frontpage Posted by iconian | Staff • Oct 3, 2022
Oct 3, 2022 10:16 PM
Item 1 of 5
Item 1 of 5
frontpage Posted by iconian | Staff • Oct 3, 2022
Oct 3, 2022 10:16 PM
Kreg Hardware Installation Kit with Jigs & Two 3" Face Clamps
+ Free Shipping$60
$80
25% offFocus Camera
Get Deal at Focus CameraGood Deal
Bad Deal
Save
Share
Leave a Comment
Top Comments
If you don't think this is worth $60, then don't buy it. But that doesn't mean the company is greedy.
And FWIW, I personally don't think this is worth $60 either. But I also don't install cabinets for a living, so I'm not going to judge the people that do.
I am not a wood worker and have no ambitions to become one, I am an ex-mechanic working in IT. I'd rather play with servers and raspberry pies.
I have the Slickdeal Rigid job-site table-saw for my cabinet building and often don't wear my readers when making measurements.
I have all the parts in this kit except the pocket hole jig (because I'm scared Mathias Wandel will get me) , bought separately several years ago.
I used them for building and installing 20 3/4 inch melamine cabinets in the garage.
they worked flawlessly for that.
Sold the house and bought one with old hinges and no drawer pulls on a single cabinet.
Had to replace the bit in the concealed hinge jig but have been slowly painting and converting all the cabinets over to soft close hinges and adding door handles and drawer pulls.
These have been incredible in allowing me to get things done easily, accurately and consistently.
Hinges go on easily and work great.
Handles all end up aligned and straight, even centered in the front of the drawer!
I recommend a second clamping plier.
I also highly recommend using a story pole for the cabinets(see above remark about measuring).
I'm voting thumbs up because i believe it is a good deal for tools that help those like me that are not wood workers..
never mind
In the box:
1x Concealed Hinge Jig
1x Kreg Cabinet Hardware Jig
1x Kreg Pocket-Hole Jig 310
2x Classic 3" Face Clamps
25 Comments
Sign up for a Slickdeals account to remove this ad.
https://www.woodcraft.c
https://www.woodcraft.c
I get $12 s/h also, so it's actually $17 cheaper
—rag
Our community has rated this post as helpful. If you agree, why not thank vid1900
—rag
—rag
I have seen STLs for a drawer slide alignment jig but never used it. The kreg slide jig isn't in the bundle above.
The bundle above is like the worst kreg pocket hole jig they make. You won't find a decent pocket hole jig STL either, it should have metal bushings inside for longevity. So regardless you need a better one than the one in this bundle. I have an older model with two holes and I've done lots of things with it.
This bundle is pretty weird. You are really buying a few jigs and clamps with Kregs name. I keep eyeballing the clamps but I've made due with a 6" Irwin clamp just fine this far. So it's hard to justify buying more kreg pieces.
Sign up for a Slickdeals account to remove this ad.
I've used regular bar clamps for years on my Kreg pocket hole jig, but the Kreg clamps are much easier to use, especially when you need to drill a lot of holes in the same thickness material.
i have one and yes, i 3d printed jig to help me install those 4 inches handles onto cabinets for easy centering and guide
Looking for the opposite end of the bat 💩 crazy scale, see Woodpeckers.
People love their YouTubers , and YouTubers love that $$$ and free stuff.
😆
If you don't think this is worth $60, then don't buy it. But that doesn't mean the company is greedy.
And FWIW, I personally don't think this is worth $60 either. But I also don't install cabinets for a living, so I'm not going to judge the people that do.
If you don't think this is worth $60, then don't buy it. But that doesn't mean the company is greedy.
And FWIW, I personally don't think this is worth $60 either. But I also don't install cabinets for a living, so I'm not going to judge the people that do.
Sign up for a Slickdeals account to remove this ad.
—rag
Leave a Comment