Did this coupon
work for you?
work for you?
Sorry, this deal has expired.
Get notified of deals like this in the future.
Add Deal Alert for this Item
Frontpage Deal
Anycubic 3D Resin Printers: Photon Mono $189, Photon Zero EXPIRED
$99
$219.00
+ Free Shipping
Anycubic.com has Anycubic Photon Zero 3D Resin Printer for $109 - $10 w/ discount code QHE4DJSA5YX2 = $99. Shipping is free.
Also available, Anycubic.com has Anycubic Photon Mono 3D Resin Printer for $199 - $10 w/ discount code QHE4DJSA5YX2 = $189. Shipping is free.
Thanks to community member cyciumx for finding this deal.
Also available, Anycubic.com has Anycubic Photon Mono 3D Resin Printer for $199 - $10 w/ discount code QHE4DJSA5YX2 = $189. Shipping is free.
Thanks to community member cyciumx for finding this deal.
Editor's Notes & Price Research
Written by
- About this deal:
- The Photon Zero is $120 lower (55% savings) than the $219 list price.
- The Photon Mono is $80 lower (26% savings) than the $269 list price.
- About this store:
- Anycubic return policy may be found here.
Good deal?
You gave thanks to cyciumx for this post.
Thank you!
cyciumx posted this deal. Say thanks!
Thank you!
cyciumx posted this deal. Say thanks!
Original Post
Written by
Edited May 25, 2021
at 12:15 PM
Enter code at checkout: QHE4DJSA5YX2
I've bought before and AnyCubic ships from the states so you will get this within a week. They don't charge tax in CA so likely tax free for almost anyone.
Free shipping if you order just the printer. If you buy extra parts and accessories they will charge $15 flat rate.
https://www.anycubic.co
https://www.anycubic.co
I've bought before and AnyCubic ships from the states so you will get this within a week. They don't charge tax in CA so likely tax free for almost anyone.
Free shipping if you order just the printer. If you buy extra parts and accessories they will charge $15 flat rate.
https://www.anycubic.co
https://www.anycubic.co
in
3D Printers
(4)
If you purchase something through a post on our site, Slickdeals may get a small share of the sale.
Check Out Similar Computers Deals
View AllPopular Deal
Frontpage Deal
$429
+ Free Shipping
62
144
Frontpage Deal
About the OP
90 Comments
Featured Comments
The thing people don't get looking outward in when comparing to an FDM is supports. Supports in resin printers can do what only FDM could ever dream of - stacking.
I can set a Photon Zero to print 15 minitures at once and go to sleep. Drop the entire build plate into a bucket of water and in 3 minutes that pile of lines and solids falls apart almost like butter. My Ender 3 V2 can't touch it for this use case.
And while it easily doesn't apply to all its disingenuous to compare a tool meant for other prints against one meant for this.
Sign up for a Slickdeals account to remove this ad.
It does, it looks like - the code works for $10 off. If you placed two separate orders you could get $10 off the Mono and then $10 off the rinse and cure.
Edit - those with low standards for shop aesthetic and the ability to wait for a sunny (or bright overcast) day will rightly point out that you can just set your prints in outside to cure, and then wash them in a bucket with a spoon or basket to agitate the water. If you don't want to wait for daylight, and would prefer a defined UV dose and a sealed/lidded container with automatic agitation and timer for your wash solution, and something that doesn't look like you hit the Rubbermaid section of the Dollar Store, $90 is actually pretty cost effective.
Pro
Edit - those with low standards for shop aesthetic and the ability to wait for a sunny (or bright overcast) day will rightly point out that you can just set your prints in outside to cure, and then wash them in a bucket with a spoon or basket to agitate the water. If you don't want to wait for daylight, and would prefer a defined UV dose and a sealed/lidded container with automatic agitation and timer for your wash solution, and something that doesn't look like you hit the Rubbermaid section of the Dollar Store, $90 is actually pretty cost effective.
Edit - those with low standards for shop aesthetic and the ability to wait for a sunny (or bright overcast) day will rightly point out that you can just set your prints in outside to cure, and then wash them in a bucket with a spoon or basket to agitate the water. If you don't want to wait for daylight, and would prefer a defined UV dose and a sealed/lidded container with automatic agitation and timer for your wash solution, and something that doesn't look like you hit the Rubbermaid section of the Dollar Store, $90 is actually pretty cost effective.
Edit - those with low standards for shop aesthetic and the ability to wait for a sunny (or bright overcast) day will rightly point out that you can just set your prints in outside to cure, and then wash them in a bucket with a spoon or basket to agitate the water. If you don't want to wait for daylight, and would prefer a defined UV dose and a sealed/lidded container with automatic agitation and timer for your wash solution, and something that doesn't look like you hit the Rubbermaid section of the Dollar Store, $90 is actually pretty cost effective.
Sign up for a Slickdeals account to remove this ad.
I want to get into resin printing as I like the more finished look but me thinks we need another year or two before these catch up to the point in which I will jump in.
Wish the W&C Plus were on sale. My 2.0 isn't big enough anymore (Mono X prints).
I want to get into resin printing as I like the more finished look but me thinks we need another year or two before these catch up to the point in which I will jump in.