Amazon has BOSCH 12'' Extension for Daredevil Spade Drill Bits (DSBE1012) on sale for $4.85. Shipping is free w/ Prime or on $25+ or $35+ orders (minimum requirement varies by location).
Thanks to Community Member mobx for sharing this deal.
Product Information:
Used for power tool accessories, drill bits & accessories
The product is manufactured in China
Features a full cone threaded tip for fast and effortless drilling
You can also earn cash back rewards on Amazon and Whole Foods purchases with the Amazon Prime Visa credit card. Read our review to see if it's the right card for you.
Additional Note:
Please refer to the Forum Thread for additional discussion regarding this deal.
This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
Amazon has BOSCH 12'' Extension for Daredevil Spade Drill Bits (DSBE1012) on sale for $4.85. Shipping is free w/ Prime or on $25+ or $35+ orders (minimum requirement varies by location).
Thanks to Community Member mobx for sharing this deal.
Product Information:
Used for power tool accessories, drill bits & accessories
The product is manufactured in China
Features a full cone threaded tip for fast and effortless drilling
You can also earn cash back rewards on Amazon and Whole Foods purchases with the Amazon Prime Visa credit card. Read our review to see if it's the right card for you.
Additional Note:
Please refer to the Forum Thread for additional discussion regarding this deal.
I have six of these and they are definitely hex in the shank, but are round at the coupling sleeve with two beefy set screws which tightly connect a hex shank. They have been amazing at running speaker cables in floor joists and wall studs alike. I have literally made a six-footer out of six of them, which requires careful alignment and levelling and the judicious use of an inspection camera, but allows wire installation without removing the drywall...
The set screw ensures that a hex bit doesn't slip out. If you have a cutout in a 16" spaced void, you can fairly easily install a 12" section, tighten the set screw, add another, etc.
With only one of these, it makes for a decent installer bit as long as the spade bit is larger than the diameter of the sleeve.
15 Comments
Sign up for a Slickdeals account to remove this ad.
Decent price, as I paid $7.45 for it back in July.
The title may be misleading to some, as this extension works with any 1/4" hex shank bit, such as the Irwin wood bits that were on the front page for quite awhile in June/July.
Decent price, as I paid $7.45 for it back in July.
The title may be misleading to some, as this extension works with any 1/4" hex shank bit, such as the Irwin wood bits that were on the front page for quite awhile in June/July.
Very odd that it's a hex extension but on the remote end it's circular with a set screw. Seems like there's a lot of potential for stripping there as more than a few of the reviews indicate.
Very odd that it's a hex extension but on the remote end it's circular with a set screw. Seems like there's a lot of potential for stripping there as more than a few of the reviews indicate.
Upon closer look you're right it's not a hex extension. For those looking for a hex extension here's a 6" one for $3.71 https://a.co/d/a79rdmU
Upon closer look you're right it's not a hex extension. For those looking for a hex extension here's a 6" one for $3.71 https://a.co/d/a79rdmU
Yeah, I found it odd, even did a sort of reviews by date just in case it was an artifact from older reviews from a previous product. No dice, it's not hex which would significantly compromise the amount of torque you'd get out of it. My guess is on a longer extension of this type the material that it's made out of isn't strong enough to withstand the torque that would be applied by an impact tool.
Our community has rated this post as helpful. If you agree, why not thank Mjoelnir
I have six of these and they are definitely hex in the shank, but are round at the coupling sleeve with two beefy set screws which tightly connect a hex shank. They have been amazing at running speaker cables in floor joists and wall studs alike. I have literally made a six-footer out of six of them, which requires careful alignment and levelling and the judicious use of an inspection camera, but allows wire installation without removing the drywall...
The set screw ensures that a hex bit doesn't slip out. If you have a cutout in a 16" spaced void, you can fairly easily install a 12" section, tighten the set screw, add another, etc.
With only one of these, it makes for a decent installer bit as long as the spade bit is larger than the diameter of the sleeve.
Last edited by Mjoelnir September 24, 2023 at 11:37 PM.
I have six of these and they are definitely hex in the shank, but are round at the coupling sleeve with two beefy set screws which tightly connect a hex shank. They have been amazing at running speaker cables in floor joists and wall studs alike. I have literally made a six-footer out of six of them, which requires careful alignment and levelling and the judicious use of an inspection camera, but allows wire installation without removing the drywall...
The set screw ensures that a hex bit doesn't slip out. If you have a cutout in a 16" spaced void, you can fairly easily install a 12" section, tighten the set screw, add another, etc.
With only one of these, it makes for a decent installer bit as long as the spade bit is larger than the diameter of the sleeve.
Impressive. Never would have thought about doing this.
Top Comments
https://a.co/d/a79rdmU
The set screw ensures that a hex bit doesn't slip out. If you have a cutout in a 16" spaced void, you can fairly easily install a 12" section, tighten the set screw, add another, etc.
With only one of these, it makes for a decent installer bit as long as the spade bit is larger than the diameter of the sleeve.
15 Comments
Sign up for a Slickdeals account to remove this ad.
The title may be misleading to some, as this extension works with any 1/4" hex shank bit, such as the Irwin wood bits that were on the front page for quite awhile in June/July.
The title may be misleading to some, as this extension works with any 1/4" hex shank bit, such as the Irwin wood bits that were on the front page for quite awhile in June/July.
https://a.co/d/a79rdmU
https://a.co/d/a79rdmU
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank Mjoelnir
The set screw ensures that a hex bit doesn't slip out. If you have a cutout in a 16" spaced void, you can fairly easily install a 12" section, tighten the set screw, add another, etc.
With only one of these, it makes for a decent installer bit as long as the spade bit is larger than the diameter of the sleeve.
The set screw ensures that a hex bit doesn't slip out. If you have a cutout in a 16" spaced void, you can fairly easily install a 12" section, tighten the set screw, add another, etc.
With only one of these, it makes for a decent installer bit as long as the spade bit is larger than the diameter of the sleeve.
https://a.co/d/a79rdmU