The Stride is a commuter style class 2 E-Bike that has both throttle and pedal assist, top speed of 20 MPH and 40 mile range.
The Groove is a foldable fat tire bike that can go a little more off-road riding and can fold into a trunk and has a 45 mile range, also class 2 with 20 MPH max speed.
Bafang motors are considered more reliable hub motors and the li-ion battery packs are CL certified.
About this deal:
Refer to the forum thread for additional information & offer discussion.
No longer available:
Also available, GEN3Ride.com has their GEN3 The Groove 500W Folding Fat Tire E-Bike for $1199 - $300 w/ coupon code SUMMER = $899. Shipping is free.
Note: Currently out of stock. more to become available by September 30, 2022.
This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
The Stride is a commuter style class 2 E-Bike that has both throttle and pedal assist, top speed of 20 MPH and 40 mile range.
The Groove is a foldable fat tire bike that can go a little more off-road riding and can fold into a trunk and has a 45 mile range, also class 2 with 20 MPH max speed.
Bafang motors are considered more reliable hub motors and the li-ion battery packs are CL certified.
About this deal:
Refer to the forum thread for additional information & offer discussion.
No longer available:
Also available, GEN3Ride.com has their GEN3 The Groove 500W Folding Fat Tire E-Bike for $1199 - $300 w/ coupon code SUMMER = $899. Shipping is free.
Note: Currently out of stock. more to become available by September 30, 2022.
It seems that staff has taken over the edits since this went front page. Soo here is my update in comments:
Package arrived today 7/5 via FedEx
It took me about 35 minutes to assemble (I am experienced so take that into account)
*One odd issue was the derailleur protector needed to be bent outwards to allow the bike to shift into lower gears. There was a tag zip-tied to the derailleur to let you know that this step might need to be done.
*Another tip, the disc brakes cable needed to be tightened to create a better stopping power with less effort. There was no warping of rotors or any issues with brakes.
The build quality and parts were much better than I had anticipated for a $900 e-bike considering the price for a replacement battery is $350, they did a good job with the other parts to keep the price down. I was pleasantly surprised to see the Bafang motor which are high quality motors specified as well as the entry level Shimano shifter.
I had test ridden a friend's similar model (KBO Breeze) to the Stride but with a 750W motor and 50miles range, the motor was almost too powerful and the bike was heavier making it a bit unwieldy at first, I like how the 500w on the Stride doesn't make you feel unsafe as you take-off, the 750w was a bit extreme. This is our first e-bike so the 20 mph top end seemed like a good place to start. My son an my wife both tested the bike after I safety checked it and both commented on how much they liked it and it was great to se a big smile on my wife's face as she returned to the driveway after her test ride of her new bike.
In Summary, at $900 I believe there are not many options in the market that will come close to the value of this bike. I am very exited that my wife will now be more willing to ride with the family when we go on bike cruises. She was reluctant to go as we (me and the boys) were 'too fast' and always felt like she was holding us up. Now we will probably be the ones holding her up
About me: I have 13 bikes at my house between my wife and children. I have been working on bikes for about 15 years as a hobby, and necessity, with my small fleet of bikes. I have bikes ranging from about $450-$5600 (Ibis Ripmo Carbon Fox Factory).
FedEx delivered the Groove today. It was packaged well (tons of foam) and there was no damage. There is some sort of adhesive on the upper rear frame I need to clean off. Assembly was straightforward. The only thing that need adjustment was the stem alignment with the front wheel. I squared it up as well as I could, but the front tire seems to be slightly out of alignment with the midpoint of the frame. Will I return it for that? Probably not, but it is a QA/QC issue I see with lower end bicycles. It's probably much more noticeable on a fat tire bike. Here are my initial impressions after the first ride.
I rode the bike 11 miles with what I think was a fully charged battery (three bars on the indicator). The terrain was a mixture of paved bike trails, hard pack rutted out off road trails, and streets. There were some hills that nearly give me a heart attack on a regular pedal bike, not that I'm in good shape anymore following the COVID weight gain.
Motor: Lots of torque. I'm no expert with e-bikes, but was impressed with the torque off the line and up hills. I've seen others upgrade the motor, but I think this is adequate. I don't see spending another $300-400 for a few more MPH (previous posted in the thread is helpful for this point too). The only disappointment I had was it couldn't throttle me up a steep section of a trail. It's a very difficult section on a pedal bike geared down, so I'm not surprised it struggled.
Fork: Adequate, but not for off road at all. I bottomed it out terribly on the hard pack trails. It will take some minor excursions on trails if you keep it under 10-12 MPH. Anything over that and it bottoms harshly. I honestly think I broke the suspension already doing 15-20 MPH on the trails.
Brakes: Awful, just awful. I followed the break in procedure and even cleaned the rotors with brake cleaner prior to riding. I'll adjust and reassess. I might also soft wheel the rotors with a die grinder and file the pads slightly if I see any glossy areas. This is a cheap upgrade if needed. The motor's speed ability is more than the brakes can handle. That's always a nightmare on a motorcycle.
Handling: This bike has a very very light front end. On the trails, I could easily pop the front tire up going over any sort of bumps or rises in the trail (not what I'd call a jump) . There are two things I will point out with this observation. One, it wheelies easier and two, it under steers. The under steer worries me on trails and it will only be worse with a rear rack installed and loaded up. On the road, its less of an issue, but it won't like a quick turn on a wet road. This handling characteristic makes sense as the bike is long and the battery and motor sit behind the bottom bracket. The Lectric XP 2.0, based on its in frame battery, likely handles more balanced. If you watch the review of a rider taking this on the mountain bike trails, I believe the challenge the rider faced was more due to the light front end than the width of the handle bars and fat tires.
Tires: Noisy as hell on pavement. I'll get slicks if I plan to commute on this bike. Decent traction off road.
Battery Life: I throttled up and down hills, PAS 5, and generally hammered on it, and returned with the display showing full battery. The on battery indicator showed two bars. I think a reasonable commute would be doable on this range without breaking a sweat.
Fit and Finish: The seat is a better stock seat than most cheaper pedal bikes I've ridden. Upgrades are a plenty. Handle bar position is pretty high for trail riding, but otherwise okay. That's just how most of these fold up bikes seem to be designed. The one nasty thing I noticed was the handle bar rocks a little bit in the top clamp. It's a fold up, so its not going to be as firmly mounted as a bolted down stem clamp. The pedals are decent BMX style metal pedals. The controls are easy to use, although the display is very basic. The brake levers seem okay, and have nice rubber inserts. The derailleur worked okay, but I noticed some racket while riding. I think the guard is pushed up against it. Nothing pliers can't fix. It shifted through the gears okay, but I only used 6 and 7 for the entire ride. The motor has the typical RC car sound, but I don't have much to compared against. I think the front chain ring is too small for a faster commute. Once you are up to 18 MPH and PAS 4 or 5, you are racing to keep the pedals turning fast enough to match the assist. The last item I'll mention is the motor controller location. It is not water resistant at all. I do not recommend riding in the rain or even through a minor puddle. The electronics will get wet. This is the biggest design flaw I noticed. The in frame battery bikes are likely much better suited for wet weather and puddles.
Would I recommend, yes, but consider what is important to you. It's a good a multipurpose bike without a major strength or weakness.
The motor controller is at the bottom end of the battery compartment. There are two small screws that hold the black plastic part that houses the contacts. Remove the screws and carefully pull the wiring out. You'll see the motor controller stuffed in there and you'll need to pull that out carefully as it's connected to the wiring harness on the side closer to the bottom bracket. Once you pull the motor controller out get enough, you can access the yellow and green cable to disconnect without needing to disconnect any other wires. You'll need to push the harness back into the tube along with the motor controller being mindful to not pinch the cables out damage the charge port. Place the black plastic part with the contacts and fasten with the screws. Note that one screw is a wood screw style thread and the other is a machine screw. Test all the functions after reassembly (charging and power on/off).
In case someone hasn't mentioned it in the 50 pages of comments. Apparently these bikes can be adjusted to go faster than 20mph. There's a wire you need to disconnect. I found this out in the Gen3 users group on Facebag. Haven't actually tried it yet though.
Do you have a link or other info on the wire to disconnect? I tried the WALLKE video instructions, the Stride dose not have wires in the same place.
Like
Helpful
Funny
Not helpful
Jul 19, 2022 3:50 PM
10.7K Comments
Joined Nov 2006
This comment has been rated as unhelpful by Slickdeals users.
Has anyone had any luck with support? Received gen3 Groove on 7/7 with a bent / out of alignment front fork so unable to install front wheel. Submitted a ticket 7/9 and still waiting to hear back. Also if you had a similar issue and was able to fix it, I'd appreciate if you could share how you resolved it.
Add one additional person receiving the Groove with the same issue.
I'm not sure where to post this but I have a question or two. I bought online 2 Gen3 Groove bikes, the first one assembled easy. The 2nd one, upon opening the box had some scratches (no big deal) but the front fork is warped or bent, no way will the wheel go on both front forks and brake caliper. I took a level to measure it and it is off, not parallel or straight as the first one was so it is not my imagination. IDK if they shipped me a used unit or damaged in shipping. I get mistakes happen but I've been emailing and calling their support since last week-NO ANSWER-I posted on their FB page and they deleted my post but no support answer.
Is there a way to get a hold of them (they are based in Washington)-their outgoing message say they will get back to you in 1-2 days-been over that-has anyone dealt with them?
Or is there some way to fix the front fork myself? Some tool I'm not aware of to bend it into shape? Will any bike shop do it even if they did not sell me the bike?
So at this point based on numerous complaints of the same problem, the company must have known and still selling manufacturer defect bikes? What a horrible company!
lol once again this bike cant do 24 mph unless you are going down hill and you weigh 100 lbs
The problem is it prevents you from going 24mph even if you are going to downhill and weigh 100 lbs. And for what it's worth it's pretty easy to get it to 20mph even if you're 190lbs, so my guess is it'll easily go faster than 20mph, particularly if you're pedaling.
lol once again this bike cant do 24 mph unless you are going down hill and you weigh 100 lbs
While gravity is same all over the planet, a heavier person would go downhill faster, because of air resistance. Try throwing a feather down from height to understand the basic concept.
How did you manage to pull out the derailleur protector out? Its so strong, did you guys remove it from the bike, pull it out and then assemble it back?
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
How did you manage to pull out the derailleur protector out? Its so strong, did you guys remove it from the bike, pull it out and then assemble it back?
At about the 2:00 in this video, the guy uses a crescent wrench to get enough leverage to bend the derailleur guard back out so that it doesn't interfere with changing to higher gears. [Different bike, but same issue and derailleur setup]
I've been in IT for the past 20 years, but before that when I worked in sales, I took a sales class and learned that a happy customer might tell one or two people about their experience, but an angry customer will tell everyone and their brother. Lol.
So my guess is thousands of people got good bikes from GEN3, and the 3-5% with issues all come to Slickdeals to talk about the bad experiences. I don't blame people for getting upset, and most of the time there are good reasons to complain.
As a new customer and a first time E-Bike owner I hope GEN3 can fix their customer service problems and fast. The only issue I had so far was a flat tire due to a manufacturer defect, but it was a simple tube replacement. Otherwise my wife is really happy with her new bike.
While gravity is same all over the planet, a heavier person would go downhill faster, because of air resistance. Try throwing a feather down from height to understand the basic concept.
LOL. It's been a while since I studied physics, but I do recall that gravity affects all bodies the same way, regardless of mass. So a heavier person would go downhill at the same speed as a lighter person (though there might be a very small effect of air resistance which in this case would slow the larger, heavier person). The feather issue is entirely another matter and unrelated to this issue.
Not sure if this gen3 is better, but after owning a core 5 for a year, I would never buy anything from ride1up. Too many things broke and customer service was super slow. I spent more time waiting for parts then enjoying the ebike. Only thing they really get going for them is the motors are very well built and can handle some power.
My experience was opposite. I had noisy motor so the sent me a new one and it came pretty fast. Was with me the whole way and was willing to pay for LBS to install but unfortunately most LBS wont do the work cuz they don't like working on aftermarket brands
Like
Helpful
Funny
Not helpful
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
Top Comments
Package arrived today 7/5 via FedEx
It took me about 35 minutes to assemble (I am experienced so take that into account)
*One odd issue was the derailleur protector needed to be bent outwards to allow the bike to shift into lower gears. There was a tag zip-tied to the derailleur to let you know that this step might need to be done.
*Another tip, the disc brakes cable needed to be tightened to create a better stopping power with less effort. There was no warping of rotors or any issues with brakes.
The build quality and parts were much better than I had anticipated for a $900 e-bike considering the price for a replacement battery is $350, they did a good job with the other parts to keep the price down. I was pleasantly surprised to see the Bafang motor which are high quality motors specified as well as the entry level Shimano shifter.
I had test ridden a friend's similar model (KBO Breeze) to the Stride but with a 750W motor and 50miles range, the motor was almost too powerful and the bike was heavier making it a bit unwieldy at first, I like how the 500w on the Stride doesn't make you feel unsafe as you take-off, the 750w was a bit extreme. This is our first e-bike so the 20 mph top end seemed like a good place to start. My son an my wife both tested the bike after I safety checked it and both commented on how much they liked it and it was great to se a big smile on my wife's face as she returned to the driveway after her test ride of her new bike.
KBO Breeze for comparison: https://kbobike.com/products/step...uting-bike
In Summary, at $900 I believe there are not many options in the market that will come close to the value of this bike. I am very exited that my wife will now be more willing to ride with the family when we go on bike cruises. She was reluctant to go as we (me and the boys) were 'too fast' and always felt like she was holding us up. Now we will probably be the ones holding her up
About me: I have 13 bikes at my house between my wife and children. I have been working on bikes for about 15 years as a hobby, and necessity, with my small fleet of bikes. I have bikes ranging from about $450-$5600 (Ibis Ripmo Carbon Fox Factory).
I rode the bike 11 miles with what I think was a fully charged battery (three bars on the indicator). The terrain was a mixture of paved bike trails, hard pack rutted out off road trails, and streets. There were some hills that nearly give me a heart attack on a regular pedal bike, not that I'm in good shape anymore following the COVID weight gain.
Motor: Lots of torque. I'm no expert with e-bikes, but was impressed with the torque off the line and up hills. I've seen others upgrade the motor, but I think this is adequate. I don't see spending another $300-400 for a few more MPH (previous posted in the thread is helpful for this point too). The only disappointment I had was it couldn't throttle me up a steep section of a trail. It's a very difficult section on a pedal bike geared down, so I'm not surprised it struggled.
Fork: Adequate, but not for off road at all. I bottomed it out terribly on the hard pack trails. It will take some minor excursions on trails if you keep it under 10-12 MPH. Anything over that and it bottoms harshly. I honestly think I broke the suspension already doing 15-20 MPH on the trails.
Brakes: Awful, just awful. I followed the break in procedure and even cleaned the rotors with brake cleaner prior to riding. I'll adjust and reassess. I might also soft wheel the rotors with a die grinder and file the pads slightly if I see any glossy areas. This is a cheap upgrade if needed. The motor's speed ability is more than the brakes can handle. That's always a nightmare on a motorcycle.
Handling: This bike has a very very light front end. On the trails, I could easily pop the front tire up going over any sort of bumps or rises in the trail (not what I'd call a jump) . There are two things I will point out with this observation. One, it wheelies easier and two, it under steers. The under steer worries me on trails and it will only be worse with a rear rack installed and loaded up. On the road, its less of an issue, but it won't like a quick turn on a wet road. This handling characteristic makes sense as the bike is long and the battery and motor sit behind the bottom bracket. The Lectric XP 2.0, based on its in frame battery, likely handles more balanced. If you watch the review of a rider taking this on the mountain bike trails, I believe the challenge the rider faced was more due to the light front end than the width of the handle bars and fat tires.
Tires: Noisy as hell on pavement. I'll get slicks if I plan to commute on this bike. Decent traction off road.
Battery Life: I throttled up and down hills, PAS 5, and generally hammered on it, and returned with the display showing full battery. The on battery indicator showed two bars. I think a reasonable commute would be doable on this range without breaking a sweat.
Fit and Finish: The seat is a better stock seat than most cheaper pedal bikes I've ridden. Upgrades are a plenty. Handle bar position is pretty high for trail riding, but otherwise okay. That's just how most of these fold up bikes seem to be designed. The one nasty thing I noticed was the handle bar rocks a little bit in the top clamp. It's a fold up, so its not going to be as firmly mounted as a bolted down stem clamp. The pedals are decent BMX style metal pedals. The controls are easy to use, although the display is very basic. The brake levers seem okay, and have nice rubber inserts. The derailleur worked okay, but I noticed some racket while riding. I think the guard is pushed up against it. Nothing pliers can't fix. It shifted through the gears okay, but I only used 6 and 7 for the entire ride. The motor has the typical RC car sound, but I don't have much to compared against. I think the front chain ring is too small for a faster commute. Once you are up to 18 MPH and PAS 4 or 5, you are racing to keep the pedals turning fast enough to match the assist. The last item I'll mention is the motor controller location. It is not water resistant at all. I do not recommend riding in the rain or even through a minor puddle. The electronics will get wet. This is the biggest design flaw I noticed. The in frame battery bikes are likely much better suited for wet weather and puddles.
Would I recommend, yes, but consider what is important to you. It's a good a multipurpose bike without a major strength or weakness.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
1.1K Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
I'm not sure where to post this but I have a question or two. I bought online 2 Gen3 Groove bikes, the first one assembled easy. The 2nd one, upon opening the box had some scratches (no big deal) but the front fork is warped or bent, no way will the wheel go on both front forks and brake caliper. I took a level to measure it and it is off, not parallel or straight as the first one was so it is not my imagination. IDK if they shipped me a used unit or damaged in shipping. I get mistakes happen but I've been emailing and calling their support since last week-NO ANSWER-I posted on their FB page and they deleted my post but no support answer.
Is there a way to get a hold of them (they are based in Washington)-their outgoing message say they will get back to you in 1-2 days-been over that-has anyone dealt with them?
Or is there some way to fix the front fork myself? Some tool I'm not aware of to bend it into shape? Will any bike shop do it even if they did not sell me the bike?
So at this point based on numerous complaints of the same problem, the company must have known and still selling manufacturer defect bikes? What a horrible company!
Sign up for a Slickdeals account to remove this ad.
Can you please explain what exactly you did??
https://youtu.be/Liw_o_qAj3o
I had the same problem (couldn't shift into 7th gear), and this fix worked.
Our community has rated this post as helpful. If you agree, why not thank
So my guess is thousands of people got good bikes from GEN3, and the 3-5% with issues all come to Slickdeals to talk about the bad experiences. I don't blame people for getting upset, and most of the time there are good reasons to complain.
As a new customer and a first time E-Bike owner I hope GEN3 can fix their customer service problems and fast. The only issue I had so far was a flat tire due to a manufacturer defect, but it was a simple tube replacement. Otherwise my wife is really happy with her new bike.
Alas, let the complaining continue, lol...
https://www.youtube.com/watch?v=YcdOqaZ
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!