Did this coupon
work for you?
work for you?
Sorry, this deal has expired.
Get notified of deals like this in the future.
Add Deal Alert for this Item
Frontpage
Ryobi 15-Amp 10" Sliding Compound Miter Saw w/ Cutline Indicator (Refurbished) Expired
$90
$169.99
+ $10 S/H
Direct Tools Outlet has Ryobi 15-Amp 10" Sliding Compound Miter Saw with LED Cutline Indicator (Refurbished, ZRTSS103) for $89.99. Shipping is a flat rate $9.99.
Thanks to Community Member JMBauer74 for finding this deal.
Includes:
Thanks to Community Member JMBauer74 for finding this deal.
Includes:
- ZRTSS103T Miter Saw with LED
- 40-Tooth Carbide-Tipped Blade
- Table Extensions
- Work Clamp
- Blade Wrench
- Dust Bag
- Operator's Manual
- 15 Amp, 4600 RPM motor with 12 in. Cross Cut Capacity
- Includes: 10 in. 40-Tooth Carbide Tipped Blade and Accessories
- LED Cutline Indicator provide improved cut accuracy
- Sliding head provides maximum capacity for up to 12 in. cross cut
- Miter stops located at the most common crown molding angles 0°, 15°, 22.5°, 31.6°, and 45° left and right for quick cut settings
- Miter Detent Override: Quick action lever bypasses miter detent index points with one simple motion
- Machined cast-in miter scale for accurate table alignment
- Electric brake stops the blade in seconds
- Spindle lock for easy single wrench blade changes
- Extended miter range from 47° left and right to accommodate a wide variety of cuts
- Fixed Dust Port maintains the ideal position to optimize dust collection efficiencies for both plunge and sliding cuts
- 1-1/4 in. dust port provides connection to standard dust collection systems to help keep work area clean
- Horizontal "D" handle for improved comfort
Original Post
Written by
Edited January 12, 2022
at 11:13 AM
RYOBI 15 Amp 10 In. Sliding Compound Miter Saw with LED Cutline Indicator (Factory Reconditioned) is $89.99 at Direct Tools Factory Outlet.
https://www.directtools
https://www.directtools
in
Saws & Chainsaws
(4)
If you purchase something through a post on our site, Slickdeals may get a small share of the sale.
84 Comments
Your comment cannot be blank.
Featured Comments
I looked up a couple of Youtube videos on how to calibrate a miter saw, bought a carpenter square on amazon for $8, and checked on the blade alignment. I found the miter 0 degree angle was perfect, but the bevel was a bit off. Thankfully they make both the miter angle and bevel angle easily adjusted, so after a few iterations of adjusting and checking I was able to get my saw nice and square.
Here's the video I ended up using to check the fence-to-blade alignment: https://www.youtube.com/watch?v=aB-QJ1B6toY
Although it did take a bit of extra work to get the saw set up, I think it was an excellent deal and I've already used it to build the Ana White garage shelves and used the sliding feature to cut a 10" wide shelf to length for the laundry room. The LED blade shadow feature is really cool, and I found it to be accurate. I will say the dust extraction port is pretty much useless, so you may want to do your cutting outside to avoid getting sawdust everywhere, as it ejects a lot of dust at high speed. I haven't tried cutting any bevels or non-90 degree angles yet, so I don't yet know how accurate the detents are.
It survived ok, guess it is a well built saw.
Sign up for a Slickdeals account to remove this ad.
When you slide the handle down.. you don't see the line on the wood or whatever you're cutting?
Sign up for a Slickdeals account to remove this ad.