Sorry, this deal has expired.
Get notified of deals like this in the future.
Add Deal Alert for this Item
Frontpage Deal
ANNKE Panoramic Outdoor PoE Dual Lens 6MP Security Camera EXPIRED
$90
$130.00
+ Free Shipping
ANNKE has ANNKE Panoramic Outdoor PoE Dual Lens 6MP Security Camera (FCD600) on sale for $89.99 when you apply promo code DBWX6V2C12NQ at checkout. Shipping is free.
Thanks to Staff Member the-press-box for sharing this deal.
Features:
Thanks to Staff Member the-press-box for sharing this deal.
Features:
- 6MP & BSI Sensor, Clearer Image
- Dual-lens Fusion Splicing 180° Ultra-wide Viewing Angle
- Smart Detection Motion 2.0, Brings 99% Accurate Alerts
- Pre-Active Defense with Siren Deterrence
- Day or Night, Full Color Design Restores the Real Scene
- Synchronized Pickup, Bid Farewell to Silent Monitoring
- Built to be Prominent in the Harshest Climates
- Remote APP Control
- Multiple Storage Methods
- Two-Way Audio
- IP66 rated;designed to work for extreme indoor & outdoor use from -22 °F/-30 °C to 140 °F/60 °C.
- Built-in TF card slot
- Supports up to 256GB Micro SD card
Editor's Notes & Price Research
Written by
- About this deal:
- This sale price is slightly less than this previous FrontPage Deal.
- About this product:
- Includes a 2-Year Limited Warranty
- Additional Seller Information:
- You can view the ANNKE Return Policy here.
- Additional Note:
- Please refer to the Forum Thread for additional discussion regarding this deal.
Good deal?
You gave rep to the-press-box | Staff for this post.
Thank you!
the-press-box | Staff posted this deal. Say thanks!
Thank you!
the-press-box | Staff posted this deal. Say thanks!
Original Post
Written by
Edited March 21, 2023
at 08:49 AM
If you purchase something through a post on our site, Slickdeals may get a small share of the sale.
Check Out Similar Tech & Electronics Deals
View AllFrontpage Deal
$149
+ Free Shipping
61
68
Frontpage Deal
Frontpage Deal
$99
& More + Free Shipping
62
62
Frontpage Deal
$6
+ Free Shipping
50
28
About the OP
52 Comments
Your comment cannot be blank.
Featured Comments
"Directly from Annke, I bought 2- Annke FCD600 (I51DW) dual lens 180 cameras to use with my Annke 16-ch NVR (N46PCK). Their site listed the camera as ONVIF and supported with my NVR. I couldn't ever get both of the cameras to work with my NVR.
Contacted their customer service on their Q&A forum regarding the issue. They stated that my NVR was an early build of the N46PCK model that isn't compatible due to hardware/firmware, it was like 6m-1yr too early. They suggested I return to get a refund or run it with a separate PoE gigabit switch, which it did work.
I wish they would of specified the factory build/firmware limitation before buying them."
::Edit::
I tried to find the link to my post with tech support but it may have been removed.
/////
I received two FCD600 and tried testing both units to see their field of view. I'm not sure how long it takes for these units to connect to N46PCK NVR, after several minutes both didn't connect. I used both of the short ethernet cable provided and even connected to cables I ran to C800 and C500 around my property. I've tried putting the NVR to Factory Default, then even upgraded the firmware to V4.30.010, Build 210511.
Under Configuration>Camera>IP Channel, The FCD600 flashes while its detecting, then eventually shows connecting, now its showing Exception. It also causes Channel 5 to show exception. Viewing PoE Settings, FCD600 is only showing 3.4W of Actual Power where the other 6 cameras are between 5.7-6.3W.
Channel 5 is locked out.
/////
Dear XXXXXX,
Thanks for contacting us. This is XXXXX from ANNKE Technical Support.
I regret to tell you the earlier version of the NVR like V4.30.010, Build 210511 is NOT compatible with the FCD600 camera, because the NVR uses different hardwares. Therefore, I suggest you use the FCD600 camera alone without the NVR.
If Channel 5 is locked out, please go to 'Default' to reset the NVR to Inactive and then activate the NVR again.
Looking forward to hearing from you soon.
Best Regards,
XXXXX| Technical Support
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
"Directly from Annke, I bought 2- Annke FCD600 (I51DW) dual lens 180 cameras to use with my Annke 16-ch NVR (N46PCK). Their site listed the camera as ONVIF and supported with my NVR. I couldn't ever get both of the cameras to work with my NVR.
Contacted their customer service on their Q&A forum regarding the issue. They stated that my NVR was an early build of the N46PCK model that isn't compatible due to hardware/firmware, it was like 6m-1yr too early. They suggested I return to get a refund or run it with a separate PoE gigabit switch, which it did work.
I wish they would of specified the factory build/firmware limitation before buying them."
::Edit::
I tried to find the link to my post with tech support but it may have been removed.
/////
I received two FCD600 and tried testing both units to see their field of view. I'm not sure how long it takes for these units to connect to N46PCK NVR, after several minutes both didn't connect. I used both of the short ethernet cable provided and even connected to cables I ran to C800 and C500 around my property. I've tried putting the NVR to Factory Default, then even upgraded the firmware to V4.30.010, Build 210511.
Under Configuration>Camera>IP Channel, The FCD600 flashes while its detecting, then eventually shows connecting, now its showing Exception. It also causes Channel 5 to show exception. Viewing PoE Settings, FCD600 is only showing 3.4W of Actual Power where the other 6 cameras are between 5.7-6.3W.
Channel 5 is locked out.
/////
Dear XXXXXX,
Thanks for contacting us. This is XXXXX from ANNKE Technical Support.
I regret to tell you the earlier version of the NVR like V4.30.010, Build 210511 is NOT compatible with the FCD600 camera, because the NVR uses different hardwares. Therefore, I suggest you use the FCD600 camera alone without the NVR.
If Channel 5 is locked out, please go to 'Default' to reset the NVR to Inactive and then activate the NVR again.
Looking forward to hearing from you soon.
Best Regards,
XXXXX| Technical Support
Sign up for a Slickdeals account to remove this ad.
Am interested to know this as well.