expired Posted by CorNut • Nov 27, 2022
Nov 27, 2022 4:32 PM
Item 1 of 6
Item 1 of 6
expired Posted by CorNut • Nov 27, 2022
Nov 27, 2022 4:32 PM
Makita SP6000J1 6-1/2" Plunge Circular Saw Track Saw Kit w/ Case + 55" Guide Rail
+ Free Shipping$352
$774
54% offAmazon
Visit AmazonGood Deal
Bad Deal
Save
Share
Leave a Comment
Top Comments
Track saws have fantastic dust collection, if you're running a hose for dust collection it's no extra work to be using a corded version, especially since you can plug the cable into a dust extractor which will automatically turn on when you turn on the track saw.
Basically there are no downsides to a corded version and there are huge upsides like not having to worry about batteries decaying over the years
69 Comments
Sign up for a Slickdeals account to remove this ad.
my total was 367.83
What I did need is the 40v duster... my gawsh that thing is awesome. It's worth getting into the XGT 40V alone! Lol
In my shop I use a full size dust collector which I have above my tables. So the hose feeds and retracts.
Now, I'm limited by space, and Flaccid Paralysis in my left arm/leg. So I make things that function great for my limitations. So I figure, if I can use them, it would definitely benefit others with both arms/legs.
Manually handling a hose and power cord is fine... I just don't handle either, even if I had two arms I'd avoid it by creating something.
The hose/cord hanging off the end/edge always seem to catch. Even with the 3d printed ramps people sell on Etsy lol.
So, if a 0erson just has a shop vac, and hasn't spent a large amount on a dust extractor, then odds are, they're going to need to focus on other things staying clear and turning them on/off.
As far as batteries go, they're really inexpensive if you buy the clones. And yeah, you get a out 1 or 2 hard use years out of them. But it makes life do much easier. Especially if you don't have a $600+ extractor. And if outlets aren't available.
So, the nonsensical aspect... sure. I've had more concussions than than most NFL starting lineups... so, i can be a bit nonsensical. Ill give you that.
But I'm trying to offer advice on a larger scale. And I'm not assuming everyone has a $600+ extractor with AWS or another auto-start feature. L
Also, I definitely wouldn't consider a brushed, corded tool an upside... especially not a "Huge upside". The only downside on a cordless would be battery cost, and possible, weight. But it's been decades since I heard anyone say a corded hand tool is the better choice... especially with one that is designed for mobility, and clean space environments.
But hey... do you bro.
I do agree that the cordless is more convenient sometimes especially when you have to bring the saw to the store or jobsite where you don't have a power source, but believe me, this cord track saw will make 90% of people happy.
Just my 2 cents.
Sign up for a Slickdeals account to remove this ad.
Probably comparing apple to oranges, but would that the worth it over this? Just cuz of cordless, slightly cheaper overall, etcs.
2. I researched the hell out of track saws and came to this. Be aware that Makita makes track/guide compatible circular saws, that are kinda the best of both worlds (for example XSH08 18v version). You get 7 1/4" depth of cut, more power, ability to lock depth, blade guard, etc, but a base that can ride on guides/track just like a 6 1/2" track saw.
3. You can also adapt just about any circular saw to use track/guides. There are several options from Kreg, and multiple adapters from Makita (ie 198673-2) that use their track. This allows you to get into the track saw world for WAY cheaper, and with much more flexibility (ie. large saws, small saws, top handle, rear handle, blade left, blade right, corded, 18v, 36v, 40v, maybe even light metal???)
In the end, I decided not to get a dedicated track saw. Might be a great option for a cabinet maker with a small shop and no panel saw with limited space where a table saw isn't feasible, or a contractor who wants ultimate portability without fussing around with clunky adapters....but even then, I think the guide compatible circular saws are better all around for these use cases.....and for most people, multiple circular saws that can be adapted to track guides if needed are best. In the end, track saws are just way, way, way too expensive for what they are. I really don't get why they have to be so insanely expensive vs their very similar circular saw brethren.
Sooooo, if you missed this "deal", I wouldn't worry about it too much. Look at the XSH08, Makita adapters, or Kreg options (ACS table, accu-cut jigs, etc.) or Festool MFT table (similar to Kreg)
Sign up for a Slickdeals account to remove this ad.
2. I researched the hell out of track saws and came to this. Be aware that Makita makes track/guide compatible circular saws, that are kinda the best of both worlds (for example XSH08 18v version). You get 7 1/4" depth of cut, more power, ability to lock depth, blade guard, etc, but a base that can ride on guides/track just like a 6 1/2" track saw.
3. You can also adapt just about any circular saw to use track/guides. There are several options from Kreg, and multiple adapters from Makita (ie 198673-2) that use their track. This allows you to get into the track saw world for WAY cheaper, and with much more flexibility (ie. large saws, small saws, top handle, rear handle, blade left, blade right, corded, 18v, 36v, 40v, maybe even light metal???)
In the end, I decided not to get a dedicated track saw. Might be a great option for a cabinet maker with a small shop and no panel saw with limited space where a table saw isn't feasible, or a contractor who wants ultimate portability without fussing around with clunky adapters....but even then, I think the guide compatible circular saws are better all around for these use cases.....and for most people, multiple circular saws that can be adapted to track guides if needed are best. In the end, track saws are just way, way, way too expensive for what they are. I really don't get why they have to be so insanely expensive vs their very similar circular saw brethren.
Sooooo, if you missed this "deal", I wouldn't worry about it too much. Look at the XSH08, Makita adapters, or Kreg options (ACS table, accu-cut jigs, etc.) or Festool MFT table (similar to Kreg)
https://www.amazon.com/TRACK-SAW-...97e41410bb
I'm leaning toward getting this kit because I own a nice Dewalt DCS578 60V Flexvolt circular saw that I'd miss a whole lot by going with a non-brushless corded version.
Leave a Comment