https://www.rockler.com/bessey-re...-kp-blocks
So if you missed the amazon deal, here is a very similar, and slightly cheaper deal at Rockler. This kit has riser blocks, as opposed to clamp extensions.
From the site:
Features:
Sturdy jaw construction with metal-reinforced plastic housing
End clip is easily removable without tools so you can convert the clamp to a spreader
Adjustable, removable plastic risers lift your work off of the bar to eliminate marring and glue smearing
No-mar clamp faces are glue- and solvent-resistant
Clamp faces are removable to fit optional accessories like the Pivoting Jaw Faces (#51431, sold separately)
Included KP Blocks let you set up a stable frame clamping fixture, ensuring square corners and no-tip performance
21 Comments
Your comment cannot be blank.
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank ScubaSon
There are great resources on YouTube on types of clamps. Pipe clamps are great and perfect for some applications. It really depends on what you are doing. These clamps are the ferrari of clamps though.
But, if deep pockets and bragging rights, these are nice for a slight discount of $5 each that is just the beginning...
But, if deep pockets and bragging rights, these are nice for a slight discount of $5 each that is just the beginning...
Which pipe clamps do you recommend? I'm shopping for some now. I was thinking 1/2" Bessey pipe clamps. I can get a 10' pipe cut to 3'-3'-2'-2' or 4'-4'-2' for $14 plus cost of clamps.
Pipe comes wholesale in 21' sticks, but you can find decent used pipe everywhere, including recycle/salvage yards, local junk man, etc. Don't forget that when you cut the pipe, one end has to be threaded. We have pipe threaders, so I have no idea what the hardware stores charge to thread one end of each.
The nice thing about pieces of decent used pipe is that both ends should already be threaded and you just cut to size in the middle with a sawzall, grinder with a cut off blade or whatever. The same could be said about buying new black pipe in various lengths that are threaded on each end. When you cut in the middle, you have two sticks already threaded on one end and ready to go.
You will have to figure the best cost for you and what you want.
I bought these on clearance from Lowes back in 2013 or so, paying between $20-$30 per clamp, depending on length (( bought 4 24" and 4 48"), but haven't seen a price anywhere near that anywhere, so this is probably as good as it gets. They're really strong clamps with great capacity and solid design. I did break the tightning mechanism on one with too much pressure, although in hindsight I was being a little ridiculous at the time. I believe I was using a wrench to tighten it beyond what I could do with my hands.
These are absolutely amazing. I own 12 I. Different sizes from 12" to their 65".
Best purchase I've done for woodworking.
No bending or bowing, no need to use cauls to hold down stock when gluing panels or boards
Sign up for a Slickdeals account to remove this ad.
Best purchase I've done for woodworking.
No bending or bowing, no need to use cauls to hold down stock when gluing panels or boards
Maybe not the best. But one of the best
Maybe you should start making things first, then you'll know the lengths of the clamps that you need.
Seems that this $190 Rockler kit actually is a deal for all that's included.
It's nice to have a a few clamps that aren't as heavy as pipe clamps.
edit:. Now I see others are already pointing this out.
Seems that this $190 Rockler kit actually is a deal for all that's included.
And the 50"ones are each $15 less than the 40" everyday at home depot. For about the same price you can get bigger ones, everyday. This is no deal.