JBL has
JBL Stage A170 Dual 5.25" Floorstanding Loudspeaker (Black, Single) on sale for
$99.99 (price reflected in cart).
Shipping is free.
Thanks to Deal Hunter
niki4h for sharing this deal.
- Additional Savings: Sign up for the JBL newsletter (bottom of the home page) to receive a $10 Off $150 unique code which you could use to purchase 2 speakers for $189.98.
About this Item:
- 2 x 5.25-inch (133mm) Polycellulose Low-Frequency Woofer
- 1-inch (25mm) Aluminum Dome Tweeter
- New High Definition Imaging (HDI) Waveguide
- Recommended Amplifier Power: 20 – 200W
- Frequency Response: 44Hz – 40kHz
- Sensitivity: 89dB @ 1M, 2.83V
- Nominal Impedance: 6 Ohms
- Crossover Frequencies: 1.8kHz, 2.8kHz
- Enclosure Type: Bass-Reflex via Rear-Firing Tuned Port
- Dimensions (W x D x H):190 x 255 x 930mm
- Weight: 31.61 lbs (14.34kg)
Leave a Comment
Top Comments
25 Comments
Sign up for a Slickdeals account to remove this ad.
2.5 way, dual 5.25", 1" aluminum tweeter floor standing loudspeaker
2 x 5.25" (133mm) Polycellulose Low-Frequency Woofer
New High Definition Imaging (HDI) Waveguide 1" (25mm) Aluminum Dome Tweeter
Recommended Amplifier Power: 20 – 200W
Frequency Response: 44Hz – 40kHz
Sensitivity: 89dB @ 1M, 2.83V
Nominal Impedance: 6 Ohms
Crossover Frequencies: 1.8kHz, 2.8kHz
Enclosure Type: Bass-Reflex via Rear-Firing Tuned Port
Dimensions (W x D x H): 190 x 255 x 930mm
Weight: 31.61 lbs (14.34kg)
So if my amp gives power ratings at 4ohms and 8ohms and this is at 6ohms I can take the middle power output between the 4ohm and 8ohm ratings?
Should I assume the 200W rating is RMS?
2.5 way, dual 5.25", 1" aluminum tweeter floor standing loudspeaker
2 x 5.25" (133mm) Polycellulose Low-Frequency Woofer
New High Definition Imaging (HDI) Waveguide 1" (25mm) Aluminum Dome Tweeter
Recommended Amplifier Power: 20 – 200W
Frequency Response: 44Hz – 40kHz
Sensitivity: 89dB @ 1M, 2.83V
Nominal Impedance: 6 Ohms
Crossover Frequencies: 1.8kHz, 2.8kHz
Enclosure Type: Bass-Reflex via Rear-Firing Tuned Port
Dimensions (W x D x H): 190 x 255 x 930mm
Weight: 31.61 lbs (14.34kg)
So if my amp gives power ratings at 4ohms and 8ohms and this is at 6ohms I can take the middle power output between the 4ohm and 8ohm ratings?
Should I assume the 200W rating is RMS?
https://slickdeals.net/e/6524014-pioneer-sp-fs52-5-25-floorstanding-speaker-60-frys
Sign up for a Slickdeals account to remove this ad.
https://slickdeals.net/e/6524014-pioneer-sp-fs52-5-25-floorstanding-speaker-60-frys
Those T50's are lame. And this is coming from a Polk fan.
Sign up for a Slickdeals account to remove this ad.
Leave a Comment