EcoFlow via eBay has
1260Wh EcoFlow DELTA Portable Power Station Generator (Certified Refurbished) on sale for
$425.55 when you apply coupon codes
EFDELTA15 &
REFURBSAVINGS during checkout.
Shipping is free.
Thanks to Community Member
sdhl for sharing this deal.
About this Item:
- 1260Wh Capacity
- Outputs up to 1800W constant, 3000W surge
- Charges to full capacity in 2 hours via AC outlet
- Can be charged via solar panel (not included)
- Ports:
- 6x AC output
- 4x USB-A
- 2x USB-C
- 1x 12V DC car socket
- Includes a 2-year warranty serviced by Allstate.
Leave a Comment
128 Comments
Sign up for a Slickdeals account to remove this ad.
Edit: went ahead and pulled the trigger. Hopefully they're barely used
Sign up for a Slickdeals account to remove this ad.
I want to print PLA at connection center, but not sure if this will be enough for a few hours of print
If so, get a generator. As long as you have fuel - you can print.
If so, get a generator. As long as you have fuel - you can print.
If it can run my 15 amp table saw then I'm keeping it.
Btw, the people who keep saying that you only have a few hundred charge cycles before it dies are utterly clueless. Those ratings are for the capacity degradation to 80%. I'm sure everyone owns a device that's at least 10 years old and still has a working battery, so this is no different.
By the time this wears out LiFePo4 may be just as affordable, so buying this today plus LiFePo4 in 3 years probably costs the same as buying just the LiFePo4 today, so doing it this way you end up with two devices: one of them being basically free and the other being fresh off the press.
Apologies to SyL.
Sign up for a Slickdeals account to remove this ad.
Leave a Comment