Assuming this chassis structure is exactly the same as the NAB6, you should be able to use this 3D print model [thingiverse.com]to bring a different lid color to the table. There's also a lid that allows for the passthrough of PCIe Cabling when adapting the M.2 slot.
## What would you do with the PCIe lid setup?
Here's at least one idea [reddit.com]to hook up 8x 3.5" hard drives.

## Any other notables?
The NAB6 at least, has two 2.5Gbe NICs. They are both Intel NICs which can be important for those that don't like to deal with Realtek compatibility.

Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
39 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
Also note, if you need more network ports there are STLs to 3D print new lids and you can get expansion cards that replace the wifi key slot and can mount to the new lid.
Is this the STL file ?
https://www.thingiverse
Not sure if that one will fit the model listed here. But I see that there is a open slot to run the PCIe cable for eGPU.
Sign up for a Slickdeals account to remove this ad.
https://www.geekompc.co
Our community has rated this post as helpful. If you agree, why not thank
https://www.geekompc.co
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!