Adorama has iFi AUDIO xCAN Portable Balanced Bluetooth Headphones Amplifier on sale for $169.99. Shipping is free.
Thanks to Deal Editor iconian for finding this deal.
Features:
Powerful dual-mono headphone amplifier that can unleash the full dynamic range of hard to drive 600 ohm over ear phones while still driving many sensitive 32 ohm IEM with a silent background. Delivers 1000mW of power per channel Balanced and also a specially designed 'S-Balanced' circuit for Balanced (TRRS) 2.5mm and Single-Ended with (TRS) 3.5mm connectors Both offer exceptional low crosstalk and low distortion
'Cut the cord' and upgrade your existing wired headphones by using the built-in wireless Bluetooth input, which uses the aptX and AAC codecs with a dedicated DAC chip, for streaming music from your portable or home device to the xCAN receiver with 16 bit 44kHz CD quality sound. Compatible with your DAP ( digital audio player ), Android or Apple smartphone or tablet, laptop, smart TV or even Alexa and similar smart speakers
Start listening right away and all day with a 2220mAh battery that can supply 12-18 hours of playback. Accessories include a USB C charging cable, a mini to mini connector, and a 2.5mm balanced interconnect so you can connect to most any audio system component or converter right out the box
3D Holographic + and XBass II offer advanced analogue signal processing circuits that provide a more accurate and enjoyable sound by correcting low end bass and/or mid range frequencies and widening the soundstage to bring the music 'out of your head' creating a more a engaging sound. Puts the performer on stage in your home to add that extra natural quality to the mid range
At the time of this posting, Our research indicates that this is $129.01 lower (43.1% savings) than the next best available prices from reputable merchants with prices starting from $299.
This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
Adorama has iFi AUDIO xCAN Portable Balanced Bluetooth Headphones Amplifier on sale for $169.99. Shipping is free.
Thanks to Deal Editor iconian for finding this deal.
Features:
Powerful dual-mono headphone amplifier that can unleash the full dynamic range of hard to drive 600 ohm over ear phones while still driving many sensitive 32 ohm IEM with a silent background. Delivers 1000mW of power per channel Balanced and also a specially designed 'S-Balanced' circuit for Balanced (TRRS) 2.5mm and Single-Ended with (TRS) 3.5mm connectors Both offer exceptional low crosstalk and low distortion
'Cut the cord' and upgrade your existing wired headphones by using the built-in wireless Bluetooth input, which uses the aptX and AAC codecs with a dedicated DAC chip, for streaming music from your portable or home device to the xCAN receiver with 16 bit 44kHz CD quality sound. Compatible with your DAP ( digital audio player ), Android or Apple smartphone or tablet, laptop, smart TV or even Alexa and similar smart speakers
Start listening right away and all day with a 2220mAh battery that can supply 12-18 hours of playback. Accessories include a USB C charging cable, a mini to mini connector, and a 2.5mm balanced interconnect so you can connect to most any audio system component or converter right out the box
3D Holographic + and XBass II offer advanced analogue signal processing circuits that provide a more accurate and enjoyable sound by correcting low end bass and/or mid range frequencies and widening the soundstage to bring the music 'out of your head' creating a more a engaging sound. Puts the performer on stage in your home to add that extra natural quality to the mid range
At the time of this posting, Our research indicates that this is $129.01 lower (43.1% savings) than the next best available prices from reputable merchants with prices starting from $299.
This seems overpriced when something like the Qudelix 5K exists ($109) and is actively being updated. For iPhone users, it provides a system-wide PEQ that is otherwise unavailable. The other upside is that the Qudelix app ties into AutoEQ for one touch settings from the AutoEQ project. I've been able to plug it into my iPhone 12 Pro Max and it is detected via USB connection. It's more than enough to power my Audeze LCD-2 Classics.
This amp produces reasonably good sound but be aware of two things:
1) the LiPo battery pack inside these units begins to degrade in battery life within 2 years of usage.
2) the Li-Po battery packs inside these units use a proprietary connector that makes it difficult to self-service.
3) The manufacturer offers replacement batteries but under the following conditions: You must ship your Xcan to them at YOUR expense. You must pay them approximately $40 for the battery and return shipping. They will NOT mail you the replacement battery to do the swap yourself.
4) The balanced headphone jack on the Xcan is a cheap module that lacks an anchor into the PCB. This means that it will break off from just light careful usage. Many complaints about this on Head-Fi.
Read up on this product on the official discussion thread on Head-Fi and also read over the negative reviews on Amazon. There are frequent complaints about the balanced jack breaking inside the Xcan. This is because the solder joints eventually fail and there's no through-PCB anchor to keep the jack secure.
Also review the lab tests for other iFi products at AudioScienceReview.com
Most of them don't test very well. It sort of a mixed bag.
Our community has rated this post as helpful. If you agree, why not thank
This amp produces reasonably good sound but be aware of two things:
1) the LiPo battery pack inside these units begins to degrade in battery life within 2 years of usage.
2) the Li-Po battery packs inside these units use a proprietary connector that makes it difficult to self-service.
3) The manufacturer offers replacement batteries but under the following conditions: You must ship your Xcan to them at YOUR expense. You must pay them approximately $40 for the battery and return shipping. They will NOT mail you the replacement battery to do the swap yourself.
4) The balanced headphone jack on the Xcan is a cheap module that lacks an anchor into the PCB. This means that it will break off from just light careful usage. Many complaints about this on Head-Fi.
Read up on this product on the official discussion thread on Head-Fi and also read over the negative reviews on Amazon. There are frequent complaints about the balanced jack breaking inside the Xcan. This is because the solder joints eventually fail and there's no through-PCB anchor to keep the jack secure.
Also review the lab tests for other iFi products at AudioScienceReview.com
Most of them don't test very well. It sort of a mixed bag.
8
2
1
Like
Helpful
Funny
Not helpful
Dec 9, 2021 9:13 AM
2.7K Comments
Joined Dec 2014
This comment has been rated as unhelpful by Slickdeals users.
Good deal for a killer Bluetooth portable amp. I used to have the ifi Micro and regretted getting rid of it. Excited to get a new iFi.
There are better options for Bluetooth amps. This one lacks LDAC support and I think it also lacks AptX HD. It only has the old basic AptX which is lossy.
When Topping dx3pro+ exist at $199, this should be cheaper.
Granted the use case is different, it is technology stuff that always gets cheaper over time.
Seems stupid without a wired connection. Though I'm kind of thinking this might be good for my long bike rides. My phone would be conveniently untethered from my earbuds. This could be in a coat pocket and tethered to wired buds. That all said the exta work might amount to a continous pain in the ass. I have some Shure 435 and 535 ear buds. I never figured out if these buds are a good fit to use with a headphone amplifier. If someone knows do tell.
An odd device and I'm into portable hifi. The use case is 2 completely different audiences - those that want better Bluetooth performance with really good headphones and those who will use their phone DAC and use the amp on this. Product planning really screwed up on this one.
1
1
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
Top Comments
1) the LiPo battery pack inside these units begins to degrade in battery life within 2 years of usage.
2) the Li-Po battery packs inside these units use a proprietary connector that makes it difficult to self-service.
3) The manufacturer offers replacement batteries but under the following conditions: You must ship your Xcan to them at YOUR expense. You must pay them approximately $40 for the battery and return shipping. They will NOT mail you the replacement battery to do the swap yourself.
4) The balanced headphone jack on the Xcan is a cheap module that lacks an anchor into the PCB. This means that it will break off from just light careful usage. Many complaints about this on Head-Fi.
Read up on this product on the official discussion thread on Head-Fi and also read over the negative reviews on Amazon. There are frequent complaints about the balanced jack breaking inside the Xcan. This is because the solder joints eventually fail and there's no through-PCB anchor to keep the jack secure.
Also review the lab tests for other iFi products at AudioScienceReview.com
Most of them don't test very well. It sort of a mixed bag.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
40 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
1) the LiPo battery pack inside these units begins to degrade in battery life within 2 years of usage.
2) the Li-Po battery packs inside these units use a proprietary connector that makes it difficult to self-service.
3) The manufacturer offers replacement batteries but under the following conditions: You must ship your Xcan to them at YOUR expense. You must pay them approximately $40 for the battery and return shipping. They will NOT mail you the replacement battery to do the swap yourself.
4) The balanced headphone jack on the Xcan is a cheap module that lacks an anchor into the PCB. This means that it will break off from just light careful usage. Many complaints about this on Head-Fi.
Read up on this product on the official discussion thread on Head-Fi and also read over the negative reviews on Amazon. There are frequent complaints about the balanced jack breaking inside the Xcan. This is because the solder joints eventually fail and there's no through-PCB anchor to keep the jack secure.
Also review the lab tests for other iFi products at AudioScienceReview.com
Most of them don't test very well. It sort of a mixed bag.
Too bad it was heavy that's why it wasn't portable enough for me.
Granted the use case is different, it is technology stuff that always gets cheaper over time.
Sign up for a Slickdeals account to remove this ad.
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!