Original Post
Written by
Edited April 13, 2021
at 05:33 AM
by
Items: $29.92
Your Coupon Savings: -$4.45
Total Before Tax: $25.47
I just ordered a Klein Tools 935DAG for $25.47 after coupon from Amazon. CCC shows $29.92 as lowest price, however it's not taking the coupon into consideration so I don't know if there have previously been better coupons based on my research of CCC and past SD posts.
Seems to me to be a good price for this unit, but curious to what the community thinks about this tool compared to any other options out there in this price range.
https://www.amazon.com/dp/B07ZWW3...CGb333KKFN
91 Comments
Your comment cannot be blank.
Featured Comments
Update:
Searched around and it seems that vs. Wixey the Klein has:
-stronger magnets
-AAA batteries vs. CR2032
-Better display
Sign up for a Slickdeals account to remove this ad.
For those willing to take the risk, skills are a start. In addition, a temperature controlled soldering iron with a higher temperature capacity would be recommended.
Sign up for a Slickdeals account to remove this ad.
Seriously though folks, my advice is to not buy this. It's essentially useless. Do you want to know the angle of an incline or do you just want to be sure that something is vertical or horizontal? Use a spirit level. I rest my case.
Just put lift kit on your Jeep and need to check your pinion angle? definitely can't do that with a level either.
Now if you're using it to hang a picture frame, then you're probably wasting your $$
Doing alignments and replacing parts is two different things. All you need is a paint marker for what you're saying and that will get you just as close, but you don't have a proper alignment still.
Maybe you ought contact Klein? I tend to use it often and have hand no trouble setting it on my table saw, zeroing, then stick it magnetically on the blade and adjust to some fairly odd angles and I haven't been misled by that happy little orange box. My brain doing offhand division of a 45 degree by 4, but not the box.
For those willing to take the risk, skills are a start. In addition, a temperature controlled soldering iron with a higher temperature capacity would be recommended.
Agreed. I set mine to 750 C only. Best way to check for the battery. If it explodes, ya hit the jackpot!
Sign up for a Slickdeals account to remove this ad.