expiredTheTorq posted Jun 06, 2022 04:11 PM
Item 1 of 1
expiredTheTorq posted Jun 06, 2022 04:11 PM
LAUNCH CRT5011E OBD2 Scanner and TPMS Programmer $145
$145
Amazon
Visit AmazonGood Deal
Bad Deal
Save
Share
|
Quote
:
CRT5011E has 5 modes to program Launch LTR01 Sensors and Other Unencrypted Sensors:Auto Create: This function is designed to program the LAUNCH-sensor by applying random IDs created according to the test vehicle when it is unable to obtain the original sensor ID. Select the wheel which needs to be programmed on the tool, place a LAUNCH-sensor close to the TPMS antenna of the tool, and select CREATE SENSOR to create a new random sensor ID. Manual Create: This function allows users to manually enter sensor ID. Users can enter the random ID or the original sensor ID, if it is available. Copy ID by activation: It can get tire pressure sensor ID when the tire sensor is working normally, you can write in the retrieved original sensor data to the LAUNCH-sensor. It is used after the original sensor is triggered. Copy by OBD: Firstly, you need to perform a Read ID from Vehicle in the Relearn function, which reads the sensor ID from the vehicle ECU. It can be used if the sensor is damaged and the original ID is saved in the vehicle system. You can use it to get the old sensor ID stored in ECU, and write it directly into your LAUNCH RF-sensor. Create Multi-sensor 1-8: This function allows users to program multiple sensors simultaneously. Up to 8 sensors can be programmed at the same time. |
|
Quote
:
CRT5011E has 5 modes to program Launch LTR01 Sensors and Other Unencrypted Sensors:Auto Create: This function is designed to program the LAUNCH-sensor by applying random IDs created according to the test vehicle when it is unable to obtain the original sensor ID. Select the wheel which needs to be programmed on the tool, place a LAUNCH-sensor close to the TPMS antenna of the tool, and select CREATE SENSOR to create a new random sensor ID. Manual Create: This function allows users to manually enter sensor ID. Users can enter the random ID or the original sensor ID, if it is available. Copy ID by activation: It can get tire pressure sensor ID when the tire sensor is working normally, you can write in the retrieved original sensor data to the LAUNCH-sensor. It is used after the original sensor is triggered. Copy by OBD: Firstly, you need to perform a Read ID from Vehicle in the Relearn function, which reads the sensor ID from the vehicle ECU. It can be used if the sensor is damaged and the original ID is saved in the vehicle system. You can use it to get the old sensor ID stored in ECU, and write it directly into your LAUNCH RF-sensor. Create Multi-sensor 1-8: This function allows users to program multiple sensors simultaneously. Up to 8 sensors can be programmed at the same time. |
Leave a Comment
0 Comments
Leave a Comment