This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
Nice find, guess I'll go to costco and refund the difference via manager. (Purchased within a month)
Sine wave wise, as far as i know with my research for a week, PC power supplies now days can handle either Pure and Simulated without any problems.
The claims about PC PSU need Pure are majorly talking about PSU 10yrs ago without standard like modern gold plat certificate. They only situation you need Pure is the electronics with sensitive wave requirements, which are medical equipment and laser printers etc, search what electronics need pure sine wave if you needed.
Also the premium Pure battery replacement after 3 year will cost a bit more than Simulated.
I am NOT against people purchasing the higher quality Pure, I'm just here to state that simulated UPS is better bang for the buck in terms of using it as PC UPS.
Not necessarily better, but clearly different. However, since simulated sine wave occupies the entire bottom end of the market (from small power strip style units to ones like this CyberPower), there is a correlation that some buyers might make between more premium UPSes and the availability of pure sine wave. Will you find pure sine wave in a cheapo UPS? Basically never. Is a pure sine wave necessarily better than an otherwise equivalent simulated sine wave UPS? No, but typically pure sine wave models exist in a price and quality tier just above "average".
Compatibility issues with simulated sine wave are indeed far from a widespread issue, though a careful test might be recommended after giving the UPS a day or two to charge up. There are some risks to this test, but if you get 5-10 minutes of solid run-time you might expect the same in future real-world scenarios. I'll put a separate comment about my own recommendations regarding this issue.
One warning I'd add for an OLED TV is to check the peak power draw rating. I've seen OLED TVs rated for over 600W. This UPS is rated for a peak draw of 810W, and while an OLED would rarely reach peak draw often or for very long (unless you just stare at full brightness white screens all day?) you do want to ensure you have a decent overhead between your TV's potential peak draw and your UPS' peak load capacity. This is in part because you might need more than a couple of minutes to actually shut things down gracefully in the case of a power outage (and near peak load retail UPS times are indeed measured in minutes).
The specifications sheets for the two models suggest that the CP1350AVRLCD has denser batteries (9Ah vs 7Ah), giving it twice the runtime at peak load (and 50% more run time at half load). Of course, you could make this change yourself the next time you rotate those batteries out!
I do IT support for a number of fast food locations and we use almost exclusively CyberPower UPSs. Each location might have 8+ and they do what they're supposed to.
This looks like a slick deal to me (personally.) Been looking for a higher watt UPS that will cover my security system in case of power outage and the other black Friday deals were sub-400 watt. Plus with Costco's return policy I know that returns will be trouble free if I have any issues. (Cyberpower is a decent brand from what I can tell, so crossing my fingers and pulling the trigger.)
I do IT support for a number of fast food locations and we use almost exclusively CyberPower UPSs. Each location might have 8+ and they do what they're supposed to.
15
1
Like
Helpful
Funny
Not helpful
Nov 27, 2021 3:53 AM
1K Comments
Joined Feb 2012
This comment has been rated as unhelpful by Slickdeals users.
I do IT support for a number of fast food locations and we use almost exclusively CyberPower UPSs. Each location might have 8+ and they do what they're supposed to.
Our community has rated this post as helpful. If you agree, why not thank MagentaKitten833
Nice find, guess I'll go to costco and refund the difference via manager. (Purchased within a month)
Sine wave wise, as far as i know with my research for a week, PC power supplies now days can handle either Pure and Simulated without any problems.
The claims about PC PSU need Pure are majorly talking about PSU 10yrs ago without standard like modern gold plat certificate. They only situation you need Pure is the electronics with sensitive wave requirements, which are medical equipment and laser printers etc, search what electronics need pure sine wave if you needed.
Also the premium Pure battery replacement after 3 year will cost a bit more than Simulated.
I am NOT against people purchasing the higher quality Pure, I'm just here to state that simulated UPS is better bang for the buck in terms of using it as PC UPS.
14
3
1
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
Nice find, guess I'll go to costco and refund the difference via manager. (Purchased within a month)
Sine wave wise, as far as i know with my research for a week, PC power supplies now days can handle either Pure and Simulated without any problems.
The claims about PC PSU need Pure are majorly talking about PSU 10yrs ago without standard like modern gold plat certificate. They only situation you need Pure is the electronics with sensitive wave requirements, which are medical equipment and laser printers etc, search what electronics need pure sine wave if you needed.
Also the premium Pure battery replacement after 3 year will cost a bit more than Simulated.
I am NOT against people purchasing the higher quality Pure, I'm just here to state that simulated UPS is better bang for the buck in terms of using it as PC UPS.
It makes little difference normally. I have this or a very similar (1800VA, I think) unit in my office. One of the many things it powers is a night light, and that gets a hotspot when it's powered by this. It's the only device I know of that has any issue (and I have two wireless routers, and a bunch of other devices that this powers).
This looks like a slick deal to me (personally.) Been looking for a higher watt UPS that will cover my security system in case of power outage and the other black Friday deals were sub-400 watt. Plus with Costco's return policy I know that returns will be trouble free if I have any issues. (Cyberpower is a decent brand from what I can tell, so crossing my fingers and pulling the trigger.)
CyberPower is one of the better UPS manufacturers IMO, they've proven themselves over past decade. I've had a few now, mostly models just like this (full-size with display, simulated sine wave), none have failed yet after surely countless surges and brownouts. The usage displays are awesome. Batteries easy to replace (standard size 12V 7-9AH). Software is good enough, if needed (PC). I'd buy this if I needed one, highly recommended for PC (including router) or home theater.
Nice find, guess I'll go to costco and refund the difference via manager. (Purchased within a month)
Sine wave wise, as far as i know with my research for a week, PC power supplies now days can handle either Pure and Simulated without any problems.
The claims about PC PSU need Pure are majorly talking about PSU 10yrs ago without standard like modern gold plat certificate. They only situation you need Pure is the electronics with sensitive wave requirements, which are medical equipment and laser printers etc, search what electronics need pure sine wave if you needed.
Also the premium Pure battery replacement after 3 year will cost a bit more than Simulated.
I am NOT against people purchasing the higher quality Pure, I'm just here to state that simulated UPS is better bang for the buck in terms of using it as PC UPS.
It makes little difference normally. I have this or a very similar (1800VA, I think) unit in my office. One of the many things it powers is a night light, and that gets a hotspot when it's powered by this. It's the only device I know of that has any issue (and I have two wireless routers, and a bunch of other devices that this powers).
can you pls elaborate what you mean by "that gets a hotspot"? Not working, not stay on, or what?
Damnit, I've spent so much money today. My 1000/600 pure sine wave UPS cannot keep up when gaming on 2 34" ultrawides and the gaming PC (3090, 9900k)... might snag this now too.
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
Does anyone know what the functional difference is between this & the Intelligent LCD series version - CP1350AVRLCD? I'm trying to compare the two & other than a more accessible Mute button (vs menu option) on the CP1350AVRLCD model, which also lacks the USB A & USB-C ports, the model featured on this deal seems to be the better bargain even at regular price.
Everything else seems the same to me, otherwise. Wanted to see if I'm missing anything else here.
Like
Helpful
Funny
Not helpful
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
Top Comments
Sine wave wise, as far as i know with my research for a week, PC power supplies now days can handle either Pure and Simulated without any problems.
The claims about PC PSU need Pure are majorly talking about PSU 10yrs ago without standard like modern gold plat certificate. They only situation you need Pure is the electronics with sensitive wave requirements, which are medical equipment and laser printers etc, search what electronics need pure sine wave if you needed.
Also the premium Pure battery replacement after 3 year will cost a bit more than Simulated.
I am NOT against people purchasing the higher quality Pure, I'm just here to state that simulated UPS is better bang for the buck in terms of using it as PC UPS.
Compatibility issues with simulated sine wave are indeed far from a widespread issue, though a careful test might be recommended after giving the UPS a day or two to charge up. There are some risks to this test, but if you get 5-10 minutes of solid run-time you might expect the same in future real-world scenarios. I'll put a separate comment about my own recommendations regarding this issue.
One warning I'd add for an OLED TV is to check the peak power draw rating. I've seen OLED TVs rated for over 600W. This UPS is rated for a peak draw of 810W, and while an OLED would rarely reach peak draw often or for very long (unless you just stare at full brightness white screens all day?) you do want to ensure you have a decent overhead between your TV's potential peak draw and your UPS' peak load capacity. This is in part because you might need more than a couple of minutes to actually shut things down gracefully in the case of a power outage (and near peak load retail UPS times are indeed measured in minutes).
The specifications sheets for the two models suggest that the CP1350AVRLCD has denser batteries (9Ah vs 7Ah), giving it twice the runtime at peak load (and 50% more run time at half load). Of course, you could make this change yourself the next time you rotate those batteries out!
https://www.cyberpowers
https://www.cyberpowers
Good luck!
Jon
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
90 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank MagentaKitten833
Sine wave wise, as far as i know with my research for a week, PC power supplies now days can handle either Pure and Simulated without any problems.
The claims about PC PSU need Pure are majorly talking about PSU 10yrs ago without standard like modern gold plat certificate. They only situation you need Pure is the electronics with sensitive wave requirements, which are medical equipment and laser printers etc, search what electronics need pure sine wave if you needed.
Also the premium Pure battery replacement after 3 year will cost a bit more than Simulated.
I am NOT against people purchasing the higher quality Pure, I'm just here to state that simulated UPS is better bang for the buck in terms of using it as PC UPS.
Sign up for a Slickdeals account to remove this ad.
I have a number of similar APCs, so still holding out for the updated Cyberpower pure sine wave 1350 or 1500 to make it to Costco. Perhaps in 2022...
Sine wave wise, as far as i know with my research for a week, PC power supplies now days can handle either Pure and Simulated without any problems.
The claims about PC PSU need Pure are majorly talking about PSU 10yrs ago without standard like modern gold plat certificate. They only situation you need Pure is the electronics with sensitive wave requirements, which are medical equipment and laser printers etc, search what electronics need pure sine wave if you needed.
Also the premium Pure battery replacement after 3 year will cost a bit more than Simulated.
I am NOT against people purchasing the higher quality Pure, I'm just here to state that simulated UPS is better bang for the buck in terms of using it as PC UPS.
Sine wave wise, as far as i know with my research for a week, PC power supplies now days can handle either Pure and Simulated without any problems.
The claims about PC PSU need Pure are majorly talking about PSU 10yrs ago without standard like modern gold plat certificate. They only situation you need Pure is the electronics with sensitive wave requirements, which are medical equipment and laser printers etc, search what electronics need pure sine wave if you needed.
Also the premium Pure battery replacement after 3 year will cost a bit more than Simulated.
I am NOT against people purchasing the higher quality Pure, I'm just here to state that simulated UPS is better bang for the buck in terms of using it as PC UPS.
Sign up for a Slickdeals account to remove this ad.
Everything else seems the same to me, otherwise. Wanted to see if I'm missing anything else here.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!