Amazon has
Makita 18V LXT Lithium-Ion Brushless Cordless 2-Gallon HEPA Filter Portable Wet/Dry Dust Extractor/Vacuum (Tool Only, XCV11Z) on sale for
$142.46 (discount applies during checkout).
Shipping is free.
Thanks to community member
climbhard13 for finding this deal.
About this product:- Powerful BL Brushless motor delivers 57 CFM and 27 inches water lift of suction using an 18V LXT Lithium Ion battery (battery not included)
- Filter cleaning system is designed to maintain optimum suction efficiency and longer filter life. Working Sound Level- 76 dB(A)
- Efficient HEPA filter captures 99.97% of particulates. 3 microns and larger
- Up to 60 minutes of continuous run time using an 18V LXT Lithium Ion 5.0 Ah battery BL1850B (battery not included)
- L. E. D. Battery indicator shows charge level for 18V LXT Lithium Ion battery
- The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
- Compact and portable design; Weighs only 10.1 pounds with 18V LXT 5.0 Ah battery (battery not included)
Top Comments
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
20 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank kenebia
Sign up for a Slickdeals account to remove this ad.
Pre filter $25
Shoulder strap $10
= Pass
You can use a shop vac with a dust stopper/dust cyclone on a 5 gallon bucket as a poor man's dust extractor until a deal on an extractor pops up someday.
Pre filter $25
Shoulder strap $10
= Pass
But pre filter comes with it... it's basically a microfiber hoodie that goes over the actual hepa filter. you could easily make your own if you really wanted to, too.
shoulder strap... i got tons of these... if i really needed it id just pull it from any number of my other makita things. just take it off a duffle bag if you hafta. i don't use the strap at all, it is light enough to just hold in my hand.
You can use a shop vac with a dust stopper/dust cyclone on a 5 gallon bucket as a poor man's dust extractor until a deal on an extractor pops up someday.
OSHA requires a minimum of 25 CFM per inch of grinding/sanding/cutting wheel diameter. For example, if you are using a 5" angle grinder to polish concrete, then you need 5 times 25 CFM, or 125 CFM for sufficient dust extraction.
This vacuum only has 27 CFM. It barely moves any air at all. A $50 shop vac at Home Depot is hitting nearly 150 CFM.
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!