Original Post
Written by
Edited November 27, 2021
at 06:39 AM
by
The Bosch Router Edge Guide is back on sale. And it includes the "$_ _ of if you buy $_ _ _ " promo.
if you recently got one of the awesome deals on the Bosch Routers, then this tool is a must have. It's the Best Edge Guide I've ever found that was made by a Tool Brand.
Protip: Wanting to run dadoes in a piece, but it's too far from the edge to use this? Well, the rods are 8mm and two, 8mm linear rods can be used in it, and the router bases, to provide any length you might need. I did this with my MFT Tabletops and I've seen people do this with 3/4" mortising bits to make dogholes in their bench.
So hop on it, an
https://www.amazon.com/dp/B00005R...BD9G4QW1ZJ
36 Comments
Your comment cannot be blank.
Featured Comments
If you buy this and the 1617EVSPK kit, it comes out to $156.99 pre-tax.
I 100% recommend the Bosch 1617 for both hand-held and table mounted use. Keep in mind, if you mount to the table you'll likely want a second router for hand-held use. At some point that is... I'm not suggesting you need to run out and buy both straight away. That's all need / project dependent.
Sign up for a Slickdeals account to remove this ad.
If you buy this and the 1617EVSPK kit, it comes out to $156.99 pre-tax.
In same boat but for Ryobi.
Fwiw one of the comments mentioned the ryobi trim router being a different spacing so it wouldn't work. I was looking for myself as well but seems it won't work.
Recommendations on what kind of router? Seeing 1617EVSPK someone recommended I was looking at but doesn't have tilt base, not sure how needed that is. Thanks
Sign up for a Slickdeals account to remove this ad.
Check the questions search on the Amazon listing. Seems that people have had good luck with the Dewalt and this but you may find more info specific to your Dewalt model on the listing ?
Recommendations on what kind of router? Seeing 1617EVSPK someone recommended I was looking at but doesn't have tilt base, not sure how needed that is. Thanks
Our community has rated this post as helpful. If you agree, why not thank cdmcc
Recommendations on what kind of router? Seeing 1617EVSPK someone recommended I was looking at but doesn't have tilt base, not sure how needed that is. Thanks
I 100% recommend the Bosch 1617 for both hand-held and table mounted use. Keep in mind, if you mount to the table you'll likely want a second router for hand-held use. At some point that is... I'm not suggesting you need to run out and buy both straight away. That's all need / project dependent.
Yep.. I do it all the time when they lower their prices like this.
Buy the lower priced one. Enter the old one as a return. And when the new one comes, just send the new one back to get a credit for the price of the old one you paid more for.