US.Store.Bambulab has
Bambu Lab P1S 3D Printer on sale for
$849.
Shipping is free.
Thanks to community member
2Nutz for finding this deal
Note, purchase of this printer will grant your
6-Months of Bambu Filament Membership benefits for
Free
Lead time for product is ETA before December 5, 2023.
About the Product- Enclosed-body for high-temperature filament printing
- Up to 16-color printing with AMS
- Up to 20000 mm/s² acceleration, prints a benchy in 18min
- Well-polished hardware and software
- Built-in camera for remote monitoring and timelapse
110 Comments
Your comment cannot be blank.
Featured Comments
3d printer designs have been stagnant for 3-4 years, they brought some good competition to market (think tesla).
You don't have to like it, or support them, but without them I doubt you'd see so many competing coreXY klipper based machines out there.
Locked down propriety machines will come and go
1) Dry box for open spools.
2) Keep an extra spool of the same color filament and have it automagically use the next same color spool for long prints.
3) Multicolor by layers. It minimizes waste and you don't have to manually switch colors at layers.
Sign up for a Slickdeals account to remove this ad.
Idk if I should at this price. Is this the historic low?
Our community has rated this post as helpful. If you agree, why not thank jrinco11
Idk if I should at this price. Is this the historic low?
Our community has rated this post as helpful. If you agree, why not thank topxnbo
Our community has rated this post as helpful. If you agree, why not thank thedavidk
Sign up for a Slickdeals account to remove this ad.
Check with your store manager when you do that. I was told you only get one adjustment during the 30 day window. So if microcenter further drops price, say to match the $849 from Bambu site, you can't adjust price the second time.
My local Microcenter denied the price match btw, def up to the manager, so YMMV!
Edit: Went physically and they price matched
Most of the reason to buy is for the ams. It's not necessarily for color prints. You can do multi-material, support interface material, and simply not having to change most-used filaments between prints.