expired
Missed This Deal? Get alerts when similar deals are posted.
Deal Details
TwoTrees Laser Engraver TT-50 $188 - $50 = $138 Shipped
Coupon: TOT30
Final price: $138
https://www.twotrees3d.
Coupon: TOT30
Final price: $138
https://www.twotrees3d.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
TwoTrees Laser Engraver TT-50 $188 - $50 = $138 Shipped
Coupon: TOT30
Final price: $138
https://www.twotrees3d.
Coupon: TOT30
Final price: $138
https://www.twotrees3d.
Community Voting
Deal
Score
+5
Good Deal
Bad Deal
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
10 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
Keep in mind you will 100 percent need.
1. aftermarket OD6+ glasses in the wavelength of the laser ( all the provided glasses are ok but not great and if you value your eyesight!!) This laser uses Laser wavelength 450nm which is pretty common for diode laser.
2. an enclosure or a room you can lock down so no family, friends, pets are going to walk in when the laser is actively being used without a set of laser protective glasses. This is a high power laser and even very short reflections from a class 4 laser can cause permanant eye damage. Just wear laser protective glasses and make sure every one else in the room does as well and it is fine.
3. These machines produce a lot of smoke and fumes, and I mean a lot! the engraved line or cut out is not being cut out and made into chips or sawdust it is being vaporised into fumes and smoke. You will need very very good ventilation or an enclosure and ducting to vent this outside. Many things can product toxic fumes, Toxic like someone finds you dead in the room with the laser toxic ( You should research and not cut or engrave these at all) But if you do (many people do) VENT the fumes away !!
I picked up a Laser enclosure on amazon for $49 and 25' of 4 inch dryer hose for $30 and a 4 inch duct fan for $50 but you can get the fans for as little as $20 .
You are burning stuff with one of these lasers, burning stuff is a fire hazzard, a fireproof enclosure is your friend. Don't use a laser without someone watching for fires and keep fire extinguishers handy!
Keep in mind you will 100 percent need.
1. aftermarket OD6+ glasses in the wavelength of the laser ( all the provided glasses are ok but not great and if you value your eyesight!!) This laser uses Laser wavelength 450nm which is pretty common for diode laser.
2. an enclosure or a room you can lock down so no family, friends, pets are going to walk in when the laser is actively being used without a set of laser protective glasses. This is a high power laser and even very short reflections from a class 4 laser can cause permanant eye damage. Just wear laser protective glasses and make sure every one else in the room does as well and it is fine.
3. These machines produce a lot of smoke and fumes, and I mean a lot! the engraved line or cut out is not being cut out and made into chips or sawdust it is being vaporised into fumes and smoke. You will need very very good ventilation or an enclosure and ducting to vent this outside. Many things can product toxic fumes, Toxic like someone finds you dead in the room with the laser toxic ( You should research and not cut or engrave these at all) But if you do (many people do) VENT the fumes away !!
I picked up a Laser enclosure on amazon for $49 and 25' of 4 inch dryer hose for $30 and a 4 inch duct fan for $50 but you can get the fans for as little as $20 .
You are burning stuff with one of these lasers, burning stuff is a fire hazzard, a fireproof enclosure is your friend. Don't use a laser without someone watching for fires and keep fire extinguishers handy!
Keep in mind you will 100 percent need.
1. aftermarket OD6+ glasses in the wavelength of the laser ( all the provided glasses are ok but not great and if you value your eyesight!!) This laser uses Laser wavelength 450nm which is pretty common for diode laser.
2. an enclosure or a room you can lock down so no family, friends, pets are going to walk in when the laser is actively being used without a set of laser protective glasses. This is a high power laser and even very short reflections from a class 4 laser can cause permanant eye damage. Just wear laser protective glasses and make sure every one else in the room does as well and it is fine.
3. These machines produce a lot of smoke and fumes, and I mean a lot! the engraved line or cut out is not being cut out and made into chips or sawdust it is being vaporised into fumes and smoke. You will need very very good ventilation or an enclosure and ducting to vent this outside. Many things can product toxic fumes, Toxic like someone finds you dead in the room with the laser toxic ( You should research and not cut or engrave these at all) But if you do (many people do) VENT the fumes away !!
I picked up a Laser enclosure on amazon for $49 and 25' of 4 inch dryer hose for $30 and a 4 inch duct fan for $50 but you can get the fans for as little as $20 .
You are burning stuff with one of these lasers, burning stuff is a fire hazzard, a fireproof enclosure is your friend. Don't use a laser without someone watching for fires and keep fire extinguishers handy!
Sign up for a Slickdeals account to remove this ad.
Keep in mind you will 100 percent need.
1. aftermarket OD6+ glasses in the wavelength of the laser ( all the provided glasses are ok but not great and if you value your eyesight!!) This laser uses Laser wavelength 450nm which is pretty common for diode laser.
2. an enclosure or a room you can lock down so no family, friends, pets are going to walk in when the laser is actively being used without a set of laser protective glasses. This is a high power laser and even very short reflections from a class 4 laser can cause permanant eye damage. Just wear laser protective glasses and make sure every one else in the room does as well and it is fine.
3. These machines produce a lot of smoke and fumes, and I mean a lot! the engraved line or cut out is not being cut out and made into chips or sawdust it is being vaporised into fumes and smoke. You will need very very good ventilation or an enclosure and ducting to vent this outside. Many things can product toxic fumes, Toxic like someone finds you dead in the room with the laser toxic ( You should research and not cut or engrave these at all) But if you do (many people do) VENT the fumes away !!
I picked up a Laser enclosure on amazon for $49 and 25' of 4 inch dryer hose for $30 and a 4 inch duct fan for $50 but you can get the fans for as little as $20 .
You are burning stuff with one of these lasers, burning stuff is a fire hazzard, a fireproof enclosure is your friend. Don't use a laser without someone watching for fires and keep fire extinguishers handy!
How's does this compare to the hundreds of similar ones on AliExpress? I need one to engrave a logo on Walnut wood and leather.
1ftermarket od6+ glasses in the wavelength of the laser ( all the provided glasses are ok but not great and if you value your eyesight!!) this laser uses laser wavelength 450nm which is pretty common for diode laser.
2n enclosure or a room you can lock down so no family, friends, pets are going to walk in when the laser is actively being used without a set of laser protective glasseshis is a high power laser and even very short reflections from a class 4 laser can cause permanant eye damageust wear laser protective glasses and make sure every one else in the room does as well and it is fine.
3hese machines produce a lot of smoke and fumes, and i mean a lothe engraved line or cut out is not being cut out and made into chips or sawdust it is being vaporised into fumes and smokeou will need very very good ventilation or an enclosure and ducting to vent this outsideany things can product toxic fumes, toxic like someone finds you dead in the room with the laser toxic ( you should research and not cut or engrave these at all) but if you do (many people do) vent the fumes away ! picked up a laser enclosure on amazon for $49 and 25' of 4 inch dryer hose for $30 and a 4 inch duct fan for $50 but you can get the fans for as little as $20 ou are burning stuff with one of these lasers, burning stuff is a fire hazzard, a fireproof enclosure is your friendon't use a laser without someone watching for fires and keep fire extinguishers handy!
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!