miibuy via Amazon [amazon.com] has
Lavaudio Mini Bluetooth Audio Amplifier Receiver, 2.1 Channel Hi-Fi Stereo Amplifier Home Audio with APTX-HD, Class D，100Wx2 for Passive Speakers/Subwoofer, 3.5mm/RCA/Optical in with Power Supply on sale for $109 - 50% Off = $54.50 with promotion code
50CT4DW2 at checkout. Shipping is free.
- Bluetooth 5.0
- Provide 100W*2 output, 2.1 Channel ClassD Stereo Hi-Fi AMP for your home audio.
- Drive 3Ohm-8Ohm passive speakers
- Hi-Fi&APTX-HD codec
- Up to 50ft long range, no pop, no audible sound, no overheat
- Support pair and connect two devices simultaneously (Switch to listen musics by two device easily, pause one and play another directly )
- Support Bass&Treble Control
- FULL METAL shells to ensure the high quality to bring you a simple and textured life.
Leave a Comment
62 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank luddite_cyborg
For example, when using line in mode, you can control the volume by attenuating the input signal (changing the volume on the source device). However, when in bluetooth, the source level is kept fixed, so the only way to adjust the volume is to physically walk up to the unit and turn the knob. And there's no remote, despite how cheap this would be today.
Worse, when in bluetooth mode, the volume knob doesn't have the full range. Below a certain point, the volume cuts off completely, despite the fact that it's still fairly loud and I'd like it to be quieter. Can't adjust it on the source, that level is fixed until a certain point, at which point it, too, drops out all at once.
If I could only adjust the source level for bluetooth, I could set the volume knob somewhere appropriate for the situation, and fine tune with the source volume control (i.e. my phone). Instead, I don't have the range of control I'd want _at all_.
Also, this device is super eager to pair in bluetooth, regardless of what mode it's in. It can be in line-in mode, happily playing away, and then I come home and my phone automatically pairs, and starts steaming all the phone's audio to speakers which I didn't want to use and which aren't even switched to that source! The only way to "correct" this is to turn off bluetooth on my phone, or manually unpair (which requires re-pairing next time I want to use it).
Finally, when it is in bluetooth mode and playing sound, I have found literally NO way to switch back to line-in mode other than physically power-cycling the device. This isn't hugely inconvenient since there's no remote anyway, but it's a highly unintuitive UI design.
Audio quality gets no comment as the UI design is far too frustrating.
The Lavaudio has a metal chassis instead of a plastic one and that could shield it better from interference.
"to bring you a simple and textured life"
"a happy cloud to rain love soundy for special life musics"
Can't the Chinese hire someone who can write English? I know they are cheap, but c'mon man! Fiver.com
"to bring you a simple and textured life"
"a happy cloud to rain love soundy for special life musics"
Can't the Chinese hire someone who can write English? I know they are cheap, but c'mon man! Fiver.com
Sign up for a Slickdeals account to remove this ad.
Bad for BT headphones too, because the BT is receive only, not transmit.
I have the mii version of this amp for our speakers outside. It's been great.
All of the ui frustrations listed are related to not using the device as intended. Granted it could be a little more flexible but it does a good job of what it was meant for.
Bad for BT headphones too, because the BT is receive only, not transmit.
if you want to use headphones you can get that product for much cheaper!
Our community has rated this post as helpful. If you agree, why not thank Azrael_the_Cat
The Lavaudio has a metal chassis instead of a plastic one and that could shield it better from interference.
Our community has rated this post as helpful. If you agree, why not thank Groch
If they are nuts, the FCCl:ID internal photos clearly show the plastic case. [fccid.io] Unshielded plastic cases (there is no shielding evident in the photos) are more prone to interference than metal chassis.
Sign up for a Slickdeals account to remove this ad.
There were, however, quality issues with it. I had to replace it because the treble and bass buttons were waaaay misaligned with the min max graphic.
They shipped me a replacement and it almost seems like the first one was a clone or something. I do like it now that the knobs are not totally retarded.
I also bought this one at full price ($75) which is metal cased with high quality knobs and more power (volume) than the plastic cased 1Mii:
https://www.amazon.com/gp/aw/d/B0...asin_title
I had to buy a separate BT receiver for it however because the BT range is tiny. Like 40 feet. I am okay with that because the sound seems to be clearer and of course longer range and because it is a solid Amp in my limited experience.
I am in for this one as well at this price. I like that there are various inputs to it and I an hoping the metal case and buttons are of better quality. Also hoping for more power output.
Leave a Comment