expired Posted by TattyBear | Staff • May 13, 2022
May 13, 2022 5:29 PM
Item 1 of 5
Item 1 of 5
expired Posted by TattyBear | Staff • May 13, 2022
May 13, 2022 5:29 PM
Monoprice Workstream Sit/Stand Desk Frame w/ Dual Motor Height Adjustment
+ SD Cashback + Free Shipping$200
$300
33% offMonoprice
Visit MonopriceGood Deal
Bad Deal
Save
Share
Leave a Comment
Top Comments
Even after one year my table top looked like it just came in.
You can watch a few YouTube videos if you want to see how to execute.
I used my garage, you should use some open area like a garage, but make sure it's not very dusty.
I borrowed saw horse from my friend, otherwise you can get two saw horses the foldable one from HD or Lowes.
Now, first step.
Use 150 grid sand paper to sand.
The butcher block comes one side with few imperfections and one side smooth. Use the sand paper to sand both sides to remove any small scratches, dents and other imperfections. I did good amount of sanding to make it really smooth. Though the butcher block comes in very good condition.
Note: as soon as you remove the packaging make sure to start working on it like staining and sealing within 48 hours. Because it comes sealed and if just keep it outside, then the wood will absorb all the surrounding moisture and may wraps.
1. Apply pre-stain wood conditioner. This may seems optional but, it's really help stain to spread and stick to the wood evenly.
I used this from Lowes you can go to Lowes and HD doesn't really matter and can pick any brand.
https://www.lowes.com/pd/Minwax-8.../999913771
2. Then, you can use stain color based on how dark, or light or natural wood color you want.
I used the below oil based stain.
But, I guess I select walnut color.
You can use brush, but I use the old rag clothes.
Basically you can use any cloth old cotton tees usually perfect which are lint free.
Also you just apply two to three coats.
Allow three to four hours to dry between the coats.
https://www.lowes.com/pd/Minwax-W.../999914241
3. Then, finally seal the butcher block that's very, very important.
Since I went with a bit of a shiny and glossy look I used semi-gloss polyurethane.
https://www.lowes.com/pd/Minwax-3.../999913667
You don't have to get a gallon size, just small size cans are enough.
I applied three coats of polyurethane.
I used fast dry so I don't have to wait long before applying the next coat.
Finally I kept it in the garage for 24 hours so that all the oil based stain and polyurethane smell will go away.
All the products are for your reference you can use any brand from HD and Lowe's
I used Minwax brand
Hope this helps.
At the same time I ordered Acacia 60"x30" butcher block from Lowes.
I spend two days for preparing butcher block by staining, sealing and finally used semi-gloss poly and it turned perfect, then assemble this desk with top butcher block.
Since that day onwards, I have received so many compliments and requests from family and friends to make one of them. Total cost $250+$165+$30 = $450 I have perfect size sit-stand workstation which I have been using day in day out. I usually adjust two to three times a day typically. The dual motor is very smooth and very silent. Set up with three different memory at different hights.
For this price its a steal.
Because I have seen the size and daul motor sit-stand desk cost anywhere from $800-$1200 which I have currently now.
121 Comments
Sign up for a Slickdeals account to remove this ad.
https://www.ikea.com/us/en/cat/table-tops-11844/
Sign up for a Slickdeals account to remove this ad.
Sign up for a Slickdeals account to remove this ad.
Leave a Comment