EcoFlow via eBay has
1260Wh EcoFlow DELTA Portable Power Station Generator (Certified Refurbished) on sale for
$425.55 when you apply coupon codes
EFDELTA15 &
REFURBSAVINGS during checkout.
Shipping is free.
Thanks to Community Member
sdhl for sharing this deal.
About this Item:
- 1260Wh Capacity
- Outputs up to 1800W constant, 3000W surge
- Charges to full capacity in 2 hours via AC outlet
- Can be charged via solar panel (not included)
- Ports:
- 6x AC output
- 4x USB-A
- 2x USB-C
- 1x 12V DC car socket
- Includes a 2-year warranty serviced by Allstate.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
128 Comments
Sign up for a Slickdeals account to remove this ad.
Edit: went ahead and pulled the trigger. Hopefully they're barely used
Sign up for a Slickdeals account to remove this ad.
I want to print PLA at connection center, but not sure if this will be enough for a few hours of print
If so, get a generator. As long as you have fuel - you can print.
If so, get a generator. As long as you have fuel - you can print.
If it can run my 15 amp table saw then I'm keeping it.
Btw, the people who keep saying that you only have a few hundred charge cycles before it dies are utterly clueless. Those ratings are for the capacity degradation to 80%. I'm sure everyone owns a device that's at least 10 years old and still has a working battery, so this is no different.
By the time this wears out LiFePo4 may be just as affordable, so buying this today plus LiFePo4 in 3 years probably costs the same as buying just the LiFePo4 today, so doing it this way you end up with two devices: one of them being basically free and the other being fresh off the press.
Apologies to SyL.
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!