Original Post
Written by
Edited August 22, 2023
at 03:21 PM
by
Made with premium components in the same factory as their iconic guitars.
https://www.fender.com/en-US/part...46500.html
ALSO...
Pre-wired Strat Pickguard with HSS Shawbucker in the bridge position and 2 Gen 4 Noiseless in the neck and middle. $174.99
https://www.fender.com/en-US/part...47500.html
23 Comments
Your comment cannot be blank.
Featured Comments
Thanks again OP, repped!
Sign up for a Slickdeals account to remove this ad.
These aren't a true vintage tone pickup as they are a bit hotter anyway. That said the cleans are very good, can produce some great dirt and the S1 switching is much more than hype, can produce some fantastic tones.
Sure they may not be a true vintage tone they produce very very good Strat tones without the hum and even more combinations with the S1 switching.
For this price, well worth it. Even if ya change the pickguard to match your guitar
This is an awesome post/deal! Repped OP right away. That said, I bought a made in Mexico with the original single coils and they were so noisy but they sounded good/vintage at the same time. I replaced them with the generation 4 set, and the hum is completely gone... but so is that vintage sound. I was a little surprised to see people thumbing down the other folks in this post who tried to point out that noiseless pickups do not give you the same tone that the originals do. Since I didn't do any research, you can imagine my dismay when I plugged in for the first time after having them replaced. Just sharing my experience.
Epiphone strat? 🤔
This! As others have said, noiseless PU's do not sound the same as the originals. So much so that I may be pulling my Gen4 PUs out and putting the originals back in. I wish I had followed your advice as I never would have swapped them.
Sign up for a Slickdeals account to remove this ad.