expired
Missed This Deal? Get alerts when similar deals are posted.
+ Free Shippingat ANNKE
Deal Details
Annke has Annke NightChroma NC800 4K Outdoor PoE Security Camera (Black Turret) for $139.99. Shipping is free.
Thanks to Community Member mat2000 for finding this deal.
Available:Features:
Thanks to Community Member mat2000 for finding this deal.
Available:Features:
- Image Sensor: 1/1.2" Progressive Scan CMOS
- Night Vision Distance: Up to 130 ft/40 m
- Image Enhancement: BLC, HLC, 3D DNR
- Wide Dynamic Range: 130 dB WDR
- Face Capture: Yes
- Network Storage: MicroSD/SDHC/SDXC card (256 GB) Local Storage, and NAS (NFS, SMB/CIFS)
- Perimeter Protection: Line Crossing Detection, Intrusion Detection, Region Entrance Detection, Region Exiting Detection
- Works with Alexa
Editor's Notes
Written by powerfuldoppler | Staff- About this deal:
- Please read the Forum Thread for more deal discussion.
- No longer available:
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Annke has Annke NightChroma NC800 4K Outdoor PoE Security Camera (Black Turret) for $139.99. Shipping is free.
Thanks to Community Member mat2000 for finding this deal.
Available:Features:
Thanks to Community Member mat2000 for finding this deal.
Available:Features:
- Image Sensor: 1/1.2" Progressive Scan CMOS
- Night Vision Distance: Up to 130 ft/40 m
- Image Enhancement: BLC, HLC, 3D DNR
- Wide Dynamic Range: 130 dB WDR
- Face Capture: Yes
- Network Storage: MicroSD/SDHC/SDXC card (256 GB) Local Storage, and NAS (NFS, SMB/CIFS)
- Perimeter Protection: Line Crossing Detection, Intrusion Detection, Region Entrance Detection, Region Exiting Detection
- Works with Alexa
Editor's Notes
Written by powerfuldoppler | Staff- About this deal:
- Please read the Forum Thread for more deal discussion.
- No longer available:
Community Voting
Deal
Score
+20
Good Deal
Bad Deal
Top Comments
Looks like it has white light LEDs, not IR LEDs .. so it may not be able to go into IR mode.
Which should be OK if you have enough white light around .. ( street lights, .. etc )
This is a Hikvision OEM camera, and most of those meet specs well so this should work well with Hikvision NVRs than can handle the resolution and bandwidth, as well as 3rd party NVRs / VMS ( like Blue Iris ).
Remember most IP PoE cameras do not come with PSE ( Power Sourcing Equipment ) .. many prefer a PoE switch for this.
Remember for best results you want to mount this to reduce the chances of water ingress .. ( look at ipcamtalk for notes on this topic .. hint drip loops, di-electric gel, coax seal or plumbers silicone stretch tape, and .. )
Thanks @MicahJames .. definitely a good deal on a 1/1.2" in my book
Hi Tayninh
For a Dahua OEM NVR I'd look for EmpireTecAndy at ipcamtalk .. should be able to find a reference there to his Amazon store front also ..
Otherwise, hard lately to find NVR deals
I think a lot of ipcamtalk member prefer to go the Used business class PC + Blue Iris + PoE switch
note, btw this is a Hikvision OEM camera .. so the Dahua NVR will provide limited support to the advanced features of the camera.
( need to double check the ONVIF versions supported .. )
Thanks @MadPup
Funny, some reviews ( example a lot of the 1-star ones ) clearly do not know what they are talking about .. ( they're new to PoE cameras for example and expected this camera to be standalone and not needing to run a cat5e/cat6 cable to it .. )
Hi Therepairguy
the 4MP 1/1.8" sensor cameras are still very good, even compared to this one.
the 8MP 1/1.2" sensor cameras that have come out, clearly do much better than the 8MP 1/1.8" sensor model cameras.
HI @luniz97
From a basic recording point, this should work as it meets specs well.
For the more advanced features ( detection features ), my guess is the synology may not support them as well as we'd like - however, I really am not 100% certain - so you'll want to double check that.
Hi @Kherbinoskie,
I would expect similar on this as mentioned for luniz97 ...
Do double check the ONVIF levels on the Qnap and this camera .. should at least work for the basic compatibility
Thanks @fawzi, repped
HI Mrsleepi
Larger sensor than most of the 8MP cameras we see posted here .. thus it will do better in low light image capture.
HI @Pandy00 ..
Great question .. Annke's return policy .. would be nice to see a price match at Amazon .. I'd feel a lot better with that return policy.
Hopefully others who have used Annke recently can help us with this question.
Hi @suepafly
Did you run new cat5e/6 cables ?
Are the cables CCA or copper wired ?
Remember to trouble shot how they were installed.
If you live in a lightening area, CCTV / IP PoE cameras can get fried by nearby hits.
Reolink Cameras seem to work best with Reolink NVRs.
Many are using the Reolink cameras that meet rtsp specs with Blue Iris or similar .. if you go that route you can mix Hikvision OEM, Reolink, and other cameras. ..
Hi Mbis,
Yes .. these should work .. double check resolution and bandwidth on the NVR .. as well the tier level the NVR supports. Chances are older NVRs will not support the new advanced features ..
Yes ronlee and heiNey ..
Most of the Lorex kits are Dahua OEM of recent years ..
If the NVR supports ONVIF you can set the channel to ONVIF and the camera to ONVIF and get the basics to work.
The advanced features may not.
Remember to double check the bandwidth the NVR supports and is using .. you may need to lower fps on some of the more affordable NVRs.
Thanks Harry, and repped.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
80 Comments
Sign up for a Slickdeals account to remove this ad.
Apparently the camera plus light on full brightness consumes 9 watts. A typical camera with no light on might consume about 2-3 watts. IR usually adds a watt or 2, but as I mentioned, it doesn't appear to be equipped.
The larger the sensor, the better low light capability. This is considered a pretty big sensor for a security camera and should perform well at night, but I have no experience with it.
I dislike the wide field of view. It's useful to see if something is around, but too wide to identify someone unless they get very close.
Sign up for a Slickdeals account to remove this ad.
(not sure if it has to be manually added. I just left it in the cart and they emailed it to me. That old trick
I always leave food them.
Our community has rated this post as helpful. If you agree, why not thank
Looks like it has white light LEDs, not IR LEDs .. so it may not be able to go into IR mode.
Which should be OK if you have enough white light around .. ( street lights, .. etc )
This is a Hikvision OEM camera, and most of those meet specs well so this should work well with Hikvision NVRs than can handle the resolution and bandwidth, as well as 3rd party NVRs / VMS ( like Blue Iris ).
Remember most IP PoE cameras do not come with PSE ( Power Sourcing Equipment ) .. many prefer a PoE switch for this.
Remember for best results you want to mount this to reduce the chances of water ingress .. ( look at ipcamtalk for notes on this topic .. hint drip loops, di-electric gel, coax seal or plumbers silicone stretch tape, and .. )
For a Dahua OEM NVR I'd look for EmpireTecAndy at ipcamtalk .. should be able to find a reference there to his Amazon store front also ..
Otherwise, hard lately to find NVR deals
I think a lot of ipcamtalk member prefer to go the Used business class PC + Blue Iris + PoE switch
note, btw this is a Hikvision OEM camera .. so the Dahua NVR will provide limited support to the advanced features of the camera.
( need to double check the ONVIF versions supported .. )
Funny, some reviews ( example a lot of the 1-star ones ) clearly do not know what they are talking about .. ( they're new to PoE cameras for example and expected this camera to be standalone and not needing to run a cat5e/cat6 cable to it .. )
the 4MP 1/1.8" sensor cameras are still very good, even compared to this one.
the 8MP 1/1.2" sensor cameras that have come out, clearly do much better than the 8MP 1/1.8" sensor model cameras.
From a basic recording point, this should work as it meets specs well.
For the more advanced features ( detection features ), my guess is the synology may not support them as well as we'd like - however, I really am not 100% certain - so you'll want to double check that.
I would expect similar on this as mentioned for luniz97 ...
Do double check the ONVIF levels on the Qnap and this camera .. should at least work for the basic compatibility
Larger sensor than most of the 8MP cameras we see posted here .. thus it will do better in low light image capture.
Anyone know how Annke's return policy is?
Great question .. Annke's return policy .. would be nice to see a price match at Amazon .. I'd feel a lot better with that return policy.
Hopefully others who have used Annke recently can help us with this question.
Did you run new cat5e/6 cables ?
Are the cables CCA or copper wired ?
Remember to trouble shot how they were installed.
If you live in a lightening area, CCTV / IP PoE cameras can get fried by nearby hits.
Reolink Cameras seem to work best with Reolink NVRs.
Many are using the Reolink cameras that meet rtsp specs with Blue Iris or similar .. if you go that route you can mix Hikvision OEM, Reolink, and other cameras. ..
Yes .. these should work .. double check resolution and bandwidth on the NVR .. as well the tier level the NVR supports. Chances are older NVRs will not support the new advanced features ..
Would be great if i'm wrong.
Most of the Lorex kits are Dahua OEM of recent years ..
If the NVR supports ONVIF you can set the channel to ONVIF and the camera to ONVIF and get the basics to work.
The advanced features may not.
Remember to double check the bandwidth the NVR supports and is using .. you may need to lower fps on some of the more affordable NVRs.
Almost all ANKEs I have seen support ONVIF. The same is not true though for Reolink
As regards this camera, I believe "Nighchroma" is achieved by turning on those two small white lights which may or may not work for everyone. In my case I turned it off as it could be disturbing to the neighbors and have it set to just the IR LEDs. With the IR LEDs the nigh vision is not as good. I wont say poor, but even a FOSCAM does better than the ANNKEs for regular nightvision. Of course turning on the White light makes a big difference.
...
Hi @suepafly
Did you run new cat5e/6 cables ?
Are the cables CCA or copper wired ?
Remember to trouble shot how they were installed.
If you live in a lightening area, CCTV / IP PoE cameras can get fried by nearby hits.
Reolink Cameras seem to work best with Reolink NVRs.
Many are using the Reolink cameras that meet rtsp specs with Blue Iris or similar .. if you go that route you can mix Hikvision OEM, Reolink, and other cameras. ..
...
Thanks Harry, and repped.
Did you run new cat5e/6 cables ?
No, strangely the house is new (3 years old) but they terminated Cat5 using BNC adapters/power at both ends.
Are the cables CCA or copper wired ?
Copper I believe, they weren't super flexible like copper clad
Remember to trouble shot how they were installed.
It could be failing because of the wiring, they are mounted super high and maybe my crimper missed a pin - I have since bought a new crimper. The reason I'm open to the change of camera is because I don't love the night vision on the Reolinks, I'm interested to see how Nightchroma will look.
If you live in a lightening area, CCTV / IP PoE cameras can get fried by nearby hits.
Reolink Cameras seem to work best with Reolink NVRs.
Many are using the Reolink cameras that meet rtsp specs with Blue Iris or similar .. if you go that route you can mix Hikvision OEM, Reolink, and other cameras. ..
I went back to Blue Iris (after not owning security cameras for 6 years) because the DVR that came with our home was pretty horrible and had no real branding and no access outside of hdmi viewing. The Reolinks work well in Blue Iris, so long as you manually enable RTSP/ONVIF in settings using their pc app - they were disabled by default on my cameras.
Editted so it wouldn't quote the entire post
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!