expired
8-Ounce Permatex Aluminum Anti-Seize Lubricant
$6.75
$8.99
24% off
+ Free Store Pickupat Advance Auto Parts
Missed This Deal? Get alerts when similar deals are posted.
+ Free Store Pickupat Advance Auto PartsDeal Details
Advance Auto Parts has 8-Ounce Permatex Aluminum Anti-Seize Lubricant on sale for $6.74 when you apply promo code OFFERS25 in your cart. Select free store pickup where available otherwise shipping is free on $35+ orders.
Thanks to community member GimmeYoTots.
Thanks to community member GimmeYoTots.
- Note: Availability for pickup may vary by location.
- Visit the page for 8-Ounce Permatex Aluminum Anti-Seize Lubricant
- Select "Add to Cart" under the Store Pickup section
- Note: You may need to select your desired pickup store before adding
- Continue to your cart
- In your cart apply promo code OFFERS25
- Your total will be $8.99 - $2.74 promo code = $6.74 with free store pickup
- Highly refined blend of aluminum, copper, and graphite lubricants
- Salt, corrosion and moisture resistant
- Prevents galling, corrosion and seizing to assure easier disassembly
- Temperature Range: -60 Deg. F to 1600 Deg. F (-51 Deg. C to 871 Deg. C)
- Ideal for marine use
Editor's Notes
Written by SaltyOne | Staff- About this Deal:
- At the time of this posting, Our research indicates that this is $1.85 lower (21.5% savings) than the next best available prices for similar products with prices starting from $8.59. -SaltyOne
- Rated 4.8 out of 5 stars from over 560 reviews
- About this Store:
- Return Policy: 45 Days
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Advance Auto Parts has 8-Ounce Permatex Aluminum Anti-Seize Lubricant on sale for $6.74 when you apply promo code OFFERS25 in your cart. Select free store pickup where available otherwise shipping is free on $35+ orders.
Thanks to community member GimmeYoTots.
Thanks to community member GimmeYoTots.
- Note: Availability for pickup may vary by location.
- Visit the page for 8-Ounce Permatex Aluminum Anti-Seize Lubricant
- Select "Add to Cart" under the Store Pickup section
- Note: You may need to select your desired pickup store before adding
- Continue to your cart
- In your cart apply promo code OFFERS25
- Your total will be $8.99 - $2.74 promo code = $6.74 with free store pickup
- Highly refined blend of aluminum, copper, and graphite lubricants
- Salt, corrosion and moisture resistant
- Prevents galling, corrosion and seizing to assure easier disassembly
- Temperature Range: -60 Deg. F to 1600 Deg. F (-51 Deg. C to 871 Deg. C)
- Ideal for marine use
Editor's Notes
Written by SaltyOne | Staff- About this Deal:
- At the time of this posting, Our research indicates that this is $1.85 lower (21.5% savings) than the next best available prices for similar products with prices starting from $8.59. -SaltyOne
- Rated 4.8 out of 5 stars from over 560 reviews
- About this Store:
- Return Policy: 45 Days
Community Voting
Deal
Score
+46
Good Deal
Bad Deal
Top Comments
1. It product is VERY toxic when ingested, take no chances.
2. It is not a protective dielectric grease or designed to be used as a safe conductive grease;the metals in the grease itself can react with the anode/tank and actually cause corrosion problems. Which in turn will act as a barrier to the electron exchange between the anode and the steel of the heater tank. This means that it would limit or prevent the anode from doing it's job. (Unfortunately most conductive grease is also very toxic)
You'll find your anode is in great condition after you have to replace your rusted out water heater. The anode MUST have a good electrical contact to the steel tank to work, and serve it's purpose as a sacrificial anode. 👍
If you want to know more, here is a decent wikipedia on the subject.
https://en.m.wikipedia.
I would also advise against heavily wrapping the anode threads with Teflon tape for the exact same reason. If you only do about two layers you might be okay, because while screwing the anode into the tank fitting the abrasion of the thread should cut the Teflon enough to allow the edges of the thread to come in contact with a threads of the tank fitting. The surfaces of the threads that contact between the anode and tank will still corrode and bind together, but it will be a much smaller surface area. I don't know how much the reduced contact surface would affect the function of the anode, so it's up to you if you want to take that chance or not.
My advice to you is to do one of two things; number one would be to give the anode a quarter turn every 6 months and then turn it back to break loose any fused surfaces.
Number two would be to look for an anode that has a brass threading or brass plating over the threads. This will dramatically reduce the amount of galvanic corrosion that will occur between the threads of the anode and the steel tank. You should be able to find that feature in any high-end anode, but for a $ price. If you really wanted to, before installation, you could easily heat up the threading of the anode with a torch and then rub a brass wire brush over the surface to give it a light coating a brass over the surface of the threads, basically a do-it-yourself plating for the anode.
I would generally recommend the 6 month turn method, but it just depends on how much you think your time is worth.
https://www.menards.com/main/tool...207395.h
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
154 Comments
Sign up for a Slickdeals account to remove this ad.
Lug-nuts love it.
When you are done with it, give it to your grandchildren.
Sign up for a Slickdeals account to remove this ad.
Lug-nuts love it.
When you are done with it, give it to your grandchildren.
I have a 1oz tube of this stuff that's still half full after 15 years. There are only so many spark plug changes you can do...
Lug-nuts love it.
When you are done with it, give it to your grandchildren.
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
https://www.menards.com/main/tool...207395.h
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!