Lighted end shows power is on and cord is ready to use. 15 Amps, 125 Volts, 1875 Watts. Limited lifetime warranty. Southwire 50-ft 12 / 3-Prong Outdoor Sjtw Heavy Duty Lighted Extension Cord | 2548SWUSA1LREC
Product SKU:
5013205085_5013205085
UPC:
32886296253
Community Notes
This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
I'm an electrical engineer. My advice is neither wrong, nor dangerous, but you did misread it. If he is charging a 12V battery and delivering 40A to the battery, the absolute maximum POWER that is being delivered to the battery is about 600 watts. The battery charger itself is not 100% efficient, if we assume it's 50% efficient worst case (and that strikes me as particularly bad) then the maximum instantaneous dissipation is 1200W (half in the charger, and half delivered to the battery). This assumes 100% of the power is coming from the wall, which may not be the case, since the 40A is in "starter mode", and likely had stored some energy in the charger.
So the question is how much current will be pulled through the extension cord. If you dissipate 1200W at 120V, that's 10 amps going through the extension cord (assuming a power factor of 1, I hope this is mostly reasonable), which gives you pretty good margin on the15A limit. It's also worth pointing out that "starting mode" means inherently that you aren't running it for more than a few seconds. If 12 gauge wire is rated for 15A , that almost certainly means continuously (12 gauge NM Romex would typically be rated for 20A continuous)... So, even if you exceeded 15A for a few seconds, it's a non-issue since heat takes a while to build up. It's pretty common for 120V welders to exceed 15A when the arc is first being struck, and it generally doesn't matter, the breakers don't even notice. In other words, there's a huge amount of margin.
What's more, most 120V single phase house wiring in the US is 12 or 14 gauge which is rated for 20A or 15A respectively, and tied to a 20A or 15A breaker respectively. So, it'd be really odd to manufacture a battery charger that exceeds 15A over more than a second or two since many breakers would be unhappy with it.
this will power your space heater just fine. 12/3 is capable of 15amps. the reason they say not to use extension cords is people will plug a 2k watt space heater into a christmas grandma special extension cord and wonder why it burned down.
I have had this exact 100' cord for 3 1/2 years for electric lawn equipment. It has started to split in a few places where the inner wires (coated) have begun to stick out of the main covering. I continue to use it but was looking for a replacement.
I used to roll it up on a wheel but learned that wasn't a good way to store it and have use the recommended way for the last 1 plus years. Hoping that this recommended way keeps the next cord in better shape longer.
I added the 50ft to cart for 25. The price ofvthe item jumped to 75. I was able still checkout for 25.00 x 2.
I really wanted 25ft but I will take 50 for 25 rather than 25 for 44.00.
I guess either Lowes was taking a beating or made a pricing mistake...
Edit....
Seems to be store dependent. So try stores in other cities for the discount price but then change the item location to your local store then add to cart.
I need a store that has the 25 for 15.....
Last edited by twbradford January 5, 2023 at 09:25 AM.
Grabbed a 100' in Bloomfield Ct. worker told me he had just sold 8 of them and was looking for the other 7 it showed in stock. I found 1 that was out of place but couldn't find the 25 or 50 footers. Some contractor was trying to buy all they had.
Grabbed a 100' in Bloomfield Ct. worker told me he had just sold 8 of them and was looking for the other 7 it showed in stock. I found 1 that was out of place but couldn't find the 25 or 50 footers. Some contractor was trying to buy all they had.
which one is the better buy? 25,50 or 100? i know it all depends on what we need. but its an impulse buy for me.
which one is the better buy? 25,50 or 100? i know it all depends on what we need. but its an impulse buy for me.
I was just purchasing for one of my sons that recently bought a house. Was trying to get one of each. Just let me order a 25' and 50' for in store pickup but pretty sure it will be canceled because they won't be able to find them. Worth a shot. 100' seems like a great deal.
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
Top Comments
So the question is how much current will be pulled through the extension cord. If you dissipate 1200W at 120V, that's 10 amps going through the extension cord (assuming a power factor of 1, I hope this is mostly reasonable), which gives you pretty good margin on the15A limit. It's also worth pointing out that "starting mode" means inherently that you aren't running it for more than a few seconds. If 12 gauge wire is rated for 15A , that almost certainly means continuously (12 gauge NM Romex would typically be rated for 20A continuous)... So, even if you exceeded 15A for a few seconds, it's a non-issue since heat takes a while to build up. It's pretty common for 120V welders to exceed 15A when the arc is first being struck, and it generally doesn't matter, the breakers don't even notice. In other words, there's a huge amount of margin.
What's more, most 120V single phase house wiring in the US is 12 or 14 gauge which is rated for 20A or 15A respectively, and tied to a 20A or 15A breaker respectively. So, it'd be really odd to manufacture a battery charger that exceeds 15A over more than a second or two since many breakers would be unhappy with it.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
170 Comments
Sign up for a Slickdeals account to remove this ad.
Thanks!
Also for a Tesla mobile connector charging, will a 10/3 be better than 12/3?
I used to roll it up on a wheel but learned that wasn't a good way to store it and have use the recommended way for the last 1 plus years. Hoping that this recommended way keeps the next cord in better shape longer.
I really wanted 25ft but I will take 50 for 25 rather than 25 for 44.00.
I guess either Lowes was taking a beating or made a pricing mistake...
Edit....
Seems to be store dependent. So try stores in other cities for the discount price but then change the item location to your local store then add to cart.
I need a store that has the 25 for 15.....
FYI, these things are Red, White, and Blue in honor of the Wounded Warrior Project, of which Southwire is a sponsor.
Lowes' new locker pickup option is a big improvement over their old pickup system. very quick and hassle free,.
Thanks again OP!
Sign up for a Slickdeals account to remove this ad.
Edit: Lowes just called and cancelled saying it's out of stock.
Our community has rated this post as helpful. If you agree, why not thank calpolycrew
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!