, Think about what you are going to be doing and planning accordingly. I got the 9x9 and thought it was a nice size, in truth it is and I haven't had any issues with it... having said that, I do a lot of adult shirts and often the size of the HTV is 11"x3"-12". All that means is that I am doing multiple presses and the hot plate is usually overlapping spots. a 6"x7" would be easier to do multiple presses and not fear I am going to overheat the vinyl or something. In hindsight I should have just got the big dog, but too late now.
As for why not use you iron, it can be fine, it was initially for me save for a few things. )1 I would often notice little divers where the steam holes are on the iron (because they have the hole and little indentation around it, if your iron doesn't then maybe no issue for you). 2) If you have something go south while crafting you may get stuff all over the iron, probably depends on how often you use it. 3) My iron was about $40 at wally world and the plate does not heat evenly, I don't know how hot it is getting, and the hottest part is the point, which makes for a much more inconvenient time pressing.
A good iron runs about this price, so why not get one with more even heating, built in temperature dreading and timer? I did about 15 shirts before I decided to treat myself with the easy press and since I've done about 30 more. I love it!
best purchase I have made aside from my Cricut when it comes to crafting. As mentioned before..... adult shirts are typically close to a 12"x12" htv cut. This is something I chose to spend a little more on and it paid off. It pays for itself over time.
Sign up for a Slickdeals account to remove this ad.
(That's a random example, brand might be junk)
Leave a Comment