Did this coupon
work for you?
work for you?
Quote
:
1 x M.2 NVME to USB 3.1 Type-C SSD Enclosure1 x USB C to USB C Gen2 Cable (10Gbps) 1 x USB A to USB C Cable (10Gbps) 1 x Thermal Conductive Pad 1 x Screw Set : 4 screws (2*Scew A and 2*Screw B) and 2 washers, extra screws in case of losing them; 1 x Screw Driver Notice: Both cables up to 10Gbps transfer speed. The actual speed depends on the speed of your SSD, USB Port type, your computer performance etc, nvme ssd is not included. |
Quote
:
【Applicable SSD 】- This M.2 SSD Enclosure only for NVMe M-Key M.2 SSD (PCIE-based). Applicable to sizes 2242 / 2260 / 2280 solid state drivers. Does not support M.2 SATA based SSDs, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs.【Type C interface】- Both side can be inserted; USB-C Gen 2 10Gbps or Thunderbolt 3 are recommended for extreme speed performance. One HD movie transfer only takes 2 seconds; Backward compatible with USB 3.1 Gen1 and USB 3.0 up to 5Gbps. 【Aluminum Alloy Shell】- Adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, be portable and easy to carry; 【Blue Indicator】- Blue Indicator shows the data transfer status, easy and clear; 【High Quality Master Chip】- Adopts high performance controller IC, Complies with UASP, Trim which can effectively improve the speed and exteend the lifetime of SSD. Compatible Multi OS, Windows 7/ 8/ 8.1/ 10/ Linux/ MAC. Attention: It supports PCI-E based M key & (M+B) key M.2 NVME SSD up to 4TB; SATA-based B Key & (B+M) Key M.2 SSD or PCIe AHCI SSD or MacBook original SSD are not supported! Interface type: M.2 NVME PCIe to USB 3.1 Gen 2 Support SSD Drivers Size: 2242, 2260, 2280mm Case Size: 115*39*11mm High performance controller chip (JMS583) |
The link has been copied to the clipboard.
49 Comments
Your comment cannot be blank.
Featured Comments
People have experienced stability issues with JMS583. RTL9210 and ASM2362 are better with RTL9210 being the better of the two.
If yours is https://www.amazon.com/WAVLINK-Ce...07YB4DDRB/ it's priced at $79.99 more than 4 times the cost of the OPs one.
Please don't post "better options" that aren't even in the ball park price wise.
Sign up for a Slickdeals account to remove this ad.
I have thunderbolt 3 enabled wavlink enclosure and gives me 1800mbps read/write
A TB3 enclosure at the $16.99 price range?
If yours is https://www.amazon.com/WAVLINK-Ce...07YB4DDRB/ it's priced at $79.99 more than 4 times the cost of the OPs one.
Please don't post "better options" that aren't even in the ball park price wise.
Our community has rated this post as helpful. If you agree, why not thank ChronoTriggered
Is that a good thing or a bad one ? Sorry for my ignorance. I'm actually looking for an NVME enclosure and the price I think is ok, compared to 20 and up for others, but I wouldn't mind getting something else. Thank you.
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank arunix
People have experienced stability issues with JMS583. RTL9210 and ASM2362 are better with RTL9210 being the better of the two.
People have experienced stability issues with JMS583. RTL9210 and ASM2362 are better with RTL9210 being the better of the two.
The first one I got though bricked on the firmware update, which was needed to keep it from disconnecting. No problem though, amazon sent me a new one right away, update worked and good to go.
Some positives, it stays cool, maybe because of speed, but its pretty well ventilated and just plastic. The cables it comes with though, NICE. They work great, nice and short, I don't use my Sabrent cable anymore, I use the ones that came with this. very very good quality.
YMMV, but if you need something for your slower M.2 drives, can't get better than this one.
Cheers.